ETSI EN 300 138-5-2002 Integrated Services Digital Network (ISDN) Digital Subscriber Signalling System No One (DSS1) Protocol Close User Group (CUG) Supplementary Service Part 5 Te_1.pdf

1、ETS I EN 300 1 38-5 V3.1 .I (2002-04) European Sfandard (Telecommunicafions series) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSSI) protocol; Close User Group (CUG) supplementary service; Part 5: Test Suite Structure and Test Purposes (TSS Essential, o

2、r potentially Essential, IPRs notijied to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee c

3、an be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee S

4、ervices and Protocols for Advanced Networks (SPAN). The present document is part 5 of a multi-part deliverable covering the Digital Subscriber Signalling System No. one (DSS 1) protocol specification for the Integrated Services Digital Network (ISDN) Closed User Group (CUG) supplementary service, as

5、 identified below: Part 1: Part 2: Part 3 : Part 4: Part 5: Part 6: “Protocol specification“; “Protocol Implementation Conformance Statement (PICS) proforma specification“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information f

6、or Testing (PIXIT) proforma specification for the user“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network“. The present version updates the references to the basic

7、call specifications. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 19 April 2002 3 1 July 20

8、02 3 1 January 2003 3 1 January 2003 ETSI 5 ETSI EN 300 138-5 V3.1 .I (2002-04) 1 Scope The present document specifies the Test Suite Structure and Test Purposes (TSS Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1 : Protocol speci

9、fication“. ETSI EN 300 138-2 (Vl.3.4): “Integrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification“. ISO/IEC 9646- 1 : “I

10、nformation technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. ISO/I

11、EC 9646-3 : “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. ITU-T Recommendation 1.41 1 (1 993): “ISDN user-network interfaces - Reference configurations“. ETSI EN 300 403-1 : “Integrated

12、 Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1 : Protocol specification ITU-T Recommendation Q.93 1 (1993), modified“. ITU-T Recommendation I. 112: “Vocabulary of terms for ISDNs“. I

13、TU-T Recommendation E. 164: “The international public telecommunication numbering plan“. ITU-T Recommendation 1.2 10: “Principles of telecommunication services supported by an ISDN and the means to describe them“. 21 31 41 51 61 71 SI 91 lo1 ETSI 6 ETSI EN 300 138-5 V3.1 .I (2002-04) 3 Definitions a

14、nd abbreviations 3.1 De fin it ions For the purposes of the present document, the following terms and definitions apply. 3.1.1 Definitions related to conformance testing abstract test case: Refer to ISO/IEC 9646-1 3. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 3. active test: test case where

15、the IUT is required to send a particular message, but not in reaction to a received message This would usually involve the use of PIXIT information to see how this message can be generated and quite often is specified in an ATS using an implicit send event. NOTE: Implementation Under Test (IT): Refe

16、r to ISO/IEC 9646-1 3 implicit send event: Refer to ISO/IEC 9646-3 5. lower tester: Refer to ISO/IEC 9646-1 3. passive test: test case where the IUT is required to respond to a protocol event (e.g. received message) with another protocol event (e.g. send message) which normally does not require any

17、special operator intervention as associated with the implicit send event point of control and observation: Refer to ISO/IEC 9646-1 3. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 3. PICS proforma: Refer to ISO/IEC 9646-1 3. Protocol Implementation extra Information f

18、or Testing (PIXIT): Refer to ISO/IEC 9646- 1 3. PIXIT proforma: Refer to ISO/IEC 9646-1 3. system under test: Refer to ISO/IEC 9646-1 3. Test Purpose (TP): Refer to ISO/IEC 9646-1 3. 3.1.2 Definitions related to EN 300 138-1 Integrated Services Digital Network (ISDN): See ITU-T Recommendation I. 112

19、 SI, definition 308. ISDN number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 network DSSl protocol entity at the Network side of the user-network interface where a T reference point or coincident S and T reference point applies network (S/T): DSSl protoc

20、ol entity at the Network side of the user-network interface where a coincident S and T reference point applies network (T): DSSl protocol entity at the Network side of the user-network interface where a T reference point applies (Network connected to Private ISDN) service; telecommunication service:

