EN ISO TS 16407-1-2011 en Electronic fee collection - Evaluation of equipment for conformity to ISO TS 17575-1 - Part 1 Test suite structure and test purposes《电子收费 符合ISO TS 17575 1.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDD CEN ISO/TS 16407-1:2011Electronic fee collection Evaluation of equipment forconformity to ISO/TS 17575-1Part 1: Test suite structure and test purposes(ISO/TS 16407-1:2011)DD C

2、EN ISO/TS 16407-1:2011 DRAFT FOR DEVELOPMENTNational forewordThis Draft for Development is the UK implementation of CEN ISO/TS16407-1:2011.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publicationsand is of a provisional nature

3、. It should be applied on thisprovisional basis, so that information and experience of its practicalapplication can be obtained.Comments arising from the use of this Draft for Developmentare requested so that UK experience can be reported to theinternational organization responsible for its conversi

4、on toan international standard. A review of this publication willbe initiated not later than 3 years after its publication by theinternational organization so that a decision can be taken on itsstatus. Notification of the start of the review period will be made inan announcement in the appropriate i

5、ssue of Update Standards.According to the replies received by the end of the review period,the responsible BSI Committee will decide whether to support theconversion into an international Standard, to extend the life of theTechnical Specification or to withdraw it. Comments should be sentto the Secr

6、etary of the responsible BSI Technical Committee at BritishStandards House, 389 Chiswick High Road, London W4 4AL.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Road transport informatics.A list of organizations represented on this committee can beobtained on re

7、quest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 71678 2ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immuni

8、ty fromlegal obligations.This Draft for Development was published under the authority ofthe Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedTECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16407-1 Octob

9、er 2011 ICS 35.240.60; 03.220.20 English Version Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) Perception du tlpage - valuation de la conformit de lquipement lISO/TS 17575-1 - Partie 1: Stru

10、cture de la suite dessais et objectifs des essais (ISO/TS 16407-1:2011) Elektronische Gebhrenerfassung - Konformittsevaluierung von Gerten gem CEN ISO/TS 17575-1 - Teil 1: Struktur der Testflle und deren Absichten (ISO/TS 16407-1:2011) This Technical Specification (CEN/TS) was approved by CEN on 15

11、August 2011 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members ar

12、e required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possib

13、le conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No

14、rway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any for

15、m and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 16407-1:2011: EDD CEN ISO/TS 16407-1:2011CEN ISO/TS 16407-1:2011 (E) 3 Foreword This document (CEN ISO/TS 16407-1:2011) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics”, the

16、 secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 204 “Intelligent transport systems”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident

17、ifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

18、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DD CEN ISO/TS 16407-1:2011ISO/TS 16407-1:2011(E) ISO 2011 All rights reserved iiiContents P

19、age Foreword iv Introduction . v 1 Scope 1 2 Normative references 2 3 Terms and definitions . 2 4 Abbreviated terms . 3 5 Value added tax (VAT) Test Suite Structure (TSS) . 4 5.1 Structure . 4 5.2 Reference to conformance test specifications 4 5.3 Test purposes (TP) 5 5.4 Conformance test report . 6

20、 Annex A (normative) Test purposes (TP) for Front End . 7 Annex B (normative) Test purposes (TP) for Back End 87 Annex C (normative) Data Structures . 90 Annex D (normative) PCTR for Front End 91 Annex E (normative) PCTR for Back End . 97 Bibliography 101 DD CEN ISO/TS 16407-1:2011ISO/TS 16407-1:201

21、1(E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i

22、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn

23、ical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by th

24、e technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical comm

25、ittee may decide to publish other types of document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote;

26、an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will

27、be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn t

28、o the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TS 16407-1 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in collaboration with Techn

29、ical Committee CEN/TC 278, Road Transport and Traffic Telematics. ISO/TS 16407 consists of the following parts, under the general title Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-1: Part 1: Test suite structure and test purposes Part 2: Abstract test suite DD CE

30、N ISO/TS 16407-1:2011ISO/TS 16407-1:2011(E) ISO 2011 All rights reserved vIntroduction This part of ISO/TS 16407 is part of a set of standards that supports interoperability of autonomous electronic fee collection (EFC) systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context da

31、ta, their charge reports and their use of communication infrastructure. Within the suite of EFC standards, this conformance evaluation procedure defines the process and tests for conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-1. This part of ISO/TS

32、16407 is intended to assess Front End and Back End capabilities, assess Front End and Back End behaviour, serve as a guide for Front End and Back End conformance evaluations and type approvals, achieve comparability between the results of the corresponding tests applied in different places at differ

