EN ISO TS 18234-10-2013 en Intelligent transport systems - Traffic and travel information via transport protocol experts group generation 1 (TPEG1) binary data format - Part 10 Con.pdf

1、BSI Standards PublicationPD CEN ISO/TS 18234-10:2013Intelligent transport systems Traffic and travel informationvia transport protocol expertsgroup, generation 1 (TPEG1)binary data formatPart 10: Conditional access information(TPEG1-CAI)PD CEN ISO/TS 18234-10:2013 PUBLISHED DOCUMENTNational foreword

2、This Published Document is the UK implementation of CEN ISO/TS18234-10:2013.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publica

3、tion does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 72144 1ICS 35.240.60Compliance with a British Standard cannot confer immunity fro

4、mlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 October 2013.Amendments issued since publicationDate Text affectedTECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18234-10 October 2013

5、ICS 35.240.60 English Version Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 10: Conditional access information (TPEG1-CAI) (ISO/TS 18234-10:2013) Systmes intelligents de transport - Informations sur

6、 le traficet le tourisme via les donnes de format binaire du groupe dexperts du protocole de transport, gnration 1 (TPEG1) -Partie 10: Information daccs conditionnel (TPEG1-CAI) (ISO/TS 18234-10:2013) Intelligente Transportsysteme - Reise- und Verkehrsinformation ber Datenstrme der Transportprotokol

7、l Expertengruppe (TPEG) - Teil 10: Bedingte Zugriffsinformationen (TPEG-CAI) (ISO/TS 18234-10:2013) This Technical Specification (CEN/TS) was approved by CEN on 15 July 2013 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the me

8、mbers of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national lev

9、el in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, C

10、yprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

11、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN IS

12、O/TS 18234-10:2013 EPD CEN ISO/TS 18234-10:2013CEN ISO/TS 18234-10:2013 (E) 3 Foreword This document (CEN ISO/TS 18234-10:2013) has been prepared by Technical Committee ISO/TC 204 “Intelligent transport systems“ in collaboration with Technical Committee CEN/TC 278 “Intelligent transport systems” the

13、 secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulation

14、s, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It

15、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO/TS 18234-10:2013 has been approved by CEN as CEN ISO/TS 18234-10:2013 without any modification.

16、 PD CEN ISO/TS 18234-10:2013ISO/TS 18234-10:2013(E) ISO 2013 All rights reserved iiiContents Page Foreword iv Introduction vi 1 Scope 1 2 Normative References . 1 3 Abbreviated terms . 1 4 Application identification and version number signalling 2 4.1 Application identification 2 4.2 Version number

17、signalling . 2 5 Service Component Data 3 6 Conditional Access Methodology 3 7 Message Components 4 7.1 List of Generic Component Ids 4 7.2 CAIMessage . 5 7.3 CAIDataUnit 5 Annex A (normative) Binary SSF and Data Types . 6 A.1 Conventions and symbols 6 A.1.1 Conventions . 6 A.1.2 Symbols 6 A.2 Repre

18、sentation of syntax 7 A.2.1 General . 7 A.2.2 Data type notation . 7 A.2.3 Application dependent data types . 10 A.2.4 Toolkits and external definition . 14 A.2.5 Application design principles 15 A.3 TPEG data stream description . 15 A.3.1 Diagrammatic hierarchy representation of frame structure . 1

19、5 A.3.2 Syntactical Representation of the TPEG Stream . 16 A.3.3 Description of data on Transport level 20 A.3.4 Description of data on Service level 22 A.3.5 Description of data on Service component level . 22 A.4 General binary data types 23 A.4.1 Primitive data types . 23 A.4.2 Compound data type

20、s . 28 A.4.3 Table definitions 31 A.4.4 Tables . 32 Bibliography 48 PD CEN ISO/TS 18234-10:2013ISO/TS 18234-10:2013(E) iv ISO 2013 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work

21、 of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmen

22、tal, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The ma

23、in task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In

24、 other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group

25、 and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the mem

26、bers of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further t

27、hree years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent right

28、s. ISO/TS 18234-10 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 278, Road transport and traffic telematics, in collaboration with ISO Technical Committee ISO/TC 204, Intelligent transport systems, in accordance with the Agreement on technical cooperatio

29、n between ISO and CEN (Vienna Agreement). ISO/TS 18234 consists of the following parts, under the general title Intelligent transport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format: Part 1: Introduction, numbering and versions (TP

30、EG1-INV) Part 2: Syntax, semantics and framing structure (TPEG1-SSF) Part 3: Service and network information(TPEG1-SNI) Part 4: Road Traffic Message application (TPEG1-RTM) Part 5: Public Transport Information (PTI) application Part 6: Location referencing applications PD CEN ISO/TS 18234-10:2013ISO

