EN ISO 25197-2012 en Small craft - Electrical electronic control systems for steering shift and throttle (Incorporates Amendment A1 2014)《小工艺品 电子 电气控制系统为指导 转变和节流阀》.pdf

1、BSI Standards PublicationSmall craft Electrical/electronic control systems for steering, shift and throttleBS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014BS EN ISO 25197:2012+A1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 25197:2012+A1:2014. It is

2、identical to ISO 25197:2012, incorporating amendment 1:2014. It supersedes BS EN ISO 25197:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GME/33, Small craft.A list of organizations represented on this committee can be obtained on request to its

3、 secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 83947 4ICS 47.080Compliance with a British Standard can

4、not confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments/corrigenda issued since publicationDate Text affected31 December 2014 Implementation of ISO amendment 1:2014 with CEN endors

5、ement A1:2014: subclause 10.8 replacedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25197 December 2012 ICS 47.080 English Version Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) Petits navires - Systmes lectriques/lectroniques pour le

6、 contrle de la direction, de linverseur et des gaz (ISO 25197:2012) Kleine Wasserfahrzeuge - Elektrisches/elektronisches Regelungssystem fr Steuerung, Schaltung und Antrieb (ISO 25197:2012) This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/C

7、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

8、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

9、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

10、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploita

11、tion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25197:2012: EBS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014EN ISO 25197:2012+A1December 2014EN ISO 25197:2012 (E) 2 Contents Page Foreword . 3 Annex ZA (informative) Relationship between this European St

12、andard and the Essential Requirements of EU Directive 94/25/EC as amended by Directive 2003/44/EC . 4 BS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014EN ISO 25197:2012+A1:2014 (E)EN ISO 25197:2012/A1:2014 (E) 3 Foreword This document (EN ISO 25197:2012/A1:2014) has been prepared by Technical Committ

13、ee ISO/TC 188 “Small craft”. This Amendment to the European Standard EN ISO 25197:2012 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by Ju

14、ne 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European

15、Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA in EN ISO 25197:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following c

16、ountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

17、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25197:2012/Amd 1:2014 has been approved by CEN as EN ISO 25197:2012/A1:2014 without any modification. EN ISO 25197:2012 (E) 3 Foreword This document (EN ISO 2

18、5197:2012) has been prepared by Technical Committee ISO/TC 188 “Small craft“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at th

19、e latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by

20、 the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national stand

21、ards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

22、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25197:2012 has been approved by CEN as a EN ISO 25197:2012 without any modification. BS EN ISO 25197:2012EN ISO 25197:201

23、2 (E) 3 Foreword This document (EN ISO 25197:2012) has been prepared by Technical Committee ISO/TC 188 “Small craft“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting nat

24、ional standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been

25、prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC

26、Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan

27、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25197:2012 has been approved by CEN as a EN ISO 25197:2012 without any modificati

28、on. BS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014EN ISO 25197:2012+A1:2014 (E)EN ISO 25197:2012/A1:2014 (E) 3 Foreword This document (EN ISO 25197:2012/A1:2014) has been prepared by Technical Committee ISO/TC 188 “Small craft”. This Amendment to the European Standard EN ISO 25197:2012 shall be gi

29、ven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be t

30、he subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Dire

31、ctive(s). For relationship with EU Directive(s), see informative Annex ZA in EN ISO 25197:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cypru

32、s, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

33、Kingdom. Endorsement notice The text of ISO 25197:2012/Amd 1:2014 has been approved by CEN as EN ISO 25197:2012/A1:2014 without any modification. Foreword to amendment A1EN ISO 25197:2012 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Di

34、rective 94/25/EC as amended by Directive 2003/44/EC This European Standard has been prepared under a mandate given to CEN by the European Commission to provide one means of conforming to Essential Requirements of the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC. Once this stand

35、ard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one member state, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presump

36、tion of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and EU Directives Clauses/subclauses of this European Standard Corresponding annexes/paragraphs of Directive 94/25/EC as amended by

37、Directive 2003/44/EC Comments All Annex I.A.2, Clause 5.4, Steering system WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014EN ISO 25197:2012+A1:2014 (E)ISO 25197:2012(E) I

38、SO 2012 All rights reserved iiiContents Page1 Scope 12 Normative references . 13 Terms and definitions . 24 General requirements . 45 Control head . 56 Command station transfer 67 Portable helm station controls 68 Dynamic-positioning system (DPS) . 79 Failure modes and responses . 89.1 Loss of opera

39、tion 89.2 Loss of computer command logic 810 Test requirements 810.1 General test requirements 810.2 Steering 810.3 Joystick 910.4 Control lever, single or combined, shift and throttle .1010.5 Environmental-test requirements . 1110.6 Vibration tests and requirements 1310.7 Shock testing 1410.8 Free

40、fall .1410.9 Resistance to UV .1410.10 Electromagnetic compatibility (EMC) 1510.11 Compass safe distance .1710.12 Insulation resistance 1711 Labelling 1712 Instructions to be included with the owners manual .18BS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014ISO 25197:2012+A1:2014 (E)testINTERNATIONA

41、L STANDARD ISO 25197:2012(E)Small craft Electrical/electronic control systems for steering, shift and throttle1 ScopeThis International Standard establishes the requirements for design, construction and testing of electrical/electronic steering, shift and throttle and dynamic position control system

42、s, or combinations thereof, on small craft of up to 24 m length of hull.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

43、document (including any amendments) applies.ISO 8846, Small craft Electrical devices Protection against ignition of surrounding flammable gases.ISO 8848, Small craft Remote steering systemsISO 10133, Small craft Electrical systems Extra-low-voltage d.c. installationsISO 10240, Small craft Owners man

44、ualISO 10592, Small craft Hydraulic steering systemsISO 11591, Small craft, engine-driven Field of vision from helm positionISO 12215-8, Small craft Hull construction and scantlings Part 8: RuddersISO 13297, Small craft Electrical systems Alternating current installationsISO 16750-2:2010, Road vehic

45、les Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loadsISO 16750-3:2007, Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 3: Mechanical loadsISO 16750-4, Road vehicles Environmental conditions and testin

46、g for electrical and electronic equipment Part 4: Climatic loadsIEC 60068-2-27, Environmental testing Part 2-27: Tests Test Ea and guidance: ShockIEC 60068-2-52, Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution)IEC 60092-507, Electrical installations in shi

47、ps Part 507: Small vesselsIEC 60533:1999, Electrical and electronic installations in ships Electromagnetic compatibilityIEC 60945:2002, Maritime navigation and radiocommunication equipment and systems General requirements Methods of testing and required test resultsIEC 61000-4-5, Electromagnetic com

48、patibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity testIEC 61508 (all parts), Functional safety of electrical/electronic/programmable electronic safety-related systems ISO 2012 All rights reserved 1BS EN ISO 25197:2012BS EN ISO 25197:2012+A1:2014ISO 25197:2012+A1:2014 (E)IN

49、TERNATIONAL STANDARD ISO 25197:2012(E)Small craft Electrical/electronic control systems for steering, shift and throttle1 ScopeThis International Standard establishes the requirements for design, construction and testing of electrical/electronic steering, shift and throttle and dynamic position control systems, or combinations thereof, on small craft of up to 24 m length of hull.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated