EN ISO 25649-3-2017 en Floating leisure articles for use on and in the water - Part 3 Additional specific safety requirements and test methods for Class A devices.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Floating leisure articles for use on and in the waterPart 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017)BS EN ISO 25649-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPIS

2、CHE NORM EN ISO 25649-3 October 2017 ICS 97.220.40 Supersedes EN 15649-3:2009+A1:2012English Version Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017) Articles de loisirs flottants utiliser

3、sur ou dans leau - Partie 3: Exigences de scurit et mthodes dessai complmentaire propre aux dispositifs de Classe A (ISO 25649-3:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 3: Zustzliche besondere sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klasse

4、A (ISO 25649-3:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

5、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res

6、ponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R

7、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP

8、EN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-3:2017 ENational forewordThis British Standard is th

9、e UK implementation of EN ISO 25649-3:2017. It is identical to ISO 25649-3:2017. It supersedes BS EN 15649-3:2009+A1:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represente

10、d on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 881

11、16 9ICS 97.220.40; 97.200.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2017.Amendments/corrigenda issued since publicationDate Text affectedBRIT

12、ISH STANDARDBS EN ISO 25649-3:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25649-3 October 2017 ICS 97.220.40 Supersedes EN 15649-3:2009+A1:2012English Version Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for

13、 Class A devices (ISO 25649-3:2017) Articles de loisirs flottants utiliser sur ou dans leau - Partie 3: Exigences de scurit et mthodes dessai complmentaire propre aux dispositifs de Classe A (ISO 25649-3:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 3: Zustzliche besondere

14、sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klasse A (ISO 25649-3:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s

15、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

16、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr

17、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu

18、rkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

19、 Ref. No. EN ISO 25649-3:2017 EBS EN ISO 25649-3:2017EN ISO 25649-3:2017 (E) 3 European foreword This document (EN ISO 25649-3:2017) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment” in collaboration with Technical Committee CEN/TC 136 “Sport

20、s, playground and other recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standar

21、ds shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15649-3:2009+A1:2012.

22、This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

23、Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sw

24、eden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25649-3:2017 has been approved by CEN as EN ISO 25649-3:2017 without any modification. BS EN ISO 25649-3:2017ISO 25649-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 1

25、4 Safety requirements and test methods . 24.1 General . 24.2 Design, sizing, admissible number of users and maximum load capacity . 34.2.1 General 34.2.2 Sizing 34.2.3 A1-products, space per person and admissible number of users . 34.2.4 A2-products, space per person and admissible number of users .

26、 44.3 In water performance . 54.3.1 Amount of buoyancy and stable floating position 54.3.2 Residual buoyancy of devices claiming floating stability (CASES A, B) 64.3.3 Residual buoyancy of floating leisure articles not claiming floating stability (CASES C, D) . 84.3.4 Capsizing and escape . 94.3.5 G

27、rab handles and safety lines (not applicable to air mattresses) . 94.3.6 Re-embarkation from the water in normal use and failure of one air chamber in CASE A1 104.3.7 Extreme high super structure (wind, drift) .104.3.8 Anchorage . 104.3.9 Giant rings with bottom, strength of entire device .115 Consu

28、mer information 115.1 General 115.2 Consumer information on the packaging (point of sale information) .115.3 Consumer information on the product (information related to safe use) 125.4 Consumer information by instructions for use (separate written information) 125.4.1 General. 125.4.2 Safety and pro

29、duct information . 125.4.3 Assembly (if applicable) . 125.4.4 Maintenance and repair (if applicable) .126 Test report 127 Exclusions .12Annex A (informative) Examples of typical products forming Class A .13Bibliography .15 ISO 2017 All rights reserved iiiContents PageBS EN ISO 25649-3:2017ISO 25649-

30、3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for w

31、hich a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all

32、 matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. Thi

33、s document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or

34、all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users a

35、nd does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to

36、 Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-3 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, in collaboration with ISO Technical Committee TC 83, Sports a

