ETSI EG 202 150-2003 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Common Text for Application Forms Short Equipment Description Forms (V1 1 1)《电磁兼容性和无线频谱事务(ERM).pdf

1、ETSI EG 202 150 1.1.1 (2003-02) ETSI Guide Electromagnetic compatibility and Radio spectrum Matters (ERM); “Common Text“ for Application Forms/ Short Equipment Description Forms 2 ETSI EG 202 150 VI .I .I (2003-02) Reference DEG/ERM-RP02-056 Keywords radio, receiver, report, testing, transmitter ETS

2、I 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be

3、 downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the re

4、ference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documen

5、ts is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction

6、in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3

7、GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EG 202 150 VI .I .I (2003-02) Contents Intellectual Property Rights . .4 Introduction . .4 Foreword . 4 1 2 3 3.1 3.2 4 4.1 4.2 4.3 4.4 Scope 5 References . .5 Definitions and

8、 abbreviations .6 . 6 6 . Assembling the Forms (e.g. TRFs) . .6 . 6 The various usages of the forms . 6 Tasks of a TB Further guidance to TBs conc . 7 Further comment . . 7 chue of the material to be drafted . Annex A (informative): Proforma . 9 A. 1 A.2 A.2.1 Test Report Forms . . A.2.2 Requests fo

9、r tests . . A.2.3 Relations between files . Copyright release . .9 Files including common text . .9 Annex B (informative): Bibliography . 11 History 12 ETSI 4 ETSI EG 202 150 VI .I .I (2003-02) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been

10、 declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, wh

11、ich is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This ETSI Guide (EG) has been produced by ETSI Technical Committee Elec

12、tromagnetic compatibility and Radio spectrum Matters (EM). The present document covers both Test Report Forms and Requests for Tests (i.e. Application Forms (AFs) and Equipment Description Forms for Testing (EDFs). I n t rod uct ion ETSI has published a number of radio product standards. Such produc

13、ts are expected to be put on the market and used, in accordance with the legal framework in force, e.g. the R or CEPT Recommendation ERC/REC O 1-06 3 Application Forms and Test Report Forms were used, therefore, in CEPT Countries, in particular, by manufacturers wishing to have measurements made a t

14、hird party (e.g. an accredited test house). With the new regime resulting from the implementation of the R - either for the purpose of in house testing (self certification) or in view of third-party testing (either on a manufacturers request or on the request of an organisation responsible for marke

15、t surveillance); and - Type Approval where appropriate. The present document (and corresponding compressed archives) contains the common text to be used in Test Report Forms andor Requests for Tests (i.e. Application Forms andor Equipment Description Forms for Testing). This material is to be comple

16、ted as described in clause 4. The present document is applicable to all Technical Bodies producing Test Report Forms and Requests for Tests (i.e. Application Forms and Equipment Description Forms for Testing). 2 Re fe re nces The following documents contain provisions which, through reference in thi

17、s text, constitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply For a non-specific reference, the latest version applies. Refe

18、renced documents which are not found to be publicly available in the expected location might be found at p. il Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity

19、 (R in countries where the R in countries where the R and in countries where the R to complete it: - in the case of Test Report Forms, with the appropriate set of “one-page measurement result forms“ in order to cover all measurements required in the corresponding standard (on the basis of one “one-p

20、age measurement result forms“ per parameter measured); in the case of Requests for Tests (i.e. AFs and EDFs for Testing), with the appropriate set of details referring to the equipment considered; - and, finally, to ver the package and adapt it as necessary. ETSI Technical Bodies are encouraged to f

21、ollow existing specific “one-page measurement result forms“ (which in some cases may have to consist of more than one A4 page), or adapt existing “one-page measurement result forms“ to their own needs (resulting in one or more A4 pages per parameter to be measured). A set of “one-page measurement re

22、sult forms“ as complete as possible is expected to be available as a “library“ for reference and future use (e.g. to be made available in the ETSI Server). A number of such “one-page measurement result forms“ have been included, as examples, in the proformas attached. These “one-page measurement res

23、ult forms“ are expected to be independent of the “common text“ variant being considered. TRFs under the old regime had been made available for a number of standards, in particular in the PMR area, and can be used to extract “one-page measurement result forms“. The situation is similar in relation to

24、 Requests for Tests (i.e. AFs and EDFs for Testing). 4.3 Further guidance to TBs concerning the structure of the material to be drafted TBs are given the freedom to decide on the type of deliverable they find more convenient for the forms (e.g. AFs and TRFs) under their responsibility: e.g. either u

25、se the TR format or use some “free format“. In order to illustrate these two possibilities: - material relating to TRFs includes text for TRFs formatted as a TR; and - material relating to AFs/EDFs includes text for AFs/EDFs using a free format. For the sake of clarity, the present document incorpor

26、ates two sets of four compressed files, one per variant, corresponding to the various scenarios identified in clause 4.1. However, TBs may find more user friendly to implement those four variants of the “common text“ in a different manner. TBs are free to choose their approach, provided that the var

27、ious scenarios are clearly identified. 4.4 Further comment The major differences identified between the variants of the “common text“ reflect the consequence of the correct words needed in order to fit the various scenarios, e.g.: - in respect to accreditation; - - - in relation to the responsibilit

28、ies of the “applicant“; relations between the “applicant“ and the test house; relations between the “applicant“ and the equipment itself (i.e. effect on the availability of support equipment such as “test fixtures“). ETSI 8 ETSI EG 202 150 VI .I .I (2003-02) 1 2 3 4 The following table illustrates s

29、ome of these points: “in ho use“ “third party“ “market surveillance“ “non R as a result, in the material relating to TRFs, the examples of measurements included are not to be considered as providing an exhaustive list showing measurements to be included. These files can be downloaded from the ETSI p

30、ortal at the following address: htti-:/po-rtal.etsi.6ir/enl/-r testingasp. A.2.1 Test Report Forms The set includes: - TTN-1 for countries where the R - TTN-2 for countries where the R TTN-3 for countries where the R and TTN-4 for countries where the R - AP-2 for countries where the R AP-3 for count

31、ries where the R and AP-4 for countries where the R Uncertainties in the measurement of mobile radio equipment characteristics“. ETSI 12 ETSI EG 202 150 VI .I .I (2003-02) vl.l.l vl.l.l History December 2002 Membership Approval Procedure MV 20030214: 2002-12-17 to 2003-02-14 February 2003 Publication ETSI