EN ISO TS 16530-2-2015 en Well integrity - Part 2 Well integrity for the operational phase.pdf

1、BSI Standards PublicationWell integrityPart 2: Well integrity for the operational phasePD CEN ISO/TS 16530-2:2015National forewordThis Published Document is the UK implementation of CEN ISO/TS16530-2:2015. It is identical to ISO/TS 16530-2:2014.The UK participation in its preparation was entrusted b

2、y TechnicalCommittee PSE/17, Materials and equipment for petroleum, petrochemicaland natural gas industries, to Panel PSE/17/-/4, Drilling and productionequipment for petroleum and natural gas industries.A list of organizations represented on this committee can be obtained onrequest to its secretary

3、.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 81937 7ICS 75.180.10Compliance with a British Standard cannot confe

4、r immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN ISO/TS 16530-2:2015TECHNICAL SPECIFICATION SPCIFICATION

5、 TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 16530-2 December 2015 ICS 75.180.10 English Version Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) Intgrit du puits - Partie 2: Intgrit du puits pour la phase oprationnelle (ISO/TS 16530-2:2014) Bohrungsintegritt

6、 - Teil 2: Bohrungsintegritt fr die Betriebsphase (ISO/TS 16530-2:2014) This Technical Specification (CEN/TS) was approved by CEN on 28 March 2015 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be reques

7、ted to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form.

8、It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denm

9、ark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE

10、FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 16530-2:2015 EPD CEN IS

11、O/TS 16530-2:2015CEN ISO/TS 16530-2:2015 (E) 2 Contents Page European foreword . 3 PD CEN ISO/TS 16530-2:2015CEN ISO/TS 16530-2:2015 (E) 3 European foreword The text of ISO/TS 16530-2:2014 has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum,

12、 petrochemical and natural gas industries” of the International Organization for Standardization (ISO) and has been taken over as CEN ISO/TS 16530-2:2015 by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries” the secret

13、ariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, th

14、e national standards organizations of the following countries are bound to announce this Technical Report: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

15、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/TS 16530-2:2014 has been approved by CEN as CEN ISO/TS 16530-2:2015 without any modification. PD CEN ISO/TS

16、 16530-2:2015ISO/TS 16530-2:2014(E) ISO 2014 All rights reserved iiiContents PageForeword viIntroduction vii1 Scope . 12 Normative references 23 Terms, definitions and abbreviated terms 24 Abbreviated terms 85 Well integrity management system .105.1 Well integrity management . 105.2 Well integrity m

17、anagement system 106 Well integrity policy and strategy 106.1 Well integrity policy 106.2 Well integrity strategy . 107 Resources, roles, responsibilities and authority levels 117.1 Organizational structure . 117.2 Competency 118 Risk assessment aspects of well integrity management 118.1 General 118

18、.2 Risk assessment considerations for well integrity .128.3 Risk assessment techniques . 158.4 Application of risk assessment in establishing monitoring, surveillance and maintenance requirements . 168.5 Application of risk assessment in the assessment of well integrity anomalies .178.6 Failure rate

19、 trending . 179 Well barriers 189.1 General 189.2 Barrier philosophy 189.3 Well barrier envelopes 199.4 Well barrier element . 199.5 Documenting of well barrier envelopes and well barrier elements 2010 Well component performance standard .2010.1 General 2010.2 Acceptance criteria and acceptable leak

20、 rates 2110.3 Measuring the leak rate 2310.4 Effects of temperature . 2310.5 Direction of flow . 2310.6 Integrity of barriers to conduct well maintenance and repair .2310.7 ESD/related safety systems 2310.8 Well component operating procedure . 2411 Well operating and component limits .2411.1 Well op

21、erating limits . 2411.2 Well load and tubular stress analysis . 2511.3 Further well-use review . 2611.4 End-of-life review 2611.5 Management of change to the operating limits .2612 Well monitoring and surveillance .2612.1 General 2612.2 Monitoring and surveillance frequency . 2712.3 Shut-in wells .

22、2712.4 Suspended wells . 27PD CEN ISO/TS 16530-2:2015ISO/TS 16530-2:2014(E)iv ISO 2014 All rights reserved12.5 Visual inspection 2812.6 Well logging 2812.7 Corrosion monitoring. 2912.8 Cathodic protection monitoring 2912.9 Erosion monitoring 3012.10 Structural integrity monitoring . 3013 Annular pre

23、ssure management .3213.1 General 3213.2 Management . 3213.3 Sources of annular pressure . 3213.4 Annulus pressure monitoring and testing . 3313.5 Frequency of monitoring tubing and annulus casing pressures .3313.6 Identification of an annulus pressure source 3413.7 Maximum allowable annular surface

24、pressure 3413.8 Maintaining annulus pressure within the thresholds 3713.9 Review and change of MAASP and thresholds3714 Well handover.3814.1 General 3815 Well maintenance .3915.1 General 3915.2 Replacement parts 4015.3 Frequency of maintenance. 4015.4 Component testing methods 4015.5 Leak testing .