21、 See ITU-T Recommendation I. 1 12 SI, definition 20 1. supplementary service: See ITU-T Recommendation 1.210 lo, clause 2.4. ETSI 7 ETSI EN 300 138-5 V3.1 .I (2002-04) 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATM ATS CUG DNF DSS1 IA ICB ISDN IUT

22、NO0 NO 1 NO3 NO4 NO6 NO7 NO 8 NO9 N12 N19 OA OCB ODNS ONF PICS PIXIT TP TSS Abstract Test Method Abstract Test Suite Closed User Group call at Destination Network Failed Digital Subscriber Signalling No 1 Incoming Access Incoming Calls Barred Integrated Services Digital Network Implementation Under

23、Test Null call state Call Initiated call state Outgoing Call Proceeding call state Call Delivered call state Call Present call state Call Received call state Connect Request call state Incoming Call Proceeding call state Disconnect Indication call state Release Request call state Outgoing Access Out

24、going Calls Barred call at Originating and at Destination Network Successful call at Originating Network Failed Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testing Test Purpose Test Suite Structure 4 Test Suite Structure (TSS) CUG - Network Calling use

25、r interface Called user interface I I Defau It request I Explicit I request I I I I lUserwitoutCUGl ODNS ONF DNF ODNS ONF DNF ODNS ONF DNF I (01) (02) (03) (04) (05) (06) (07) (08) (09) NOTE: Numbers in brackets represent group numbers and are used in TP identifiers. Figure 1: Test suite structure E

26、TSI 8 ETSI EN 300 138-5 V3.1 .I (2002-04) 5 Test Purposes (TP) 5.1 I n trod u ction For each test requirement a TP is defied. 5.1.1 Test purpose naming convention The TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to i

27、dentiSl the actual test suite and whether it applies to the network or the user (see table 1). Table 1: TP identifier naming convention scheme Identifier: css-ciutcgroup-cnnn = supplementary service: e.g. “CUG“ = type of IUT: U User N Network = group = seauential number (001-999) 2 digit field repre

28、senting group reference according to TSS 5.1.2 Source of TP definition The TPs are based on EN 300 138-1 i. ETSI 9 TP part Header Stimulus Reaction Message structure ETSI EN 300 138-5 V3.1 .I (2002-04) Text tab CR Ensure that the IUT in the see below for message structure or if the action is sending

29、 see below for message structure , etc. and enters andlorand remains in the same state(s) or and enters state with CR message containing a a) information element with b) a encoded as or including 5.1.3 TP structure Each TP has been written in a manner which is consistent with all other TPs. The inte

30、ntion of this is to make the TPs more readable and checkable. A particular structure has been used and this is illustrated in table 2. This table should be read in conjunction with any TP, i.e. use a TP as an example to fully understand the table. Table 2: Structure of a single TP Example see table

31、1 slause X.X.X VOO, N10, etc. Veceiving a XXXX message :o request a. sends, saves, does, etc. using en bloc sending, . SETUP, FACILITY, CONNECT, . Bearer capability, Facility, . I and back to a orb, 5.1.4 Test strategy As the base standard EN 300 138-1 i contains no explicit requirements for testing

32、, the TPs were generated as a result of an analysis of the base standard and the PICS specification EN 300 138-2 2. The criteria applied include the following: - - only the requirements from the point of view of the T or coincident S and T reference point are considered; whether or not a test case c

33、an be built from the TP is not considered. 5.1.5 Test of call states Many TPs include a reference to the IUTs final call state after the realization of the TP. In these cases the TP includes the requirement to ensure that the IUT has entered this particular final call state. Ensuring that the IUT is

34、 in a particular call state shall be realized by following the procedures described in clause 5.8.10 of EN 300 403-1 7. According to these procedures, the IUT on receipt of a STATUS ENQUIRY message, shall respond with a STATUS message indicating, in the third octet of the Call state information elem

35、ent, the current call state of the IUT. This exchange of messages is not mentioned explicitly in each TP but is considered to be implicit in the reference to the final call state. This way of phrasing the TPs has been used to avoid over-complicating the text and structure of the TPs and to improve t

