EN ISO 52022-1-2017 en Energy performance of buildings - Thermal solar and daylight properties of building components and elements - Part 1 Simplified calculation method of the sol.pdf

1、Energy performance of buildings Thermal, solar and daylight properties of building components and elementsPart 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazingBS EN ISO 520221:2017BSI Standards PublicationWB11885_BSI_Standa

2、rdCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52022-1 July 2017 ICS 91.120.10 Supersedes EN 13363-1:2003+A1:2007English Version Energy performance of buildings - Thermal, solar and daylight properties of building components and elements -Part 1: Simpl

3、ified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017) Performance nergtique des btiments - Proprits thermiques, solaires et lumineuses des composants et lments du btiment - Partie 1: Mthode de calcul simplifie des car

4、actristiques solaires et lumineuses pour les dispositifs de protection solaire combins des vitrages (ISO 52022-1:2017) Energieeffizienz von Gebuden - Wrmetechnische, solare und tageslichtbezogene Eigenschaften von Bauteilen und Bauelementen - Teil 1: Vereinfachtes Berechnungsverfahren zur Ermittlung

5、 der solaren und tageslichtbezogenen Eigenschaften von Sonnenschutz in Kombination mit Verglasungen (ISO 52022-1:2017)This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving th

6、is European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official

7、versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Aust

8、ria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spai

9、n, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide

10、 for CEN national Members. Ref. No. EN ISO 52022-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 520221:2017. It supersedes BS EN 133631:2003+A1:2007, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building p

11、erformance Moisture.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Pub

12、lished by BSI Standards Limited 2017ISBN 978 0 580 87977 7ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issue

13、d since publicationDate Text affectedBRITISH STANDARDBS EN ISO 520221:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52022-1 July 2017 ICS 91.120.10 Supersedes EN 13363-1:2003+A1:2007English Version Energy performance of buildings - Thermal, solar and daylight properties of building co

14、mponents and elements -Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017) Performance nergtique des btiments - Proprits thermiques, solaires et lumineuses des composants et lments du btiment - Partie 1

15、: Mthode de calcul simplifie des caractristiques solaires et lumineuses pour les dispositifs de protection solaire combins des vitrages (ISO 52022-1:2017) Energieeffizienz von Gebuden - Wrmetechnische, solare und tageslichtbezogene Eigenschaften von Bauteilen und Bauelementen - Teil 1: Vereinfachtes

16、 Berechnungsverfahren zur Ermittlung der solaren und tageslichtbezogenen Eigenschaften von Sonnenschutz in Kombination mit Verglasungen (ISO 52022-1:2017)This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which st

17、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europea

18、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are t

19、he national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman

20、ia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form

21、 and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52022-1:2017 EBS EN ISO 520221:2017EN ISO 52022-1:2017 (E) 2 European foreword This document (EN ISO 52022-1:2017) has been prepared by Technical Committee CEN/TC 89 “Thermal performance of buildings and building componen

22、ts” the secretariat of which is held by SIS, in collaboration with Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t

23、he latest by January 2018, and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such pate

24、nt rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to C

25、EN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF1 below), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional lega

26、l requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certi

27、fication scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. References: EF1 Mandate M480, Mandate to CEN

28、, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010

29、/31/EU) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14thDecember 2010 This document supersedes EN 13363-1:2003+A1:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countrie

30、s are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland

31、, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 520221:2017EN ISO 52022-1:2017 (E) 3 Endorsement notice The text of ISO 52022-1:2017 has been approved by CEN as EN ISO 52022-1:2017 without any modification. BS EN ISO 520221:2017Th

32、is page deliberately left blank ISO 52022-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 23 Terms and definitions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscripts 35 Description of the methods . 35.1 Outputs 35.2 General description . 46 Calculation method 46.1 Outpu

33、t data 46.2 Calculation time intervals 46.3 Input data 46.3.1 Glazing 46.3.2 Solar protection devices 56.4 Calculation procedure . 66.4.1 Applicable time interval 66.4.2 Total solar energy transmittance . 66.4.3 Total light transmittance 106.4.4 Total solar direct transmittance 107 Report .117.1 Con

34、tents of report . 117.2 Drawing 117.3 Values used in the calculation . 117.4 Presentation of results 11Annex A (normative) Input and method selection data sheet Template 12Annex B (informative) Input and method selection data sheet Default choices 14Annex C (normative) Regional references in line wi

35、th ISO Global Relevance Policy 16Bibliography .17 ISO 2017 All rights reserved iiiContents PageISO 52022-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 23 Terms and definitions . 24 Symbols and subscripts . 34.1 Symbols . 34.2 Subscripts 35 Description of the methods . 35.1 Outp

36、uts 35.2 General description . 46 Calculation method 46.1 Output data 46.2 Calculation time intervals 46.3 Input data 46.3.1 Glazing 46.3.2 Solar protection devices 56.4 Calculation procedure . 66.4.1 Applicable time interval 66.4.2 Total solar energy transmittance . 66.4.3 Total light transmittance

37、 106.4.4 Total solar direct transmittance 107 Report .117.1 Contents of report . 117.2 Drawing 117.3 Values used in the calculation . 117.4 Presentation of results 11Annex A (normative) Input and method selection data sheet Template 12Annex B (informative) Input and method selection data sheet Defau

38、lt choices 14Annex C (normative) Regional references in line with ISO Global Relevance Policy 16Bibliography .17 ISO 2017 All rights reserved iiiContents PageBS EN ISO 520221:2017ISO 52022-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national

39、 standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internationa

40、l organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended fo

41、r its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso

42、.org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will

43、 be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meani

44、ng of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 52022-1 was prepared by the E

45、uropean Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in collaboration with ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in accor

46、dance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all parts in the ISO 52022 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 520221:2017ISO 52022-1:2017(E)ForewordISO (the International Organization for Standardization)

47、 is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repre

48、sented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to devel

49、op this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible f