EN ISO ASTM 52915-2017 en Specification for additive manufacturing file format (AMF) Version 1 2《添加剂制造文件格式规范(AMF)版本1 2(ISO和ASTM 52915 2016)》.pdf

1、Specification for additivemanufacturing file format(AMF) Version 1.2BS EN ISO/ASTM 52915:2017(ISO/ASTM 52915:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO/ASTM 52915:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

2、 of EN ISO/ASTM 52915:2017. It is identical to ISO/ASTM 52915:2016. It supersedes BS ISO/ASTM 52915:2016 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AMT/8, Additive manufacturing.A list of organizations represented on this subcommittee can be obtai

3、ned on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 94649 3ICS 25.030; 25.040.20; 35.2

4、40.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affected31 March 2017 This corrigen

5、dum renumbers BS ISO/ASTM 52915:2016 as BS EN ISO/ASTM 52915:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/ASTM 52915 February 2017 ICS 25.030; 35.240.50 English Version Specification for additive manufacturing file format (AMF) Version 1.2 (ISO/ASTM 52915:2016) Spcification normalise

6、 pour le format de fichier pour la fabrication additive (AMF) Version 1.2 (ISO/ASTM 52915:2016) Spezifikation fr ein Dateiformat fr Additive Fertigung (AMF) Version 1.2 (ISO/ASTM 52915:2016)This European Standard was approved by CEN on 17 January 2017. CEN members are bound to comply with the CEN/CE

7、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

8、 or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the o

9、fficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

10、ds, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All

11、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO/ASTM 52915:2017 EBS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)ForewordivIntroductionv1 Scope.12 Terms and definitions.13 Key considerations.23.1 General. 23.2 Guidelines for the inclusion

12、 of future new elements. 34 Structure of this specification.35 General structure.46 Geometry specification56.1 General. 56.2 Smooth geometry . 66.3 Restrictions on geometry. 77 Material specification77.1 General. 77.2 Mixed and graded materials and substructures. 97.3 Porous materials 97.4 Stochasti

13、c materials. 108 Colour specification108.1 General 108.2 Colour gradations and texture mapping 118.3 Transparency. 129 Texture specification.1210 Constellations.1211 Metadata1312 Compression and distribution1313 Minimal implementation14AnnexA (informative) AMF XML schema implementation guide15AnnexB

14、 (informative) Performance data and future features 23Bibliography.26 ISO/ASTM International 2016 All rights reserved iiiContents Page3European foreword The text of ISO/ASTM 52915:2016 has been prepared by Technical Committee ISO/TC 261 “Additive manufacturing” of the International Organization for

15、Standardization (ISO) and has been taken over as EN ISO/ASTM 52915:2017 by Technical Committee CEN/TC 438 “Additive Manufacturing” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endo

16、rsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identi

17、fying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugosl

18、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/ASTM 52

19、915:2016 has been approved by CEN as EN ISO/ASTM 52915:2017 without any modification. BS EN ISO/ASTM 52915:2017EN ISO/ASTM 52915:2017 (E)BS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)Foreword ivIntroduction v1 Scope .12 Terms and definitions .13 Key considerations .23.1 General . 23.2 Guidelines for t

20、he inclusion of future new elements . 34 Structure of this specification .35 General structure .46 Geometry specification 56.1 General . 56.2 Smooth geometry . 66.3 Restrictions on geometry . 77 Material specification 77.1 General . 77.2 Mixed and graded materials and substructures . 97.3 Porous mat

21、erials 97.4 Stochastic materials . 108 Colour specification108.1 General 108.2 Colour gradations and texture mapping 118.3 Transparency . 129 Texture specification .1210 Constellations .1211 Metadata 1312 Compression and distribution 1313 Minimal implementation 14Annex A (informative) AMF XML schema

22、 implementation guide 15Annex B (informative) Performance data and future features 23Bibliography .26 ISO/ASTM International 2016 All rights reserved iiiContents PageBS EN ISO/ASTM 52915:2017ISO/ASTM 52915:2016(E)BS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)ForewordISO (the International Organization

