1、BS ENISO25762:2012ICS13.220.40;83.080.01NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAWBRITISHSTANDARDPlasticsGuidanceontheassessmentofthefirecharacteristicsandfireperformanceoffibre-reinforcedpolymercompositesNational forewordThis British Standard is the UK implementation of EN ISO 257
2、62:2012. It is identical to ISO 25762:2009. It supersedes BS ISO 25762:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/21, Testing of plastics.A list of organizations represented on this committee can be obtained on request to its secretary.T
3、his publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 25762:2012This British Standard was published under the authority of th
4、e Standards Policy and Strategy Committee on 31 July 2009 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 29 February 2012 This corrigendum renumbers BS ISO 25762:2009 as BS EN ISO 25762:2012ISBN 978 0 580 75
5、975 8EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25762 January 2012 ICS 13.220.40; 83.080.01 English Version Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) Plastiques - Lignes directrices pou
6、r lvaluation des caractristiques au feu et des performances au feu de composites polymres renforcs de fibres (ISO 25762:2009) Kunststoffe - Anleitung fr die Bewertung der Eigenschaften und des Verhaltens von faserverstrkten Polymerverbundstoffen bei Brandeinwirkung (ISO 25762:2009) This European Sta
7、ndard was approved by CEN on 24 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni
8、ng such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into i
9、ts own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
10、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marn
11、ix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25762:2012: EForeword The text of ISO 25762:2009 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the International Organization for St
12、andardization (ISO) and has been taken over as EN ISO 25762:2012 by Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
13、by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such paten
14、t rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
15、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 25762:2009 has been approved by CEN as a EN ISO 25762:2012 without any modificati
16、on. BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 2012iiReference numberISO 25762:2009(E) ISO 2009INTERNATIONAL STANDARDISO25762First edition2009-07-01Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites Plastiques Lignes direct
17、rices pour lvaluation des caractristiquesau feu et des performances au feu de polymres composites renforcsde fibresPDF disclaimerThisPDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed butshall not be edited unless the typefaces whi
18、ch are embedded are licensed t o and installed on the computer performing the editin g. Indownloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariataccepts no liability in this area.Adobe is a trademark of Adobe Syste ms In
19、corporated.Details ofthe software products used to create thisPDF file can be found in the General Info relative to the file;the PDF-creationparameters were optimized for printing. Every care has been taken to ensure that thefile is suitable for use by ISO member bodies. Inthe unlikely event that a
20、problem relating t o it isfound, please infor m the Central Secretariat at the address given below.COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwisespecified, no part of this publicationmay be reproduced or utilized in any form or by any means,electronic or mechanical, incl
21、uding photocopying and microfilm, without permission in writing from either ISO at t he address be low orISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Publish
22、ed inSwitzerland BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 2012ivContents PageForeword ivIntroduction. v1Scope . 12Normative references. 13Terms, definitions and abbreviated terms. 23.1 General. 23.2 Types of material 34Fibre reinforcement 44.1 Form. 44.2 Fibre content. 44.3 Core materials. 44.
23、4 Production methods. 45Fire characteristics. 55.1 Reaction to fire 55.1.1 General. 55.1.2 Combustibility. 55.1.3 Ignitability 55.1.4 Rate of heat release 55.1.5 Flame spread. 55.1.6 Smoke 65.1.7 Toxicity 65.2 Structural performance 65.2.1 General. 65.2.2 Walls and ceilings. 75.2.3 Floors. 75.2.4 St
24、ructural integrity of fibre-reinforced composites on exposure to fire. 76Fire test methods 86.1 Assessment of fire hazard. 86.2 Fire tests for determining performance requirements 86.3 Applicability of standard fire test methods to FRP composites 86.4 Large-scale tests.96.5 Standard fire tests for c
25、onformity purposes.9Annex A (informative) Heat release measurements on FRP composites. 10Annex B (informative) Typical results given for glass-fibre-reinforced polymer composites by ISOand EN firetest methods . 12Annex C (informative) Recommendations for the handling and storage of fibre-reinforced
26、polymercomposites 20Annex D (informative) Procedure in the event of fire involving fibre-reinforced polymer composites 22Annex E (informative) Mounting and fixing of test specimens of fibre-reinforced polymercomposites 23Bibliography. 27BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 2012 viiForeword
27、 ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a tec hnica
28、l committee has beenestablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closelywith the International Electrotechnical Commission (IEC) on all matters of elect
29、rotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the me
30、mber bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identif
