EN ISO 28765-2011 3125 Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges《六角头螺栓 公制.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 28765:2011Vitreous and porcelain enamels Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:

2、2008)Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28765:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 28765:2011. It

3、 is identical to ISO 28765:2008. It supersedes BS EN 15282:2007, which is withdrawn.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e S T I / 3 6 , V i t r e o u s e n a m e l c o a t i n g s .A list of organizations represented on this committee can be obt

4、ained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 72288 2 ICS 25.220.50 Compliance with a British Standard cannot confer immunityfrom legal obligations.

5、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2011.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction

6、or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 28765 March 2011 ICS 25.220.50 Supersedes EN 15282:2007English Version Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or ind

7、ustrial effluents and sludges (ISO 28765:2008) maux vitrifis - Conception de rservoirs en acier boulonns pour le stockage ou le traitement des eaux ou des effluents deaux uses urbains ou industriels (ISO 28765:2008) Emails und Emaillierungen - Gestaltung von verschraubten Stahlbehltern fr die Speich

8、erung oder Behandlung von Wasser oder kommunalen und industriellen Abwssern und Abwasserschlamm (ISO 28765:2008) This European Standard was approved by CEN on 3 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe

9、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions

10、(English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belg

11、ium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMM

12、ITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 28765:2011: ECopyright European C

13、ommittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28765:2011 EN ISO 28765:2011 (E) 3 Foreword The text of ISO 28765:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and oth

14、er inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 28765:2011 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of which is held by BSI. This European Standard shall be given the status of a nat

15、ional standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of

16、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15282:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

17、ean Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and th

18、e United Kingdom. Endorsement notice The text of ISO 28765:2008 has been approved by CEN as a EN ISO 28765:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from

19、IHS-,-,-BS EN ISO 28765:2011ISO 28765:2008(E) ISO 2008 All rights reserved iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 2 3 Terms and definitions. 3 4 Symbols and abbreviated terms . 5 5 Units . 6 6 Information and requirements to be agreed and documented 6 6.1 General. 6 6.2 In

20、formation to be provided by the purchaser 6 6.3 Information to be provided by the designer 7 7 Applicable standards 7 8 Loads 8 8.1 General. 8 8.2 Contents 8 8.3 Tank structure . 9 8.4 Roof 9 8.5 Equipment loads . 10 8.6 Access . 10 8.7 Environmental . 10 8.8 Ancillary items 11 9 Design 11 9.1 Gener

21、al. 11 9.2 Steel 11 9.3 Tank 12 9.4 Openings . 17 9.5 Effects of accidents 18 10 Vitreous-enamel coating 19 10.1 Vitreous enamel 19 10.2 Coating. 19 10.3 Vitreous-enamel quality . 19 10.4 Protection during shipping 25 10.5 Maintenance 25 11 Installation . 25 11.1 General guidance 25 11.2 Foundations

22、 25 11.3 Inspection of the vitreous-enamel coating at the construction site 25 12 Disinfection . 25 Bibliography . 26 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28

23、765:2011ISO 28765:2008(E) iv ISO 2008 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committee

24、s. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Inter

25、national Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International St

26、andards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the sub

27、ject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 28765 was prepared by the European Committee for Standardization (CEN) (as EN 15282) and was adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 107, Metallic and ot

28、her inorganic coatings, in parallel with its approval by the ISO member bodies. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28765:2011INTERNATIONAL STANDARD ISO 287

29、65:2008(E) ISO 2008 All rights reserved 1Vitreous and porcelain enamels Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges 1 Scope This International Standard establishes the requirements for the design and use of vitreous-enamel-coate

30、d bolted cylindrical steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges. It applies to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation. It applies where a) the tank is cylindrical a

31、nd is mounted on a load-bearing base substantially at or above ground level; b) the product of the tank diameter in metres and the wall height in metres lies within the range 5 to 500; c) the tank diameter does not exceed 100 m and the total wall height does not exceed 50 m; d) the stored material h

32、as the characteristics of a liquid, exerting a negligible frictional force on the tank wall; the stored material may be undergoing treatment as part of a municipal or industrial effluent treatment process; e) the internal pressure in the headspace above the liquid does not exceed 50 kPa and the inte

33、rnal partial vacuum above the liquid does not exceed 10 kPa; f) the walls of the tank are vertical; g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank may have a rise or fall built in to allow complete emptying of the tank contents, the slope of w

34、hich does not exceed 1:100; h) there is negligible inertial and impact load due to tank filling; i) the minimum thickness of the tank shell is 1,5 mm; j) the material used for the manufacture of the steel sheets is carbon steel (tanks constructed of sheets made from aluminium or stainless steel are

35、outside the scope of this International Standard); k) the temperature of the tank wall during operation is within the range 50 C to +100 C under all operating conditions. This International Standard also gives details of procedures to be followed during installation on site and for inspection and ma

36、intenance of the installed tank. It does not apply to chemical-reaction vessels. It does not apply to tanks fitted with floating roofs. It does not cover resistance to fire. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networ

37、king permitted without license from IHS-,-,-BS EN ISO 28765:2011ISO 28765:2008(E) 2 ISO 2008 All rights reserved2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referenc

38、es, the latest edition of the referenced document (including any amendments) applies. ISO 2178, Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method ISO 2747, Vitreous and porcelain enamels Enamelled cooking utensils Determination of resistance to thermal sho

39、ck ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 4532, Vitreous and porcelain enamels Determination of the resistance of enamelled articles to impact Pistol test ISO 6370-2, Vitreous and p

40、orcelain enamels Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion ISO 8289:2000, Vitreous and porcelain enamels Low voltage test for detecting and locating defects ISO 15686-1, Buildings and constructed assets Service life planning Part 1: General principle

41、s ISO 28706-1:2008, Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 1: Determination of resistance to chemical corrosion by acids at room temperature ISO 28706-2:2008, Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 2: Deter

42、mination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours ISO 28706-3:2008, Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagon

43、al vessel ISO 28706-4:2008, Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel EN 101, Ceramic tiles Determination of scratch hardness of surface according to Mohs E

44、N 1993-1-6, Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures EN 1993-4-1, Eurocode 3 Design of steel structures Part 4-1: Silos EN 1993-4-2, Eurocode 3 Design of steel structures Part 4-2: Tanks EN 1998-4, Eurocode 8 Design of structures for earthquake resis

45、tance Part 4: Silos, tanks and pipelines EN 10209:1996, Cold rolled low carbon steel flat products for vitreous enamelling Technical delivery conditions EN 14430:2004, Vitreous and porcelain enamels High voltage test ANSI/AWWA D 103-97, Factory-Coated Bolted Steel Tanks for Water Storage Copyright E

46、uropean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 28765:2011ISO 28765:2008(E) ISO 2008 All rights reserved 33 Terms and definitions For the purposes of this document, the following

47、terms and definitions apply. 3.1 brief working document which specifies at any point in time the relevant needs and aims of the project, the resources to be provided by the client, the details of the project and any applicable design requirements within which all subsequent briefing (when needed) an

48、d designing can take place 3.2 client person or organization that requires a tank to be provided, altered or extended and is responsible for initiating and approving the brief 3.3 defect break in the surface of the vitreous enamel 3.4 designer person or organization responsible for stating the shape and specification of the component to be designed 3.5 design life service life intended by the designer 3.6 discontinuity defect area or spot that allows an electric current to pass when tested with low-voltage or high-voltage test apparatus 3.7 ena