EN ISO 25649-1-2017 en Floating leisure articles for use on and in the water - Part 1 Classification materials general requirements and test methods.pdf

1、Floating leisure articles for use on and in the waterPart 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)BS EN ISO 25649-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN

2、ISO 25649-1 October 2017 ICS 97.220.40 Supersedes EN 15649-1:2009+A2:2013English Version Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) Articles de loisirs flottants utiliser sur ou dans leau - Parti

3、e 1: Classification, matriaux, exigences et mthodes dessai gnrales (ISO 25649-1:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 1: Klassifikation, Werkstoffe, allgemeine Anforderungen und Prfverfahren (ISO 25649-1:2017) This European Standard was approved by CEN on 24 June 20

4、17. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

5、on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CEN

6、ELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

7、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cen

8、tre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 25649-1:2017. It is identical to ISO 25649-1:20

9、17. It supersedes BS EN 15649-1:2009+A2:2013, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publicat

10、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88114 5ICS 97.200.50Compliance with a British Standard cannot confer immunity fr

11、om legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 256491:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO

12、 25649-1 October 2017 ICS 97.220.40 Supersedes EN 15649-1:2009+A2:2013English Version Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) Articles de loisirs flottants utiliser sur ou dans leau - Partie 1

13、: Classification, matriaux, exigences et mthodes dessai gnrales (ISO 25649-1:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 1: Klassifikation, Werkstoffe, allgemeine Anforderungen und Prfverfahren (ISO 25649-1:2017) This European Standard was approved by CEN on 24 June 2017.

14、 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on

15、application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELE

16、C Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

17、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre

18、: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-1:2017 EBS EN ISO 256491:2017EN ISO 25649-1:2017 (E) 3 European foreword This document (EN ISO 25649-1:2017) has been prepared by Te

19、chnical Committee ISO/TC 83 “Sports and other recreational facilities and equipment” in collaboration with Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of

20、a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa

21、tent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15649-1:2009+A2:2013. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association According to the CEN-CENELEC

22、 Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

23、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25649-1:2017 has been approved by CEN as EN ISO 25649-1:2017 without any

24、 modification. ISO 25649-1:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 24 Classification and criteria to distinguish floating leisure articles from aquatic toys . 45 General safety requirements and test methods related to all classes 65.1 General . 65

25、.2 Body entrapment 65.2.1 General 65.2.2 Requirements on body entrapment 85.2.3 Test procedure . 85.2.4 Depths of gaps and openings. 85.2.5 Method of measuring . 95.3 Torso entrapment on safety line with regard to children 95.3.1 Requirements . 95.3.2 Test method 95.4 Accessible protruding parts cau

26、sing entanglement . 95.4.1 Requirements . 95.4.2 Test method 95.5 Human subject testing . 105.5.1 General. 105.5.2 Test panel 105.5.3 Assessment panel .115.5.4 Positioning and posture of test subjects for testing floating stability (if applicable) .115.5.5 Basic test postures.115.6 Design working pr

27、essure 125.6.1 Requirements 125.6.2 Test method . 125.7 Load bearing components 125.7.1 Requirements 125.7.2 Test method . 125.8 Towing device . 125.8.1 Requirements 125.8.2 Test method . 125.9 Valves and valve adapters . 125.9.1 Requirements 125.9.2 Test method . 135.9.3 Numbering of air chambers 1

28、35.10 Edges, corners and points 135.10.1 Requirements 135.10.2 Test method . 135.11 Shearing and crushing points 135.11.1 Requirements 135.11.2 Test method . 145.12 Strength of the hull and test conditions . 145.12.1 Requirements 145.12.2 Pressure test .145.12.3 Heat test (not applicable to Class D

29、devices) .155.12.4 Air tightness test for inflatables made from unsupported material.15 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256491:2017ISO 25649-1:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 24 Classification and criteria to disting

30、uish floating leisure articles from aquatic toys . 45 General safety requirements and test methods related to all classes 65.1 General . 65.2 Body entrapment 65.2.1 General 65.2.2 Requirements on body entrapment 85.2.3 Test procedure . 85.2.4 Depths of gaps and openings. 85.2.5 Method of measuring .