23、 for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has

24、the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The pro

25、cedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editor

26、ial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights

27、 identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explana

28、tion on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this documen

29、t is ISO/TC 261, Additive manufacturing, in cooperation with ASTM F 42.91, Terminology, on the basis of a partnership agreement between ISO and ASTM International with the aim to create a common set of ISO/ASTM standards on Additive Manufacturing.This second edition cancels and replaces the first ed

30、ition (ISO/ASTM 52915:2013), which has been technically revised. This revision contains changes to normative language and details of a minimum implementation, as well as corrections and clarifications.iv ISO/ASTM International 2016 All rights reservedBS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)Intro

31、ductionThis International Standard describes an interchange format to address the current and future needs of additive manufacturing technology. For the last three decades, the stereolithography (STL) file format has been the industry standard for transferring information between design programs and

32、 additive manufacturing equipment. An STL file defines only a surface mesh and has no provisions for representing colour, texture, material, substructure and other properties of the fabricated object. As additive manufacturing technology is evolving quickly from producing primarily single-material,

33、homogeneous objects to producing geometries in full colour with functionally-defined gradations of materials and microstructures, there is a growing need for a standard interchange file format that can support these features.The Additive Manufacturing File Format (AMF) has many benefits. It describe

34、s an object in such a general way that any machine can build it to the best of its ability, and as such is technology independent. It is easy to implement and understand, scalable and has good performance. Crucially, it is both backwards compatible, allowing any existing STL file to be converted, an

35、d future compatible, allowing new features to be added as advances in technology warrant. ISO/ASTM International 2016 All rights reserved vBS EN ISO/ASTM 52915:2017ISO/ASTM 52915:2016(E)BS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)ForewordISO (the International Organization for Standardization) is a

36、worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

37、 on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop thi

38、s document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Di

39、rectives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the deve

40、lopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO

41、specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 261, Additive m

42、anufacturing, in cooperation with ASTM F 42.91, Terminology, on the basis of a partnership agreement between ISO and ASTM International with the aim to create a common set of ISO/ASTM standards on Additive Manufacturing.This second edition cancels and replaces the first edition (ISO/ASTM 52915:2013)

43、, which has been technically revised. This revision contains changes to normative language and details of a minimum implementation, as well as corrections and clarifications.iv ISO/ASTM International 2016 All rights reservedBS ISO/ASTM 52915:2016ISO/ASTM 52915:2016(E)IntroductionThis International S

44、tandard describes an interchange format to address the current and future needs of additive manufacturing technology. For the last three decades, the stereolithography (STL) file format has been the industry standard for transferring information between design programs and additive manufacturing equ

45、ipment. An STL file defines only a surface mesh and has no provisions for representing colour, texture, material, substructure and other properties of the fabricated object. As additive manufacturing technology is evolving quickly from producing primarily single-material, homogeneous objects to prod

46、ucing geometries in full colour with functionally-defined gradations of materials and microstructures, there is a growing need for a standard interchange file format that can support these features.The Additive Manufacturing File Format (AMF) has many benefits. It describes an object in such a gener

47、al way that any machine can build it to the best of its ability, and as such is technology independent. It is easy to implement and understand, scalable and has good performance. Crucially, it is both backwards compatible, allowing any existing STL file to be converted, and future compatible, allowi

48、ng new features to be added as advances in technology warrant. ISO/ASTM International 2016 All rights reserved vBS EN ISO/ASTM 52915:2017ISO/ASTM 52915:2016(E)BS ISO/ASTM 52915:2016 BS ISO/ASTM 52915:2016Specification for Additive Manufacturing File Format (AMF) Version 1.21 ScopeThis International

49、Standard provides the specification for the Additive Manufacturing File Format (AMF), an interchange format to address the current and future needs of additive manufacturing technology. The AMF may be prepared, displayed and transmitted provided the requirements of this specification are met. When prepared in a structured electronic format, strict adherence to an extensible markup language (XML)1schema is required to support standards-compliant interoperability.A W3C XML schema definition (XSD) for the AMF is available from ISO from http:/standards.iso