31、ying any or all such patent rights. ISO 25762 was prepared by Technical Committee ISO/TC61, Plastics, Subcommittee SC 4, Burning behaviour. BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 2012viIntroduction The information given in this International Standard is in accordance with the principlesrecom
32、mended inISO 10840 which was established to develop a general policy and philosophy for the development and use offire tests for plastics.Fibre-reinforced polymer (FRP) composites are produced in a wide variety of chemical and physical forms,some of which cause difficulties for fire laboratories sin
33、ce the specimens required for some tests are notrepresentative of the FRP composite in its end-use configuration. This International Standard identifies those tests which can be used fordetermining the fire characteristics of various FRP composites and provides guidance on how to assess the fire per
34、formance of FRP composites indifferent applications. Since FRP composites can be used as lightweight construction materials, theexperience of users in transport applications has been valuable in the preparation of this International Standard. Test data from methods that are specified by regulatorsof
35、 mar ine and rail products havebeenprovided to exemplify the fire performance of some FRP composites. BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 2012 viiINTERNATIONAL STANDA RD 1Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymercompos
36、ites 1 Scope This International Standard gives guidelines for the assessment of the fire characteristics and fire performanceof fibre-reinforced polymer (FRP) composites, particularly in structural applications in buildings and transport. It is applicable to FRP composites prepared from thermosettin
37、g or thermoplastic resins and reinforced withinorganic fibresgreater than 7,5 mm in length. This International Standard gives guidelines on: the applicabilityof product types (e.g. sheets, laminates, profiled sections and some sandwichconstructions) to end-use performance; the test methods and perfo
38、rmance criteria for different physical forms of FRP testspecimen. NOTE 1 FRP composites vary widely in their physical form (e.g. in thickness, density and shape). NOTE 2FRP composites can also be assembled products containingother materials (such as metals or inorganic non-fibrous fillers) and as sy
39、stems containing air-gaps, jointsand fixing attachments. NOTE 3Handling and storage recommendations for the fire safety management of FRP composites are given inAnnex C. In addition, some guidance on how to tackle fires involving FRP composites is provided in Annex D.2 NormativereferencesThe followi
40、ng referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.ISO 472, Plastics VocabularyISO 13943, Fire safety VocabularyBS
41、 EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 20122 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms given in ISO13943 andISO 472 and the following apply. 3.1 General 3.1.1 fibre-reinforced polymer composite polymer matrix comp
42、osite consisting of thermosetting resin or thermoplastic materials and fibres of greaterthan 7,5 mm in length prior to processingNOTE Plastics compositions containing fibres of 7,5 mm or less in length are treated as plastics. 3.1.2 load-bearing capacityRabilityof an element to maintain its structur
43、al stabilitydespite exposure to fire on one or more faces foraperiod of time3.1.3 integrityEabilityof an element with a separating function to withstand fire exposure on one side only without the transmission of fire to the non-fire side as a result of the passage of significant quantities of flames
44、 or hot gases from the fire to the non-fire side thereby causing ignition either of the unexposed surface or of anymaterial adjacent to that surface NOTE This may include the ability of an element to withstand delamination (the layers of the material separating fromeach other) when under load and ex
45、posed to fire. 3.1.4 insulating capacityIabilityof an element to withstand fire exposure on one side only without significant transfer of heat from the exposed to the unexposed side 3.1.5 product material, composite or assembly about which information is required 3.1.6 composite structured combinati
46、on of two or more discrete materials,with one of the materials (the matrix) forming acontinuous phase NOTE 1 The structure of a composite can be made up of one or more layers. NOTE 2For the purposes of this International Standard, at least one of the materials is a plastic or an organic-basedpolymer
47、. 3.1.7 ARHE( t n )average rate of heat emission at time tintegrated heat emission from time 0 to time t , divided by tNOTE It is expressed in kW/m2 for cone calorimeter results (see ISO 5660-1). BS EN ISO 25762:2012 EN ISO 25762:2012 (E) ISO 201233.1.8 MARHEmaximum average rate of heat emissionmaxi
48、mum value of ARHE from t = 0 to t = t endNOTE It is usually expressed in kW/m2 . 3.1.9 FIGRA indexfire growth rate indexmaximum value of the quotient of the rate of heat release from the specimen and the length of time it occursNOTE It is usually expressed in W/s. Further details concerning its deri
49、vation are given in EN 13823. 3.1.10SMOGRA indexsmoke growth rate indexmaximum value of the quotient of the rate of smoke production bythe specimen and the length of timeit occurs NOTE It is usually expressed in m 2 /s2 . Further details concerning its derivation are given in EN 13823. 3.1.11resistance to radiationWabilityof a product/construction element to withstand fire exposure on one side only, thus reducing theprobability of the transmission of fire as a result of significant radiated heat either passing through the product/element to
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1