33、ent times, and facilitate communication between parties. This part of ISO 16407 is based on ISO/TS 17575-1, and the ISO 9646 family of standards on conformance test methodology. DD CEN ISO/TS 16407-1:2011DD CEN ISO/TS 16407-1:2011TECHNICAL SPECIFICATION ISO/TS 16407-1:2011(E) ISO 2011 All rights res

34、erved 1Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-1 Part 1: Test suite structure and test purposes 1 Scope This part of ISO/TS 16407 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of Front End and Back End to ISO/TS 17

35、575-1. The objective of this part of ISO/TS 16407 is to provide a basis for conformance tests for the Front End and the Back End in electronic fee collection (EFC) based on autonomous on-board equipment (OBE) to enable interoperability between different equipment supplied by different manufacturers.

36、 Autonomous OBE operates without relying on dedicated road-side infrastructure by employing wide-area technologies such as global navigation satellite systems (GNSS) and cellular communications networks (CN). These EFC systems are referred to by a variety of names. Besides the terms autonomous syste

37、ms and GNSS/CN systems, also the terms GPS/GSM systems and wide-area charging systems are in use. Autonomous systems use satellite positioning, often combined with additional sensor technologies such as gyroscopes, odometers, and accelerometers, to localise the vehicle and to find its position on a

38、map containing the charged geographic objects, such as charged roads or charged areas. From the charged objects, the vehicle characteristics, the time of day and other data that are relevant for describing road use, the tariff and ultimately the road usage fee is determined. The testing of the follo

39、wing behaviours and functionalities is outside of the scope of this part of ISO/TS 16407: dynamic behaviour, i.e. sequence of messages and triggering events that must be exchanged/happen to fulfil certain charging scenarios; profiles and business logic built on top of particular pricing schemas; aut

40、hentication, as its handling is not described in ISO/TS 17575-1; account update procedure (“reload“ and “add to account“) with respect to time and duration based on on-board accounts, as run-time environment has significant impact on test purpose outcome. As ISO/TS 17575-1 does not specify any inval

41、id behaviour of Front End and Back End, BI test purposes are not applicable for any test purpose group. As ISO/TS 17575-1 does not define which of the data elements shall be present in the charge report response (CRR) (and under which conditions), the scope of test purposes (TP) for Back End is very

42、 limited. DD CEN ISO/TS 16407-1:2011ISO/TS 16407-1:2011(E) 2 ISO 2011 All rights reserved2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

43、of the referenced document (including any amendments) applies. ISO/IEC 9646-6, Information technology Open Systems Interconnection Conformance testing methodology and framework Part 6: Protocol profile test specification ISO/TS 17575-1, Electronic fee collection Application interface definition for

44、autonomous systems Part 1: Charging 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 attribute application information formed by one or by a sequence of data elements, and that is managed by different actions used for implementation of a trans

45、action ISO 14906:2011, definition 3.3 3.2 authenticator data appended to, or a cryptographic transformation of, a data unit that allows a recipient of the data unit to prove the source and/or the integrity of the data unit and protect against forgery ISO 14906:2011, definition 3.4 3.3 Back End gener

46、ic name for the computing and communication facilities of the Service Provider and/or the Toll Charger ISO/TS 17575-1:2010, definition 3.4 3.4 charge report data structure transmitted from the Front End to the Back End to report road usage data and supplementary related information ISO/TS 17575-1:20

47、10, definition 3.5 3.5 contract expression of an agreement between two or more parties concerning the use of the road infrastructure ISO 14906:2011, definition 3.7 3.6 data element datum, which might itself consist of lower level data elements ISO/TS 17575-1:2010, definition 3.10 DD CEN ISO/TS 16407

48、-1:2011ISO/TS 16407-1:2011(E) ISO 2011 All rights reserved 33.7 Front End part(s) of the toll system where road usage data for an individual road user are collected, processed and delivered to the Back End NOTE The Front End comprises the on-board equipment and an optional proxy. ISO/TS 17575-1:2010

49、, definition 3.13 3.8 service provider operator that accepts the users payment means and in return provides a road-use service to the user NOTE Taken from ISO 14906:2004. 3.9 toll charger legal entity charging a toll for vehicles in a toll domain ISO/TS 17574:2009, definition 3.27 3.10 toll context logical view of a toll scheme as defined by attributes and functions ISO/TS 17575-1:2010, definition 3.22 3.11 toll regime set of rules, including enforcement rules, governing the col