ETSI EN 300 162-2-2006 Electromagnetic compatibility and Radio spectrum Matters (ERM) Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF ban.pdf

1、 ETSI EN 300 162-2 V1.2.1 (2006-12)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Radiotelephone transmitters and receivers forthe maritime mobile service operating in VHF bands;Part 2: Harmonized EN covering essential requireme

2、ntsof article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigati

3、on, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European St

4、andard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) 4

5、 laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999

6、/5/EC 1 of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Part 2: “Harmonized EN covering essential requirements of article 3.2 of the R Part 3: “Harmonized EN covering ess

7、ential requirements of article 3.3 (e) of the R Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement“. 3 ETSI TR 100 028-1 (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ER

8、M); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1“. 4 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. 5 Commission Decis

9、ion of 4 September 2003 on essential requirements relating to marine radio communication equipment which is intended to be used on non-SOLAS vessels and to participate in the Global Maritime Distress and Safety System (GMDSS) (2004/71/EC). ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 7 3 Definitions and

10、abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R - the value of the measurement uncertainty for the measurement of each parameter shall be included in the test report; - the recorded value of the measurement uncertainty shall be, for ea

11、ch measurement, equal to or lower than the figures in table 1. For the test methods, according to the present document, the measurement uncertainty figures shall be calculated in accordance with TR 100 028-1 3 and shall correspond to an expansion factor (coverage factor) k = 1,96 or k = 2 (which pro

12、vide confidence levels of respectively 95 % and 95,45 % in the case where the distributions characterizing the actual measurement uncertainties are normal (Gaussian). Table 1 is based on such expansion factors. Table 1: Absolute measurement uncertainties: maximum values Parameter Maximum uncertainty

13、 RF frequency 1 x 10-7RF power 0,75 dB Maximum frequency deviation: - within 300 Hz to 6 kHz of modulation frequency - within 6 kHz to 25 kHz of modulation frequency 5 % 3 dB Deviation limitation 5 % Adjacent channel power 5 dB Conducted spurious emission of transmitter 4 dB Audio output power 0,5 d

14、B Sensitivity at 20 dB SINAD 3 dB Conducted emission of receiver 3 dB Two-signal measurement 4 dB Three-signal measurement 3 dB Radiated emission of transmitter 6 dB Radiated emission of receiver 6 dB Transmitter transient time 20 % Transmitter transient frequency 250 Hz Receiver desensitization (du

15、plex operation) 0,5 dB ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 135.3 Essential radio test suites 5.3.1 Frequency error The test specified in EN 300 162-1 2, clause 8.1.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.1.2 in order to prove compliance with the

16、 requirement. 5.3.2 Carrier power The test specified in EN 300 162-1 2, clause 8.2.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.2.2 in order to prove compliance with the requirement. 5.3.3 Frequency deviation The test specified in EN 300 162-1 2, clauses

17、 8.3.2.1 and 8.3.3.1 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.3.2 in order to prove compliance with the requirement. 5.3.4 Adjacent channel power The test specified in EN 300 162-1 2, clause 8.7.2 shall be carried out. The results obtained shall be com

18、pared to the limits in clause 4.2.4.2 in order to prove compliance with the requirement. 5.3.5 Conducted spurious emissions conveyed to the antenna The test specified in EN 300 162-1 2, clause 8.8.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.5.2 in order

19、 to prove compliance with the requirement. 5.3.6 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna The test specified in EN 300 162-1 2, clause 8.9.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.6.2 in order to pro

20、ve compliance with the requirement. 5.3.7 Transient frequency behaviour of the transmitter The test specified in EN 300 162-1 2, clause 8.14.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.7.2 in order to prove compliance with the requirement. 5.4 Other tes

21、t specifications 5.4.1 General The requirements in clauses 4.2.8 to 4.2.15 inclusive have been set on the assumption that the test specifications in clauses 5.4.2 to 5.4.9 will be used to verify the performance of the equipment. 5.4.2 Maximum usable sensitivity The test specified in EN 300 162-1 2,

22、clause 9.3.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.8.2 in order to prove compliance with the requirement. 5.4.3 Co-channel rejection The test specified in EN 300 162-1 2, clause 9.4.2 shall be carried out. The results obtained shall be compared to t

23、he limits in clause 4.2.9.2 in order to prove compliance with the requirement. ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 145.4.4 Adjacent channel selectivity The test specified in EN 300 162-1 2, clause 9.5.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.10.2

24、 in order to prove compliance with the requirement. 5.4.5 Spurious response rejection The test specified in EN 300 162-1 2, clause 9.6.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.11.2 in order to prove compliance with the requirement. 5.4.6 Intermodulat

25、ion response The test specified in EN 300 162-1 2, clause 9.7.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.12.2 in order to prove compliance with the requirement. 5.4.7 Blocking or desensitization The test specified in EN 300 162-1 2, clause 9.8.2 shall

26、be carried out. The results obtained shall be compared to the limits in clause 4.2.13.2 in order to prove compliance with the requirement. 5.4.8 Receiver conducted spurious emissions The test specified in EN 300 162-1 2, clause 9.9.2 shall be carried out. The results obtained shall be compared to th

