ETSI EN 300 065-2-2009 Electromagnetic compatibility and Radio spectrum Matters (ERM) Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational i_1.pdf

1、 ETSI EN 300 065-2 V1.2.1 (2009-05)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Narrow-band direct-printing telegraph equipmentfor receiving meteorological or navigationalinformation (NAVTEX);Part 2: Harmonized EN covering the

2、 essential requirements ofarticle 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Po

3、licy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Ha

4、rmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/

5、34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing

6、the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R Part 3: “Harmon

7、ized EN covering the essential equirements of article 3.3(e) of the R - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were va

8、lid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edit

9、ion of the referenced document (including any amendments) applies. 1 ETSI EN 300 065-1 (V1.2.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 1: Technical chara

10、cteristics and methods of measurement“. 2.2 Informative references The following referenced documents are not essential to the use of the ETSI deliverable but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (in

11、cluding any amendments) applies. Not applicable. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 63 Abbreviations For the purposes of the present document, the following abbreviations apply: NBDP Narrow-Band Direct Printing 4 Technical requirements specifications 4.1 Environmental profile The technical requ

12、irements of the present document apply under the environmental profile for operation of the equipment, which shall be determined by the environmental class of the equipment. The equipment shall comply with all the technical requirements of the present document at all times when operating within the

13、boundary limits of the required operational environmental profile. 4.2 Conformance requirements 4.2.1 Call sensitivity 4.2.1.1 Definition The call sensitivity of the receiver is defined in EN 300 065-1 1, clause 6.1.1. 4.2.1.2 Limit The character error limit for call sensitivity is specified in EN 3

14、00 065-1 1, clause 6.1.3. 4.2.1.3 Conformance Conformance tests as defined in 5.2.1 may be performed. 4.2.2 Interference rejection and blocking immunity 4.2.2.1 Definition Interference rejection and blocking immunity is defined in EN 300 065-1 1, clause 6.2.1. 4.2.2.2 Limit The character error limit

15、 is specified in EN 300 065-1 1, clause 6.2.3. 4.2.2.3 Conformance Conformance tests as defined in 5.2.2 may be performed. 4.2.3 Co-channel rejection 4.2.3.1 Definition The co-channel rejection is defined in EN 300 065-1 1, clause 6.3.1. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 74.2.3.2 Limit The cha

16、racter error limit is specified in EN 300 065-1 1, clause 6.3.3. 4.2.3.3 Conformance Conformance tests as defined in 5.2.3 may be performed. 4.2.4 Intermodulation 4.2.4.1 Definition Intermodulation is defined in EN 300 065-1 1, clause 6.4.1. 4.2.4.2 Limit The character error limit is specified in EN

17、 300 065-1 1, clause 6.4.3. 4.2.4.3 Conformance Conformance tests as defined in 5.2.4 may be performed. 4.2.5 Spurious emissions 4.2.5.1 Definition Spurious emissions are defined in EN 300 065-1 1, clause 6.5.1. 4.2.5.2 Limit Spurious emissions limits are defined in EN 300 065-1 1, clause 6.5.3. 4.2

18、5.3 Conformance Conformance tests as defined in 5.2.5 may be performed. 5 Testing for compliance with technical requirements 5.1 Test conditions, power supply and ambient temperatures 5.1.1 Test conditions These shall be as defined in EN 300 065-1 1, clause 5.1. 5.1.2 Test power source This shall b

19、e as defined in EN 300 065-1 1, clause 5.2. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 85.1.3 Test conditions 5.1.3.1 Normal test conditions 5.1.3.1.1 Normal temperature and humidity The normal temperature and humidity conditions for tests shall be as defined in EN 300 065-1 1, clause 5.3.1. 5.1.3.1.2

20、Normal test power supply The test power supply shall meet the requirements of EN 300 065-1 1, clause 5.3.2. 5.1.3.2 Extreme test conditions 5.1.3.2.1 Extreme temperatures The extreme temperature conditions for tests shall be as defined in EN 300 065-1 1, clause 5.4.1. 5.1.3.2.2 Extreme test power su

21、pply values The extreme test power supply values shall meet the requirements of EN 300 065-1 1, clause 5.4.2. 5.1.3.3 Procedures for tests at extreme temperatures The procedures for test at extreme temperatures shall be as defined in EN 300 065-1 1, clause 5.5. 5.2 Other radio test suites 5.2.1 Call

22、 sensitivity The test specified in EN 300 065-1 1, clause 6.1.2 shall be carried out. 5.2.2 Interference rejection and blocking immunity The test specified in EN 300 065-1 1, clause 6.2.2 shall be carried out. 5.2.3 Co-channel rejection The test specified in EN 300 065-1 1, clause 6.3.2 shall be car

23、ried out. 5.2.4 Intermodulation The test specified in EN 300 065-1 1, clause 6.4.2 shall be carried out. 5.2.5 Spurious emissions The test specified in EN 300 065-1 1, clause 6.5.2 shall be carried out. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 9Annex A (normative): HS Requirements and conformance Tes

24、t specifications Table (HS-RTT) The HS Requirements and conformance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes, as follows: it provides a statement of all the requirements in words and by cross reference to (a) specific clause(s) in the present document or to (a) spe

25、cific clause(s) in (a) specific referenced document(s); it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each r

26、equirement to be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependant on the manufacturer having chosen to support optional functionality defined within the schedule. in the case of Conditional requirements, i

27、t associates the requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referen

28、ced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 300 065-2 The following requirements and test

29、specifications are relevant to the presumption of conformity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfacto

30、ry outcomes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers as

31、sertion supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this

32、field remains blank. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 11Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a larger number of languages for the translation of the titles of Harmonized Standards and

33、 mandated ENs that are to be listed in the Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-approval application. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 12Annex C (informative): Bibli

34、ography Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment

35、and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive“. ETSI ETSI EN 300 065-2 V1.2.1 (2009-05) 13History Document history V1.1.1 May 2001 Publication V1.2.1 January 2009 One-step Approval Procedure OAP 20090514: 2009-01-14 to 2009-05-14 V1.2.1 May 2009 Publication