EN ISO TR 20882-2007 en Footwear - Performance requirements for components for footwear - Lining and insocks《鞋类 鞋类组件的性能要求 衬里和内垫》.pdf

1、PUBLISHED DOCUMENTPD CEN ISO/TR 20882:2007Footwear Performance requirements for components for footwear Lining and insocksICS 61.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50

2、g51g60g53g44g42g43g55g3g47g36g58PD CEN ISO/TR 20882:2007This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 March 2007 BSI 2007ISBN 978 0 580 50449 5National forewordThis Published Document was published by BSI. It is the UK implementation o

3、f CEN ISO/TR 20882:2007.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented on TCI/69 can be obtained on request to its secretary.This publication does not purport to include all the necessary p

4、rovisions of a contract. Users are responsible for its correct application. Amendments issued since publicationAmd. No. Date CommentsTECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN ISO/TR 20882February 2007ICS 61.060English VersionFootwear - Performance requirements for components forfootwea

5、r - Lining and insocks (ISO/TR 20882:2007)Chaussures - Exigences de performance pour lescomposants des chaussures - Doublures et premires depropret (ISO/TR 20882:2007)Schuhe - Anforderungen an das Gebrauchsverhalten vonSchuhbestandteilen - Futter und Einlegesohlen (ISO/TR20882:2007)This Technical Re

6、port was approved by CEN on 21 August 2006. It has been drawn up by the Technical Committee CEN/TC 309.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

7、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CE

8、N All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN ISO/TR 20882:2007: EForeword This document (CEN ISO/TR 20882:2007) has been prepared by Technical Committee CEN/TC 309 “Footwear“, the secretariat of which is held by AENOR, in collabora

9、tion with Technical Committee ISO/TC 216 “Footwear“. CEN ISO/TR 20882:2007Reference numberISO/TR 20882:2007(E)TECHNICAL REPORT ISO/TR20882First edition2007-02-15Footwear Performance requirements for components for footwear Lining and insocks Chaussures Exigences de performance pour les composants de

10、s chaussures Doublures et premires de propret CEN ISO/TR 20882:2007ii iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Requirements 2 4.1 General. 2 4.2 Performance requirements for lining and insock components for general purpose sports footwear . 2 4

11、.3 Performance requirements for lining and insocks components for school footwear 4 4.4 Performance requirements for lining and insocks components for casual footwear. 6 4.5 Performance requirements for lining and insocks components for mens town footwear 8 4.6 Performance requirements for lining an

12、d insocks components for cold weather footwear 10 4.7 Performance requirements for lining and insocks components for womens town footwear . 12 4.8 Performance requirements for lining and insocks components for fashion footwear . 14 4.9 Performance requirements for lining and insocks components for i

13、nfants footwear . 16 4.10 Performance requirements for lining and insocks components for indoor footwear. 18 5 Marking and labelling . 20 CEN ISO/TR 20882:2007iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodie

14、s). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and n

15、on-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Pa

16、rt 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies castin

17、g a vote. In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vote of its participating members to publish a Technical

18、Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not

19、 be held responsible for identifying any or all such patent rights. ISO/TR 20882 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 309, Footwear, in collaboration with Technical Committee ISO/TC 216, Footwear, in accordance with the Agreement on technical co

20、operation between ISO and CEN (Vienna Agreement). CEN ISO/TR 20882:20071Footwear Performance requirements for components for footwear Lining and insocks 1 Scope This Technical Report establishes the performance requirements for lining and insock components for footwear (not for finished footwear), i

21、rrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements. This Technical Report applies to lining and insocks for all kinds of footwear as defined in Cl

22、ause 3. This Technical Report is intended to be used as a reference between the manufacturer and the supplier. It is not intended for third party certification. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, onl

23、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 31-0, Quantities and units Part 0: General principles ISO 17694, Footwear Test methods for uppers and lining Flex resistance ISO 17696, Footwear Test methods for