31、/TS 18234-10:2013(E) ISO 2013 All rights reserved v Part 7: Parking information (TPEG1-PK1) Part 8: Congestion and travel-time application (TPEG1-CTT) Part 9: Traffic event compact (TPEG1-TEC) Part 10: Conditional access information (TPEG1-CAI) Part 11: Location Referencing Container (TPEG1-LRC) PD

32、CEN ISO/TS 18234-10:2013ISO/TS 18234-10:2013(E) vi ISO 2013 All rights reservedIntroduction TPEG technology uses a byte-oriented data stream format, which may be carried on almost any digital bearer with an appropriate adaptation layer. TPEG-messages are delivered from service providers to end-users

33、 and used to transfer information from the database of a service provider to an end-users equipment. The brief history of TPEG technology development dates back to the European Broadcasting Union (EBU) Broadcast Management Committee establishing the B/TPEG project group in autumn 1997 with the manda

34、te to develop, as soon as possible, a new protocol for broadcasting traffic and travel-related information in the multimedia environment. TPEG technology, its applications and service features are designed to enable travel-related messages to be coded, decoded, filtered and understood by humans (vis

35、ually and/or audibly in the users language) and by agent systems. One year later in December 1998, the B/TPEG group produced its first EBU specifications. Two Technical Specifications were released. ISO/TS 18234-2, described the Syntax, Semantics and Framing Structure, which is used for all TPEG app

36、lications. ISO/TS 18234-4 (TPEG-RTM) described the first application, for Road Traffic Messages. Subsequently, CEN/TC 278/WG 4, in conjunction with ISO/TC 204, established a project group comprising the members of B/TPEG and they have continued the work concurrently since March 1999. Since then two

37、further parts were developed to make the initial complete set of four parts, enabling the implementation of a consistent service. ISO/TS 18234-3 (TPEG-SNI) describes the Service and Network Information Application, which should be used by all service implementations to ensure appropriate referencing

38、 from one service source to another. ISO/TS 18234-1 (TPEG-INV), completes the series, by describing the other parts and their relationship; it also contains the application IDs used within the other parts. Additionally ISO/TS 18234-5 the Public Transport Information Application (TPEG-PTI) and ISO/TS

39、 18234-6 (TPEG-LRC), were developed. TPEG applications are developed using UML modelling and a software tool is used to automatically select content which then populates this TS. Diagrammatic extracts from the model are used to show the capability of the binary coding in place of lengthy text descri

40、ptions; the diagrams do not necessarily include all relevant content possible. This Technical Specification describes the binary data format of the on-air interface of the Conditional Access Information application, (TPEG-CAI) with the technical version number TPEG-CAI_1.0/001. CAI application The b

41、asic concept behind the CAI application is to transport CAI in separate TPEG service components of a dedicated application type and to define an SNI table that contains the link between scrambled content and related CAI. PD CEN ISO/TS 18234-10:2013TECHNICAL SPECIFICATION ISO/TS 18234-10:2013(E) ISO

42、2013 All rights reserved 1Intelligent transport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format Part 10: Conditional access information (TPEG-CAI) 1 Scope This Technical Specification contains the definition of the TPEG Conditional

43、 Access Information (CAI) application. It enables dedicated conditional access data, such as management messages (e.g. Control Words and Entitlement Control Messages) to be delivered to recipient client devices. This TPEG application is designed for a service provider to: establish setup, prolongati

44、on or revocation of services to a specific client device, using a limited capacity unidirectional broadcast channel and without recourse to service-client handshaking. This TPEG application defines: the logical channel, for the transmission of the additional CA information (CAI); how the CAI is link

45、ed and synchronized to the scrambled content. This Technical Specification is related to conditional access applied at the service component level of a TPEG service. It is an open design for the integration of various different conditional access systems, externally specified, which are signalled by

46、 the TPEG service Encryption Indicator to allow client devices to operate correctly. 2 Normative References The following referenced documents are indispensable for the application of this Technical Specification. For dated references, only the edition cited applies. For undated references, the late

47、st edition of the referenced document (including any amendments) applies. ISO/TS 18234-1, Intelligent transport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format Part 1: Introduction, numbering and versions (TPEG1-INV) ISO/TS 18234-2

48、, Intelligent transport systems Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format Part 2: Syntax, semantics and framing structure (TPEG1-SSF) ISO/TS 18234-3, Intelligent transport systems Traffic and travel information via transport protocol

49、 experts group, generation 1 (TPEG1) binary data format Part 3: Service and network information (TPEG1-SNI) 3 Abbreviated terms For the purposes of this document, the following abbreviated terms apply. PD CEN ISO/TS 18234-10:2013ISO/TS 18234-10:2013(E) 2 ISO 2013 All rights reservedAID Application Identification CA Conditional Access CAI Conditional Access Information CRC Cyclic redundancy check ECM Entitlement Control Message EMM Entitlement Management Message TPEG Transport Protocol Expert Group SS