37、nd other recreational facilities and equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all the parts in the ISO 25649-series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 25649-3:2017ISO 25649-3:2017(E)Int

38、roductionAccording to the nature and the intended use of the products dealt with in this document the technical requirements are focused on space per person, floating stability matters and residual buoyancy in case of an emergency.It needs to be taken into account that some of the products provide d

39、ual or multiple use features.Comprehensive consumer information requirements complete the requirement profile of the document and include basic purchase information on whether a product provides floating stability or needs to be balanced by the user.Risk assessment for this document is shown in Tabl

40、e 1. ISO 2017 All rights reserved vBS EN ISO 25649-3:2017ISO 25649-3:2017(E)Table 1 Introductory risk analysisClassTypical productsPlace of usageFunction; range of usage; target/age groupType of movement / propulsionPosition of user regarding equipment and eleva-tion above waterPredictable misusePar

41、tial risk related to water envi-ronmentFinal risk1.1 Pro-tection aims;1.2 Relat-ed stand-ard/reg-ulationA1Floating in-flatable is-lands; recre-ational raft; p l a t f or m/ pontoon, etc.Sea shore, c l o s e t o shore; lakes; smoothly running rivers; pub-lic/ private pools; pondsR e l a x i n g , r e

42、 s t i n g o n t h e w a t e r ; sunbat hing; b a s i s f o r bathing and swimming/ playing; device providing high level of float-ing stability; s i n g l e a n d collective use; all age groups, swimmersS t a t i c u s e within limit-ed area; little action; move-ment by push-ing through swimming str

43、okes only;no mechanical means of pro-pulsionOn or in (side walls) the de-vice, laying, sitting, no di-rect body fit;grab handles might exist but resting does not depend on gripping/balancing;no dangerous height of fallDangerous dis-tance from the bank/ shore; use in cur-rents and/or danger-ous offsh

44、ore winds; use by non-swim-mers; fall over board; no div-ing platform!Unnoticed drifting to open wa-ters; falling asleep and consequent-ly extreme sunburn, etc.; capsizing; skin irritation due to long dura-tion of skin contact/d a n g e r o u s substances in contact with skin; climbing back?; hypo-t

45、hermia; cold shockDROWN-INGFloating stability; minimum buoyancy; residual buoyan-cy; space, safety han-dles/lines; anchorage; warning notes, la-belling, swimmers only, age restric-tion ac-cording to ISO 6185-1, ISO 6185-2 a n d ISO 6185-3A2Large buoy-ant struc-turesSea shore/ c l o s e t o shore, la

46、kes, public/ pri-vate pools; pondsAction, playing in the water; b a l a n c i n g children; col-lec t ive a nd single use; all age groups, swimmersDrifting; pro-pulsion only by swimming strokes or third partyOn the device; loose fit via handles; no d a n g e r o u s heightU s e b y non-swim-mers; us

47、e In current, canal, lack of super-visionDrifting away in open waters due to wind and/or cur-rent; devices provokes use in deep; used by non-swim-mers; falling i n t o d e e p waterLabelling, residual buoyancy, grab han-dles, su-pervision; warningsA1/A2Air mat-tress for use in water; floatable pool

48、loung-ers; float-ing seating structures; giant rings/ tubesS e a shor e close to the shore; lakes, public/ pri-vate pools; ponds seaR e s t i n g o n the water; ob-servation of under water environment; play; mainly s i n g le u s e; floating stabil-ity depends on design;all age groups, swimmersNorma

49、lly no mechanical means of pro-pulsion but possible; drift-ing or propul-sion by swim-ming strokes; seats might be equipped with pedals (wheel propulsion)On/in the de-vice; device is clung on; de-vice is held; mainly a near horizontal posture sit-ting;no relevant el-evation above water levelSee A1/A2 See A1/A2 See A1/A2No rule is known to provide technical substancevi ISO 2017 All rights reservedBS EN ISO 25649-3:2017INTERNATIONAL STANDARD ISO 25649-3:2017(E)Floating leisure articles for use on and in the water Part 3: Additional speci