1、 ETSI TS 124 002 V3.1.1 (2003-06)Technical Specification Digital cellular telecommunications system (Phase 2+);Universal Mobile Telecommunications System (UMTS);GSM-UMTS Public Land Mobile Network (PLMN)Access Reference Configuration(3GPP TS 24.002 version 3.1.1 Release 1999)GLOBAL SYSTEM FOR MOBILE
2、 COMMUNICATIONSRETSI ETSI TS 124 002 V3.1.1 (2003-06) 1 3GPP TS 24.002 version 3.1.1 Release 1999 Reference RTS/TSGN-0124002v311 Keywords GSM, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C
3、 Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existin
4、g or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present documen
5、t should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright
6、 Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI regis
7、tered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 124 002 V3.1.1 (2003-06)
8、 2 3GPP TS 24.002 version 3.1.1 Release 1999 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be fou
9、nd in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to t
10、he ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fo
11、reword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the c
12、orresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp . ETSI ETSI TS 124 002 V3.1.1 (2003-06) 3 3GPP TS 24.002 version 3.1.1 Release 1999 Contents Intellectual Property Rights2 Foreword.2 Foreword.4
13、1 Scope 5 1.1 References 5 1.2 Abbreviations .7 2 General definitions .7 2.1 Reference Configurations.7 2.2 Functional Groups 7 2.3 Reference Points.7 2.4 Interface Points.7 2.5 Terminal Definitions 7 3 Reference Configuration 8 3.1 Mobile Termination (MT)9 3.2 Void10 4 Physical Realisation .10 Anne
14、x (informative): Change history.12 History 13 ETSI ETSI TS 124 002 V3.1.1 (2003-06) 4 3GPP TS 24.002 version 3.1.1 Release 1999 Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work
15、 within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to
16、TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only change
17、s have been incorporated in the document. ETSI ETSI TS 124 002 V3.1.1 (2003-06) 5 3GPP TS 24.002 version 3.1.1 Release 1999 1 Scope The present document describes the reference configuration for access to a PLMN. A user accesses a PLMN via a number of interfaces, including the MS-BS (in A/Gb mode) a
18、nd UE-UTRAN (in Iu mode) interface. The purpose of this Technical Specification is to indicate the possible access arrangements that may be used in conjunction with the MS-BS (in A/Gb mode) and UE-UTRAN (in Iu mode) interface. 1.1 References The following documents contain provisions which, through
19、reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest versi
20、on applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations
21、and acronyms“. 2 3GPP TS 22.002: “Circuit Bearer Services (BS) supported by a Public Land Mobile Network (PLMN)“. 3 3GPP TS 04.01: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface General aspects and principles“. 4 3GPP TS 04.03: “Digi
22、tal cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Channel structures and access capabilities“. 5 3GPP TS 04.04: “Digital cellular telecommunications system (Phase 2+); layer 1 General requirements“. 6 3GPP TS 04.05: “Digital cellular telecom
23、munications system (Phase 2+); Data Link (DL) layer General aspects“. 7 3GPP TS 04.06: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Data Link (DL) layer specification“. 8 3GPP TS 24.007: “Mobile radio interface signalling layer 3 G
24、eneral aspects“. 9 3GPP TS 24.008: “Mobile radio interface Core Network protocol layer 3 specification“. 10 3GPP TS 24.010: “Mobile radio interface layer 3 Supplementary services specification General aspects“. 11 3GPP TS 24.011: “Point-to-Point (PP) Short Message Service (SMS) support on mobile rad
25、io interface“. 12 3GPP TS 24.012: “Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. 13 3GPP TS 04.13: “Digital cellular telecommunications system (Phase 2+); Performance requirements on mobile radio interface“. 14 3GPP TS 04.21: “Digital cellular telecommunication
26、s system (Phase 2+); Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. ETSI ETSI TS 124 002 V3.1.1 (2003-06) 6 3GPP TS 24.002 version 3.1.1 Release 1999 15 3GPP TS 24.022: “Radio Link Protocol (RLP) for data and telematic services on the Mobile Station - Base Station S
27、ystem (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. 16 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification Formats and coding“. 17 3GPP TS 24.081: “Line identification supplementary services - Stage 3“. 18
28、 3GPP TS 24.082: “Call Forwarding (CF) supplementary services - Stage 3“. 19 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 20 3GPP TS 24.084: “MultiParty (MPTY) supplementary services - Stage 3“. 21 3GPP TS 24.085: “Closed User Group (CUG) supplementary s
29、ervices - Stage 3“. 22 3GPP TS 24.086: “Advice of Charge (AoC) supplementary services - Stage 3“. 23 3GPP TS 24.088: “Call Barring (CB) supplementary services - Stage 3“. 24 3GPP TS 24.090: “Unstructured supplementary services operation - Stage 3“. 25 3GPP TS 05.01: “Digital cellular telecommunicati
30、ons system (Phase 2+); Physical layer on the radio path General description“. 26 3GPP TS 05.02: “Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path“. 27 3GPP TS 05.03: “Digital cellular telecommunications system (Phase 2+); Channel coding“. 28 3
31、GPP TS 05.04: “Digital cellular telecommunications system (Phase 2+); Modulation“. 29 3GPP TS 05.05: “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception“. 30 3GPP TS 05.08: “Digital cellular telecommunications system (Phase 2+); Radio subsystem link control“. 31