36、he readability. ETSI 10 ETSI EN 300 138-5 V3.1 .I (2002-04) 5.2 Network TPs for CUG All PICS items referred to in this clause are as specified in EN 300 138-2 2 unless indicated otherwise by another numbered reference. 5.2.1 Calling user interface 5.2.1 .I Explicit request 5.2.1.1.1 CUG call success

37、ful at originating network side and at destination network side NOTE: For all TPs in this clause, the network (IUT) is to be configured so that the called user has subscribed to the CUG service and has the options Incoming Access (IA) set to allow and not Incoming Calls Barred (ICB). This combinatio

38、n is only tested in this clause as the “normal call“ output is the subject of the TPs in clause 5.2.1.2 (Default request). CUG-Nol-O01 Ensure that the IUT in the Outgoing Call Proceeding call state N03, and the calling user has subscribed to the CUG supplementary service and has the options Outgoing

39、 Access (OA) is not allowed, not Outgoing Calls Barred (OCB) and not preferential CUG, and the called user has subscribed to the CUG service and has the options IA set to allowed and not ICB, after the receipt of a SETUP message with a Facility information element containing a cUGCall invoke compone

40、nt with OARequested set to FALSE and CUGIndex included, and there is a match between CUG index and CUG interlock code, to indicate that the called user has entered the alerting phase, clause 9.2.1.1 and tables 5 and 6 - responds with an ALERTING message and enters call state N04. CUG-Nol-O02 Ensure

41、that the IUT in the Outgoing Call Proceeding call state NO3 and the calling user has subscribed to the CUG supplementary service and has the options OA is not allowed, not OCB and not preferential CUG, and the called user has subscribed to the CUG service and has the options IA set to allowed and no

42、t ICB, after the receipt of a SETUP message with a Facility information element containing a cUGCall invoke component with OARequested set to TRUE and CUGIndex included, and there is a match between CUG index and CUG interlock code, to indicate that the called user has entered the alerting phase, cl

43、ause 9.2.1.1 and tables 5 and 6 - responds with an ALERTING message and enters call state N04. CUG-Nol-O03 Ensure that the IUT in the Outgoing Call Proceeding call state NO3 and the calling user has subscribed to the CUG supplementary service and has the options OA is allowed, not OCB and not prefer

44、ential CUG and the called user has subscribed to the CUG service and has the options IA set to allowed and not ICB, after the receipt of a SETUP message with a Facility information element containing a cUGCall invoke component with OARequested set to FALSE and CUGIndex included, and there is a match

45、 between CUG index and CUG interlock code, to indicate that the called user has entered the alerting phase, clause 9.2.1.1 and tables 5 and 6 - responds with an ALERTING message and enters call state N04. CUG-Nol-O04 Ensure that the IUT in the Outgoing Call Proceeding call state NO3 and the calling

46、user has subscribed to the CUG supplementary service and has the options OA is allowed, not OCB and not preferential CUG and the called user has subscribed to the CUG service and has the options IA set to allowed and not ICB, after the receipt of a SETUP message with a Facility information element c

47、ontaining a cUGCall invoke component with OARequested set to TRUE and CUGIndex included, and there is a match between CUG index and CUG interlock code, to indicate that the called user has entered the alerting phase, clause 9.2.1.1 and tables 5 and 6 - responds with an ALERTING message and enters ca

48、ll state N04. ETSI 11 ETSI EN 300 138-5 V3.1 .I (2002-04) CUG-Nol-O05 Ensure that the IUT in the Outgoing Call Proceeding call state NO3 and the calling user has subscribed to the CUG supplementary service and has the options OA is allowed, not OCB and not preferential CUG and the called user has su

49、bscribed to the CUG service and has the options IA set to allowed and not ICB, after the receipt of a SETUP message with a Facility information element containing a cUGCall invoke component with OARequested set to FALSE and CUGIndex is not included, to indicate that the called user has entered the alerting phase, clause 9.2.1.1 and tables 5 and 6 - responds with an ALERTING message and enters call state N04. CUG-Nol-O06 Ensure that the IUT in the Outgoing Call Proceeding call state NO3 and the calling user has subscribed to the CUG supplement