EN ISO IEC 15426-2-2006 en Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 Two-dimensional symb.pdf

1、BRITISH STANDARDBS EN ISO/IEC 15426-2:2006Incorporating April 2008corrigendumInformation technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbolsICS 35.040g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g4

2、4g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the official English language version of EN ISO/IEC 15426-2:2006. It is identical with ISO/IEC 15426-2:2005, incorporati

3、ng corrigendum April 2008.The UK participation in its preparation was entrusted to Technical Committee IST/34, Automatic identification and data capture techniques.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to i

4、nclude all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN ISO/IEC 15426-2:2006Amendments/corrigenda issued since publicationAmd. No. Date Comments 16259 31 July 2006 Renu

5、mbered BS ISO/IEC 15426-2:2005 as BS EN ISO/IEC 15426-2:200631 July 2011 Implementation of ISO IEC corrigendum April 2008: Modification of Table A.2 and Figure A.3This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 April 2005 BSI 2011ISBN 978

6、0 580 76035 8EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO/IEC 15426-2March 2006ICS 35.040English VersionInformation technology - Automatic identification and datacapture techniques - Bar code verifier conformance specification- Part 2: Two-dimensional symbols (ISO/IEC 15426-2:2005)Technolog

7、ies de linformation - Techniques didentificationautomatique et de capture de donnes - Spcifications deconformit des vrificateurs de codes barres - Partie 2:Symboles bidimensionnels (ISO/IEC 15426-2:2005)Informationstechnik - Automatische Identifikation undDatenerfassungsverfahren - Prfanforderungen

8、frStrichcoderfgerte - Teil 2: Prfgerte frzweidimensionale Codes (ISO/IEC 15426-2:2005)This European Standard was approved by CEN on 16 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of

9、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version

10、in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Fin

11、land, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMIT

12、EE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO/IEC 15426-2:2006: EForeword The text of ISO/IEC 15426-2:2005 has been prepared by Technical Committee ISO/IE

13、C/JTC 1 “Information technology” of the International Organization for Standardization (ISO) and has been taken over as EN ISO/IEC 15426-2:2006 by Technical Committee CEN/TC 225 “AIDC technologies“, the secretariat of which is held by NEN. This European Standard shall be given the status of a nation

14、al standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

15、countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw

16、eden, Switzerland and United Kingdom. Endorsement notice The text of ISO/IEC 15426-2:2005 has been approved by CEN as EN ISO/IEC 15426-2:2006 without any modifications. BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)Reference numberISO/IEC 15426-2:2005(E)INTERNATIONAL STANDARD ISO/IEC15426-2Fi

17、rst edition2005-03-15Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols Technologies de linformation Techniques didentification automatique et de capture de donnes Spcifications de conformit des vrif

18、icateurs de codes barres Partie 2: Symboles bidimensionnels BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)ii iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Conformance . 1 3 Normative references . 2 4 Terms and definitions. 2 5 Symbols . 2 6 Functional requirements 2 6.1 General requ

19、irements . 2 6.2 Reflectance calibration. 3 6.3 Mandatory functions. 3 6.3.1 Verifiers for multi-row bar code symbols. 3 6.3.2 Verifiers for two-dimensional matrix symbols. 3 6.4 Optional functions 4 7 General constructional and operational requirements . 4 7.1 Installation, operation and maintenanc

20、e 4 7.2 Power supply. 4 7.3 Temperature 4 7.3.1 Operating temperature range. 4 7.3.2 Storage temperature range 4 7.4 Humidity. 4 7.5 Ambient light immunity 5 8 Test requirements . 5 8.1 Test methods. 5 8.1.1 Selection of equipment for testing 5 8.1.2 Scanning parameters 5 8.1.3 Test measurements 5 8

21、.2 Test environment 5 8.3 Primary reference test symbols 5 8.4 Test report 6 9 Certification and labelling 7 10 Equipment specification. 7 Annex A (normative) Primary reference test symbols . 8 Annex B (normative) Verification requirements for primary reference test symbols . 13 BS EN ISO/IEC 15426-

22、2:2006EN ISO/IEC 15426-2:2006 (E)iv Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of In

23、ternational Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liai

24、son with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint tech

25、nical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is

26、drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15426-2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommit

27、tee SC 31, Automatic identification and data capture techniques. ISO/IEC 15426 consists of the following parts, under the general title Information technology Automatic identification and data capture techniques Bar code verifier conformance specification: Part 1: Linear symbols Part 2: Two-dimensio

28、nal symbols BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)vIntroduction The technology of bar coding is based on the recognition of patterns encoded, in bars and spaces or in a matrix of modules of defined dimensions, according to rules defining the translation of characters into such pattern

29、s, known as the symbology specification. Symbology specifications may be categorised into linear symbols, on the one hand, and two-dimensional symbols on the other; the latter may in turn be sub-divided into multi-row bar codes sometimes referred to as stacked bar codes, and two-dimensional matrix c