31、 95.3 Torso entrapment on safety line with regard to children 95.3.1 Requirements . 95.3.2 Test method 95.4 Accessible protruding parts causing entanglement . 95.4.1 Requirements . 95.4.2 Test method 95.5 Human subject testing . 105.5.1 General. 105.5.2 Test panel 105.5.3 Assessment panel .115.5.4 P

32、ositioning and posture of test subjects for testing floating stability (if applicable) .115.5.5 Basic test postures.115.6 Design working pressure 125.6.1 Requirements 125.6.2 Test method . 125.7 Load bearing components 125.7.1 Requirements 125.7.2 Test method . 125.8 Towing device . 125.8.1 Requirem

33、ents 125.8.2 Test method . 125.9 Valves and valve adapters . 125.9.1 Requirements 125.9.2 Test method . 135.9.3 Numbering of air chambers 135.10 Edges, corners and points 135.10.1 Requirements 135.10.2 Test method . 135.11 Shearing and crushing points 135.11.1 Requirements 135.11.2 Test method . 145

34、.12 Strength of the hull and test conditions . 145.12.1 Requirements 145.12.2 Pressure test .145.12.3 Heat test (not applicable to Class D devices) .155.12.4 Air tightness test for inflatables made from unsupported material.15 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256491:2017ISO 256

35、49-1:2017(E)5.12.5 Air tightness test for inflatables made from reinforced or fabric covered material .165.13 Buckles and other fixings 165.13.1 Requirements 165.13.2 Test methods 166 Material requirements and test methods 166.1 General 166.1.1 Requirements 166.1.2 Test method . 166.2 Chemical requi

36、rements for materials making up the hull, unsupported or reinforced 176.2.1 General. 176.2.2 Resistance to mineral oil 176.2.3 Resistance to chlorinated salt water 176.3 Physical requirements . 176.3.1 Resistance to cold .176.3.2 Resistance to heat 176.4 Mechanical requirements of unsupported hull m

37、aterials 186.4.1 General. 186.4.2 Resistance to puncturing . 186.5 Mechanical requirements for reinforced hull materials 186.5.1 General. 186.5.2 Adhesion of coatings (if applicable) .186.6 Other materials 196.6.1 Wood . 196.6.2 Metal and synthetic material parts .196.7 Threads . 196.7.1 Requirement

38、s 196.7.2 Test method . 197 Durability of warnings and markings 197.1 Resistance to perspiration . 197.1.1 Requirements 197.1.2 Test method . 207.2 Resistance to chlorinated salt water . 207.2.1 Colour fastness .207.2.2 Test liquid 207.2.3 Apparatus 207.2.4 Test method . 207.3 Adhesion of markings 2

39、07.3.1 Requirements 207.3.2 Test method . 207.4 Provision of repair means 20Annex A (normative) Templates 21Annex B (informative) Examples of openings 23Bibliography .29iv ISO 2017 All rights reservedBS EN ISO 256491:2017ISO 25649-1:2017(E)5.12.5 Air tightness test for inflatables made from reinforc

40、ed or fabric covered material .165.13 Buckles and other fixings 165.13.1 Requirements 165.13.2 Test methods 166 Material requirements and test methods 166.1 General 166.1.1 Requirements 166.1.2 Test method . 166.2 Chemical requirements for materials making up the hull, unsupported or reinforced 176.

41、2.1 General. 176.2.2 Resistance to mineral oil 176.2.3 Resistance to chlorinated salt water 176.3 Physical requirements . 176.3.1 Resistance to cold .176.3.2 Resistance to heat 176.4 Mechanical requirements of unsupported hull materials 186.4.1 General. 186.4.2 Resistance to puncturing . 186.5 Mecha

42、nical requirements for reinforced hull materials 186.5.1 General. 186.5.2 Adhesion of coatings (if applicable) .186.6 Other materials 196.6.1 Wood . 196.6.2 Metal and synthetic material parts .196.7 Threads . 196.7.1 Requirements 196.7.2 Test method . 197 Durability of warnings and markings 197.1 Re

43、sistance to perspiration . 197.1.1 Requirements 197.1.2 Test method . 207.2 Resistance to chlorinated salt water . 207.2.1 Colour fastness .207.2.2 Test liquid 207.2.3 Apparatus 207.2.4 Test method . 207.3 Adhesion of markings 207.3.1 Requirements 207.3.2 Test method . 207.4 Provision of repair mean

44、s 20Annex A (normative) Templates 21Annex B (informative) Examples of openings 23Bibliography .29iv ISO 2017 All rights reserved ISO 25649-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of

45、 preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental

46、, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO

47、/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibilit

48、y that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of pate

49、nt declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-1 was prepared by the Europe