24、 uppers, lining and insocks Tear strength ISO 17697, Footwear Test methods for uppers, lining and insocks Seam strength ISO 17699, Footwear Test methods for uppers and lining Water permeability and absorption EN ISO 17700, Footwear Test methods for uppers, linings and insocks Colour fastness to rubb

25、ing ISO 17704, Footwear Test methods for uppers, lining and insocks Abrasion resistance ISO 17705, Footwear Test methods for uppers, lining and insocks Thermal insulation ISO 17709, Footwear Sampling location, preparation and duration of conditioning of samples and test pieces EN ISO 19952, Footwear

26、 Vocabulary ISO 20869, Footwear Test methods for outsoles, insoles, lining and insocks Water soluble content ISO 22649, Footwear Test methods for insoles and insocks Water absorption and desorption ISO 22652, Footwear Test methods for insoles, lining and insocks Perspiration resistance ISO 22653, Fo

27、otwear Test methods for lining and insocks Static friction CEN ISO/TR 20882:20072 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 19952 apply. 4 Requirements 4.1 General This Technical Report establishes two different types of performance requirem

28、ent. The essential requirements shall all be taken into account. The additional ones can be additionally agreed by the component supplier and the footwear manufacturer as indicated in 4.2 to 4.10. The results of each single analytical determination, as well as the average values, shall be rounded of

29、f in accordance with ISO 31-0. When taken from finished footwear, samples shall be prepared in accordance with ISO 17709. 4.2 Performance requirements for lining and insock components for general purpose sports footwear 4.2.1 Essential requirements (lining) These essential requirements shall be fulf

30、illed in all cases. See Table 1. Table 1 Test methods and properties for general sports footwear Essential requirements for linings Test method Property Requirement ISO 17696 Tear strength lining W 15 N reinforcing lining W 20 N (if it applies) ISO 17697 Lining seam strength method A W 4,0 N/mm EN I

31、SO 17700 Colour fastness method A staining W 3 (grey scale) after 50 cycles with perspiration solution ISO 17704 Abrasion resstance 25 600 cycles dry 12 800 cycles wet without hole through the thickness of the material component CEN ISO/TR 20882:200734.2.2 Essential requirements (insocks) These esse

32、ntial requirements shall be fulfilled in all cases. See Table 2. Table 2 Test methods and properties for general sports footwear Essential requirements for insocks Test method Property Requirement EN ISO 17700 Colour fastness method A staining W 3 (grey scale) after 50 cycles with perspiration solut

33、ion ISO 17704 Abrasion resstance 25 600 cycles dry 12 800 cycles wet ISO 22649 Insocks water absorption and desorption (method B) absorption W 70 mg/cm2desorption W 60 % 4.2.3 Additional requirements (lining) These additional requirements should be agreed by both component supplier and footwear manu

34、facturer. See Table 3. Table 3 Test methods and properties for general sports footwear Additional requirements for linings Subclause Test method Property Requirement 4.2.3.1 ISO 17699 Lining water vapour permeability and absorption WVP W 2,0 mg/cm2.h if WVP of upper 0,8 mg/cm2.h then WVA of lining W

35、 8,0 mg/cm24.2.3.2 ISO 20869 Water soluble substances content u 1,5 % sulfated ashed water soluble (SAWS) u 16 % total water soluble (TWS) (testing not necessary to certain lining materials) a4.2.3.3 ISO 22652 Perspiration resistance After five cycles the component shall not develop any cracks when

36、bent, and must keep 80 % tear resistance (testing not necessary to certain lining materials) a4.2.3.4 ISO 22653 Static friction W 0,7 4.2.3.5 ISO 17694 Flex resistance dry 15 000 cycles without visible damage aThis requirement is considered essential for leather. CEN ISO/TR 20882:20074 4.2.4 Additio

37、nal requirements (insocks) These additional requirements should be agreed by both component supplier and footwear manufacturer. See Table 4. Table 4 Test methods and properties for general sports footwear Additional requirements for insocks Subclause Test method Property Requirement 4.2.4.1 ISO 2086