27、e limits in clause 4.2.14.2 in order to prove compliance with the requirement. 5.4.9 Receiver radiated spurious emissions The test specified in EN 300 162-1 2, clause 9.10.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.15.2 in order to prove compliance wit

28、h the requirement. 5.4.10 Receiver desensitization with simultaneous transmission and reception (Duplex operation) The test specified in EN 300 162-1 2, clause 10.1.2 shall be carried out. The results obtained shall be compared to the limits in clause 4.2.16.2 in order to prove compliance with the r

29、equirement. ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 15Annex A (normative): HS Requirements - it provides a statement of all the test procedure corresponding to those essential requirements by cross reference to specific clause(s) in the present document or to a specific clause(s) in specific referen

30、ced document(s); - it qualifies each requirement to be either: - Unconditional: meaning that the requirement applies in all circumstances, or - Conditional: meaning that the requirement is dependent on the supplier having chosen to support optional functionality defined within the schedule; - in the

31、 case of Conditional requirements, it associates the requirement with the particular optional service or functionality; - it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to

32、 be met in accordance with the referenced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted; - when the schedule is completed in respect of a particular equipment including the testing outcomes, includi

33、ng a completed version of table A.1 it provides a means to assert the “presumption of conformity“ with the HS. ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 16Table A.1: HS Requirements those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to

34、the technical requirements. All tests classified “E“ shall be performed as specified with satisfactory outcomes is a necessary condition for a presumption of conformity. Technical requirements associated with tests classified “O“ or “X“ must be complied with as a necessary condition for presumption

35、of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in the technical construction file. Reference: Clause Number Identification of clause(s) defining the test specification in the present, docume

36、nt unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this field remains blank ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 18Annex B (informative): The EN title in the official languages Language EN title Czech Elektromagnetick kompati

37、bilita a rdiov spektrum (ERM); Radiotelefonn vyslae a pijmae pro nmon pohyblivou slubu pracujc v psmech VHF; st 2: Harmonizovan EN pokrvajc zkladn poadavky lnku 3.2 Smrnice R Radiotelefoni sendere og modtagere i den maritime mobile tjeneste, som anvender frekvenser i VHF bndene; Del 2: Harmoniseret

38、EN som dkker de vsentlige krav I R Radiotelefonie apparatuur tbv de maritiem mobiele dienst werkend in de VHF banden; Deel 2: Geharmoniseerde EN welke invulling geeft aan de wezenlijke vereisten, neergelegd in artikel 3.2 van de R Radiotelephone transmitters and receivers for the maritime mobile ser

39、vice operating in VHF bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R VHF raadiosagedusalas ttavad liikuva mereside raadiotelefoni saatjad ja vastuvtjad; Osa 2: Harmoneeritud EN R Siirtyvn meriradioliikenteen VHF - taajuuksilla toimivat radiolhettimet ja vasta

40、anottimet; Osa 2: Harmonisoitu EN, joka kattaa R Partie 2: Norme harmonise couvrant larticle 3.2 de la Directive R UKW-Sprechfunkanlagen fr den mobilen Seefunkdienst; Teil 2: Harmonisierte Europische Norm (EN) mit wesentlichen Anforderungen nach R Sendi- og mttkubnaur metrabylgjutalstvum (VHF) til n

41、ota sjfarstvajnustunni; 2. hluti: Samrmdur Evrpustaall um grunnkrfur skv. 2. mgr. 3. gr. tilskipun 1999/5/EC um fjarskiptabna og endabna til fjarskipta Italian Compatibilit elettromagnetica e Questioni relative allo spettro delle radiofrequenze (ERM); Ricevitori e trasmettitori di radiotelefoni per

42、il servizio mobile marittimo in banda VHF; Parte 2: Norma armonizzata relativa ai requisiti essenziali dellarticolo 3.2 della direttiva R Trasmettituri u rievituri tar-radjotelefonija gal servizz mobbli marittimu li jopera fuq frekwenzi VHF; Parti 2: EM armonizzat li jkopri rekwiiti essenzjali ta l-

43、artiklu 3.2 tad-Direttiva R Radiotelefonsendere og -mottagere for den maritime mobile tjeneste som opererer i VHF-bnd; Del 2: Harmonisert EN som dekker de grunnleggende krav i R receptores e transmissores radiotelefnicos para o servio mvel martimo operando na faixa de VHF; Parte 2: EN harmonizada co

44、brindo os requisitos essenciais no mbito do Artigo 3.2 da Directiva R Transmisores y receptores radiotelfono para el servicio mvil martimo operando en bandas VHF; Parte 2: EN armonizada cubriendo los requisitos esenciales segn el artculo 3.2 de la directiva de R Sndare och mottagare fr radiotelefoni

45、 fr den maritima mobila tjnsten arbetande i VHF-banden; Del 2: Harmoniserad EN omfattande vsentliga krav enligt artikel 3.2 i R&TTE-direktivet ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 20Annex C (informative): Bibliography Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of

46、the Member States relating to electromagnetic compatibility (EMC Directive). Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). ETSI ETSI EN 300 162-2 V1.2.1 (2006-12) 21History Document history V1.1.2 December 2000 Publication V1.2.1 July 2006 One-step Approval Procedure OAP 20061117: 2006-07-19 to 2006-11-17 V1.2.1 December 2006 Publication