32、3GPP TS 05.10: “Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronisation“. 32 3GPP TS 05.90: “Digital cellular telecommunications system (Phase 2+); GSM Electro Magnetic Compatibility (EMC) considerations“. 33 3GPP TS 27.001: “General on Terminal Adaptation Functions (T
33、AF) for Mobile Stations (MS)“. 34 3GPP TS 27.002: “Terminal Adaptation Functions (TAF) for services using asynchronous bearer capabilities“. 35 3GPP TS 27.003: “Terminal Adaptation Functions (TAF) for services using synchronous bearer capabilities“. 36 ITU-T Series V Recommendations: “Data communica
34、tion over the Telephone network“. 37 ITU-T Series X Recommendations: “Data communication networks“. 38 ITU-T Recommendation I.420: “Basic user-network interface“. 39 3GPP TS 21.905: “3G Vocabulary“. 40 3GPP TS 23.910: “Circuit Switched Data Bearer Services“. 41 3GPP TS 25.322: “Radio Link Control (R
35、LC) Protocol Specification“. 42 ITU-T Recommendation V.24 (1996):“List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE)“. ETSI ETSI TS 124 002 V3.1.1 (2003-06) 7 3GPP TS 24.002 version 3.1.1 Release 1999 43 ITU-T Recommendatio
36、n V.28 (1993): “Electrical characteristics for unbalanced double-current interchange circuits“. 44 Infrared Data Association IrDA: “IrPHY Physical layer signalling standard“. 45 Personal Computer Memory Card Association: “PCMCIA 2.1 or PC-Card 3.0 electrical specification or later revisions“. 1.2 Ab
37、breviations Abbreviations used in the present document are listed in 3GPP TS 01.04 and 3GPP TS 21.905. 2 General definitions The following definitions 2.1-2.3 are based on those used for ISDN. 2.1 Reference Configurations Reference Configurations are conceptual configurations useful in identifying a
38、ccess arrangements to a network. Two concepts are used in defining reference configurations: reference points and functional groups. 2.2 Functional Groups Functional Groups are sets of functions which may be needed in network access arrangements. In a particular access arrangement, specific function
39、s in a functional group may or may not be present. Specific functions in a functional group may be performed in one or more pieces of equipment. 2.3 Reference Points Reference Points are the conceptual points dividing functional groups. In a specific access arrangement, a reference point may corresp
40、ond to a physical interface between pieces of equipment, or there may not be any physical interface corresponding to the reference point. 2.4 Interface Points Interface Points are reference points within a PLMN at which a 3GPP specified interface is always identified. 2.5 Terminal Definitions The te
41、rm mobile station ( MS ) in the present document is synonymous with the term user equipment (UE ) in 3G terminology as defined in 3GPP TR 21.905. The term TE2 in the present document is synonymous with the term TE in 3G terminology as defined in 3GPP TR 21.905. The term MT2 in the present document i
42、s synonymous with the term MT in 3G terminology as defined in 3GPP TR 21.905. ETSI ETSI TS 124 002 V3.1.1 (2003-06) 8 3GPP TS 24.002 version 3.1.1 Release 1999 3 Reference Configuration The reference configuration for PLMN (in A/Gb mode) access interfaces is shown in figure 1. : reference point. TE1
43、: ISDN terminal. TE2: V- or X-type terminal. TA: Terminal Adaptor. BSS: Base Station System. MSC: Mobile Switching Centre. Figure 1: PLMN Access Reference Configuration (in A/Gb mode) There are three types of MT: - MT0 includes functions belonging to the functional group MT, with support of no termi
44、nal interfaces. - MT1 includes functions belonging to the functional group MT, and with an interface that complies with the GSM recommmended subset of the ISDN user-network interface specifications. - MT2 includes functions belonging to the functional group MT, and with an interface that complies wi
45、th the 3GPP TS 27.00z series Terminal Adaptation Function specifications. Accordingly, the interchange circuit mapping at the MT2 to TE interface shall comply with the ITU-T V.24 42 recmmendation; while the physical implementation shall conform either to the ITU-T V.28 43, or to the IrDA IrPHY Physi
46、cal signalling standard specification 44, or to the PCMCIA 2.145, or to the PC-Card 3.045, electrical specification or to later revisions. The MT plus any TE/(TE + TA) constitutes the Mobile Station, MS. The terminal equipment functional groups TE1, TE2 and TA are conceptually the same functional gr
47、oups as those in the ISDN. The reference configuration for PLMN (Iu mode) access interfaces is shown in figure 2. ETSI ETSI TS 124 002 V3.1.1 (2003-06) 9 3GPP TS 24.002 version 3.1.1 Release 1999 TETAMTMEUSIMUEUTRAN/CNCcRUu: reference point. TA: Terminal Adaptor. MT: Mobile Termination. ME: Mobile E
48、quipment. UE: User Equipment UTRAN: UMTS Radio Access Network. CN: Core Network. Figure 2: PLMN Access Reference Configuration (Iu mode) There is no reference point identified for the TA Function. The TA Function is considered as a part of the Mobile Termination and with an interface that complies w
49、ith the 3GPP TS 27.00z series Terminal Adaptation Function specifications. 3.1 Mobile Termination (MT) The MT performs the following functions, which performs the following functions: - radio transmission termination; - radio transmission channel management; - terminal capabilities, including presentation of a man-machine interface to a user; - speech encoding/decoding; - error protection for all information sent across the radio path. This includes FEC (forward
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1