38、9 Water soluble substances content u 1,5 % sulfated ashed water soluble (SAWS) u 16 % total water solubles (TWS) (testing not necessary to certain insocks materials) a4.2.4.2 ISO 22652 Perspiration resistance After five cycles the component shall not develop any cracks when bent, and must keep 80 %

39、tear resistance (testing not necessary to certain insocks materials) 4.2.4.3 ISO 22653 Static friction W 0,7 4.2.4.4 ISO 17694 Flex resistance dry 15 kc without visible damage 4.2.4.5 ISO 17696 Tear strength insocks W 15 N aThis requirement is considered essential for leather. 4.3 Performance requir

40、ements for lining and insocks components for school footwear 4.3.1 Essential requirements (lining) These essential requirements shall be fulfilled in all cases. See Table 5. Table 5 Test methods and properties for school footwear Essential requirements for linings Test method Property Requirement IS

41、O 17696 Tear strength lining W 15 N reinforcing lining W 20 N (if it applies) ISO 17697 Lining seam strength method A W 3,5 N/mm EN ISO 17700 Colour fastness method A staining W 3 (grey scale) after 50 cycles with perspiration solution ISO 17704 Abrasion resstance 25 600 cycles dry 12 800 cycles wet

42、 without hole through the thickness of the material component CEN ISO/TR 20882:200754.3.2 Essential requirements (insocks) These essential requirements shall be fulfilled in all cases. See Table 6. Table 6 Test methods and properties for school footwear Essential requirements for insocks Test method

43、 Property Requirement EN ISO 17700 Colour fastness method A staining W 3 (grey scale) after 50 cycles with perspiration solution ISO 17704 Abrasion resistance 25 600 cycles dry 12 800 cycles wet ISO 22649 Insocks water absorption and desorption (method B) absorption W 70 mg/cm2desorption W 60 % 4.3.

44、3 Additional requirements (lining) These additional requirements should be agreed by both component supplier and footwear manufacturer. See Table 7. Table 7 Test methods and properties for school footwear Additional requirements for linings Subclause Test method Property Requirement 4.3.3.1 ISO 1769

45、9 Lining water vapour permeability and absorption WVP W 2,0 mg/cm2.h if WVP of upper 0,8 mg/cm2.h then WVA of lining W 8,0 mg/cm24.3.3.2 ISO 20869 Water soluble substances content u 1,5 % sulfated ashed water soluble (SAWS) u 16 % total water soluble, (TWS) (testing not necessary to certain lining m

46、aterials) a4.3.3.3 ISO 22652 Perspiration resistance After three cycles the component shall not develop any cracks when bent, and must keep 80 % tear resistance (testing not necessary to certain lining materials) 4.3.3.4 ISO 22653 Static friction W 0,7 4.3.3.5 ISO 17694 Flex resistance dry 15 000 cy

47、cles without visible damage aThis requirement is considered essential for leather. CEN ISO/TR 20882:20076 4.3.4 Additional requirements (insocks) These additional requirements should be agreed by both component supplier and footwear manufacturer. See Table 8. Table 8 Test methods and properties for

48、school footwear Additional requirements for insocks Subclause Test method Property Requirement 4.3.4.1 ISO 20869 Water soluble substances content u 1,5 % sulfated ashed water soluble (SAWS) u 16 % total water soluble (TWS) (testing not necessary to certain insocks materials) a4.3.4.2 ISO 22652 Persp

49、iration resistance After three cycles the component shall not develop any cracks when bent, and must keep 80 % tear resistance (testing not necessary to certain insocks materials) 4.3.4.3 ISO 22653 Static friction W 0,7 4.3.4.4 ISO 17694 Flex resistance dry 15 000 cycles without visible damage 4.3.4.5 ISO 17696 Tear strength insocks W 15 N aThis requirement is considered essential for leather. 4.4 Performance requirements for lining and insocks components for casual footwear 4.4.1