EN ISO 25649-6-2017 en Floating leisure articles for use on and in the water - Part 6 Additional specific safety requirements and test methods for Class D devices.pdf

1、Floating leisure articles for use on and in the waterPart 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)BS EN ISO 25649-6:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPIS

2、CHE NORM EN ISO 25649-6 October 2017 ICS 97.220.40 Supersedes EN 15649-6:2009+A1:2013English Version Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017) Articles des loisirs flottants utiliser

3、 sur ou dans leau -Partie 6: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe D (ISO 25649-6:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 6: Zustzliche besondere sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klass

4、e D (ISO 25649-6:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and

5、 bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

6、esponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

7、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUR

8、OPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-6:2017 ENational forewordThis British Standard is

9、the UK implementation of EN ISO 25649-6:2017. It is identical to ISO 25649-6:2017. It supersedes BS EN 15649-6:2009+A1:2013, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represen

10、ted on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 8

11、8119 0ICS 97.200.50; 97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRI

12、TISH STANDARDBS EN ISO 256496:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25649-6 October 2017 ICS 97.220.40 Supersedes EN 15649-6:2009+A1:2013English Version Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for

13、 Class D devices (ISO 25649-6:2017) Articles des loisirs flottants utiliser sur ou dans leau -Partie 6: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe D (ISO 25649-6:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 6: Zustzliche besonder

14、e sicherheitstechnische Anforderungen und Prfverfahren fr Artikel der Klasse D (ISO 25649-6:2017) This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

15、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Frenc

16、h, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,

17、Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

18、Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Member

19、s. Ref. No. EN ISO 25649-6:2017 EBS EN ISO 256496:2017EN ISO 25649-6:2017 (E) 3 European foreword This document (EN ISO 25649-6:2017) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment” in collaboration with Technical Committee CEN/TC 136 “Spor

20、ts, playground and other recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standa

21、rds shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15649-6:2009+A1:2013.

22、 This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,

23、 Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, S

24、weden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25649-6:2017 has been approved by CEN as EN ISO 25649-6:2017 without any modification. ISO 25649-6:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety requirements

25、 and test methods . 34.1 General . 34.2 Design of buckles and other fixings 34.2.1 Requirements . 34.2.2 Testing . 34.3 Sizing and admissible number of users, maximum load capacity 34.3.1 General 34.3.2 Space per person per trampoline 44.4 Components . 44.4.1 Valves and stoppers (special requirement

26、s for Class D) . 44.4.2 Testing . 54.5 In water performance . 54.5.1 Class D devices, floating stability . 54.5.2 Floating devices not claiming to provide floating stability . 54.5.3 Buoyancy and amount of residual buoyancy . 54.5.4 Nominative buoyancy for floating leisure articles claiming floating

27、 stability when fully inflated 64.5.5 Carrying handles and climbing facilities . 64.5.6 Re-embarkation from the water . 84.5.7 Anchorage 84.5.8 Water depth 94.5.9 Horizontal safety distance with surrounding area 104.5.10 Visibility 104.5.11 Repair kit . 114.5.12 Springs, protection against corrosion

28、, durability .114.5.13 Safety pad for trampolines and bouncy platforms 114.5.14 Connection of inflatable components .124.5.15 Swimming in close approximation under extra-large floating leisure articles .134.5.16 Testing 135 Instruction manual .136 Exclusion 14Annex A (informative) Examples of typica

29、l products forming Class D .16Bibliography .18 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256496:2017ISO 25649-6:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety requirements and test methods . 34.1 General . 34.2 Design of buckles an

30、d other fixings 34.2.1 Requirements . 34.2.2 Testing . 34.3 Sizing and admissible number of users, maximum load capacity 34.3.1 General 34.3.2 Space per person per trampoline 44.4 Components . 44.4.1 Valves and stoppers (special requirements for Class D) . 44.4.2 Testing . 54.5 In water performance

31、. 54.5.1 Class D devices, floating stability . 54.5.2 Floating devices not claiming to provide floating stability . 54.5.3 Buoyancy and amount of residual buoyancy . 54.5.4 Nominative buoyancy for floating leisure articles claiming floating stability when fully inflated 64.5.5 Carrying handles and c

32、limbing facilities . 64.5.6 Re-embarkation from the water . 84.5.7 Anchorage 84.5.8 Water depth 94.5.9 Horizontal safety distance with surrounding area 104.5.10 Visibility 104.5.11 Repair kit . 114.5.12 Springs, protection against corrosion, durability .114.5.13 Safety pad for trampolines and bouncy

33、 platforms 114.5.14 Connection of inflatable components .124.5.15 Swimming in close approximation under extra-large floating leisure articles .134.5.16 Testing 135 Instruction manual .136 Exclusion 14Annex A (informative) Examples of typical products forming Class D .16Bibliography .18 ISO 2017 All

34、rights reserved iiiContents PageBS EN ISO 256496:2017ISO 25649-6:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO techn

35、ical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely

36、with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria neede

37、d for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ri

38、ghts. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in th

39、is document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World T

40、rade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-6 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment

41、, in collaboration with ISO Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all the parts in the ISO 25649-series can be found on the ISO website.iv ISO 2017

42、All rights reservedBS EN ISO 256496:2017ISO 25649-6:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committe

43、es. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Inte

44、rnational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the dif

45、ferent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO sha

46、ll not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document i

47、s information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organiza

48、tion (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-6 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, in collabor

49、ation with ISO Technical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all the parts in the ISO 25649-series can be found on the ISO website.iv ISO 2017 All rights reserved ISO 25649-6:2017(E)IntroductionThe overriding property of Part-6-products is their enormous size and intended collective use. Therefore, the majority of safety requirements concentrate on floating stability under full and single si