25、4216 Well integrity failure management 4316.1 General 4316.2 Integrity failure ranking and prioritization 4316.3 Well failure model . 4317 Management of change .4417.1 General 4417.2 Integrity deviation process . 4517.3 Deviation from the well performance standard 4517.4 MOC Process . 4518 Well reco

26、rds and well integrity reporting .4618.1 General 4618.2 Well records 4718.3 Reports 4719 Performance monitoring of well integrity management systems 4819.1 Performance monitoring and continuous improvement .4819.2 Performance review 4819.3 Key performance indicator monitoring 5020 Compliance audit 5

27、120.1 General 5120.2 Audit process . 52Annex A (informative) Well integrity roles and responsibilities chart .53Annex B (informative) Example of competency matrix .54Annex C (informative) Barrier element acceptance table .55Annex D (informative) Well barrier schematic .56Annex E (informative) Exampl

28、e Performance standard for well safety critical elements .58Annex F (informative) Well barrier elements, functions and failure modes .59Annex G (informative) Example of possible well leak paths .62PD CEN ISO/TS 16530-2:2015ISO/TS 16530-2:2014(E) ISO 2014 All rights reserved vAnnex H (informative) Ex

29、ample of leak testing gas lift valves 64Annex I (informative) Leak rate determination calculations 66Annex J (informative) Well operating limits 69Annex K (informative) MAASP calculations .71Annex L (informative) Example A change in MAASP calculation 79Annex M (normative) Information required of wel

30、l handover .81Annex N (informative) Function testing by analysing hydraulic signature .84Bibliography .86PD CEN ISO/TS 16530-2:2015ISO/TS 16530-2:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The wo

31、rk of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governm

32、ental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in th

33、e ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the poss

34、ibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list o

35、f patent declarations received (see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as

36、 information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural

37、gas industries, Subcommittee SC 4, Drilling and production equipment.ISO/TS 16530 consists of the following parts, under the general title Well integrity: Part 2: Well integrity for the operational phaseThe following parts are under preparation: Part 1: Life cycle governance manualvi ISO 2014 All ri

38、ghts reservedPD CEN ISO/TS 16530-2:2015ISO/TS 16530-2:2014(E)IntroductionThis Technical Specification has been developed by producing operating companies for oil and gas, and is intended for use in the petroleum and natural gas industry worldwide. This Technical Specification is intended to give req

39、uirements and information to the Well Operator on managing well integrity for the operational phase. Furthermore, this Technical Specification addresses the minimum compliance requirements for the Well Operator, in order to claim conformity with this Technical Specification.It is necessary that user

40、s of this Technical Specification are aware that requirements above those outlined in this Technical Specification can be needed for individual applications. This Technical Specification is not intended to inhibit or replace legal requirements; it is in addition to the legal requirements; where ther

41、e is a conflict the legal requirement always takes precedence. This can be particularly applicable where there is innovative or developing technology, with changes in field or well design operating philosophy.This Technical Specification addresses the process of managing well integrity by assuring c

42、ompliance to the specified operating limits for identified well types, that are defined based on exposure of risk to people, environment, assets and reputation, supported by associated well maintenance/monitoring plans, technical reviews and management of change.The following terminology is used in

43、this Technical Specification.a) The term “shall” or “must” denotes a minimum requirement in order to conform to this Technical Specification.b) The term “should” denotes a recommendation or that which is advised but not required in order to conform to this Technical Specification.c) The term “may” i

44、s used to indicate a course of action permissible within the limits of the document.d) The term “consider” is used to indicate a suggestion or to advise.e) The term “can” is used to express possibility or capability. ISO 2014 All rights reserved viiPD CEN ISO/TS 16530-2:2015Well integrity Part 2: We

45、ll integrity for the operational phaseIMPORTANT The electronic file of this document contains colours which are considered to be useful for the correct understanding of the document. Users should therefore consider printing this document using a colour printer.1 ScopeThis Technical Specification pro

46、vides requirements and methods to the oil and gas industry to manage well integrity during the well operational phase.The operational phase is considered to extend from handover of the well after construction, to handover prior to abandonment. This represents only the period during the life cycle of

47、 the well when it is being operated and is illustrated in Figure 1.The scope of the Technical Specification includes: A description of the processes required to assess and manage risk within a defined framework. The risk assessment process also applies when deviating from this Technical Specificatio

48、n. The process of managing well integrity by operating wells in compliance with operating limits for all well types that are defined based on exposure of risk to people, environment, assets and reputation. The management of well integrity is supported by associated maintenance/monitoring plans, tech

49、nical reviews and the management of change. The assessment of existing assets (wells / fields) in order to start the process of Well Integrity Management in accordance with this technical specification. The handover process required when changing from one activity to another during the operational phase.The scope of the Technical Specification applies to all wells that are utilized by the oil and gas industry, regardless of their age, type or location.The scope of the Technical Specification does NOT apply to: The periods during well