30、odes. Multi-row bar codes are constructed graphically as a series of rows of symbol characters, representing data and overhead components, placed in a defined vertical arrangement to form a (normally) rectangular symbol, which contains a single data message. Each row of the symbol has the characteri

31、stics of a linear bar code symbol and may be read by linear symbol scanning techniques. Two-dimensional matrix symbols are usually rectangular arrangements of modules placed at the intersections of a grid of two (sometimes more) axes; the coordinates of each module need to be known in order to deter

32、mine its significance, and the symbol must therefore be analysed two-dimensionally before it can be decoded. Unless the context requires otherwise, the term symbol in this part of ISO/IEC 15426 may refer to either type of symbology. The symbol, as a machine-readable data carrier, must be produced in

33、 such a way as to be reliably decoded at the point of use, if it is to fulfil its basic objective. Standard methodologies have been developed for measuring and assessing the quality of symbols for process control and quality assurance purposes during symbol production as well as afterwards. Manufact

34、urers of bar code equipment, the producers of bar code symbols and the users of bar code technology require publicly available standard conformance specifications for measuring equipment applying these methodologies, to ensure the accuracy and consistency of performance of this equipment. This part

35、of ISO/IEC 15426 is intended to be similar in technical content (mutatis mutandis) to the linear bar code verifier conformance standard, ISO/IEC 15426-1, on which it has been based. It should be read in conjunction with the symbology specification applicable to the bar code symbol being tested, whic

36、h provides symbology-specific detail necessary for its application. BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)blank1Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols 1 Scope This part of

37、ISO/IEC 15426 defines test methods and minimum accuracy criteria applicable to verifiers using the methodologies of ISO/IEC 15415 for multi-row bar code symbols and two-dimensional matrix symbologies, and specifies reference calibration standards against which these should be tested. This part of IS

38、O/IEC 15426 provides for testing of representative samples of the equipment. NOTE ISO/IEC 15426-1 applies to verifiers for linear bar code symbols. 2 Conformance The instrument shall be considered to conform with this part of ISO/IEC 15426 if it performs the functions defined in 6.3 and if the resul

39、ts of measurements of primary reference test symbols carried out in accordance with Clause 8 demonstrate that the arithmetic means of the ten measurements (for multi-row bar code symbols) or five measurements (for two-dimensional matrix symbols) of individual reported parameters are within the toler

40、ances shown in Table 1 below. Table 1 Tolerances for measured parameter values Parameter Symbology type Tolerance Rmaxand/or RsBoth 5 % reflectance Rminand/or RbBoth 3 % reflectance UEC Both 0,0 Decodability Multi-row 0,08 Defects Multi-row 0,08 Codeword Yield Multi-row 0,08 Grid Nonuniformity Matri

41、x 0,06 Modulation Matrix 0,08 of the value measured for the reduced dark widow on a calibrated test symbol card Fixed Pattern Damage Matrix Within calibrated grade boundaries NOTE The tolerances in Table 1 are additional to any tolerances stated by the supplier of the primary reference test symbols.

42、 BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)2 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (inclu

43、ding any amendments) applies. ISO 2859-1:1999, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 9001:2000, Quality management systems Requirements ISO/IEC 15415, Information technology Automatic identifi

44、cation and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416, Information technology Automatic identification and data capture techniques Bar code print quality test specification Linear symbols ISO/IEC 15438, Information technology Automatic ide

45、ntification and data capture techniques Bar code symbology specifications PDF417 ISO/IEC 16022, Information technology International symbology specification Data Matrix ISO/IEC 19762 (all parts), Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary

46、 ISO/IEC 18004, Information technology Automatic identification and data capture techniques Bar code symbology QR Code 4 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 15415, ISO/IEC 19762 (all parts) and the following apply. 4.1 primary reference

47、 test symbol bar code symbol intended for the testing of the accuracy of bar code verifiers and manufactured to close tolerances, of at least ten times the precision listed in Table 1, by methods traceable to national standards 5 Symbols RbBar Reflectance, as defined in ISO/IEC 15416 RmaxMaximum ref

48、lectance, as defined in ISO/IEC 15416 RminMinimum reflectance, as defined in ISO/IEC 15416 RsSpace Reflectance, as defined in ISO/IEC 15416 6 Functional requirements 6.1 General requirements The general requirement of a two-dimensional symbol verifier is that it shall provide assessments of the qual

49、ity of a bar code symbol which are accurate and consistent, both in relation to measurements of a specific BS EN ISO/IEC 15426-2:2006EN ISO/IEC 15426-2:2006 (E)3symbol made with the same instrument over a period of time and in relation to measurements of a specific symbol made by different instruments. Such consistency is essential to enable valid comparisons to be made of assessments of a symbol verified at two different times or on two different instruments. 6.2 Reflec