1、 ETSI EN 300 175-6 V2.6.1 (2015-07) Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing EUROPEAN STANDARD ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 2 Reference REN/DECT-000304-6 Keywords DECT, IMT-2000, mobility, radio, TDD, TDMA ETSI 650 Route
2、 des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.o
3、rg/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in
4、 contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of s
5、tatus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyrigh
6、t Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The cop
7、yright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI
8、registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g3
9、2 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 General description of FP and PP identities . 9g34.0 Overview 9g34.1 Combinations of ARIs, PARKs and IPUIs . 10g35 FP identities 11g35.0 Genera
10、l . 11g35.1 ARI class A 13g35.2 ARI class B. 14g35.3 ARI class C. 15g35.4 ARI class D 15g35.5 ARl class E . 16g35.6 SARI list structure 17g35.6.0 General 17g35.6.1 ARI list length . 17g35.6.2 TARIs . 17g35.6.3 Black. 17g35.6.4 ARI . 18g35.6.5 Black-ARI . 18g35.6.6 TARI messages . 18g35.6.6.1 Request
11、 message from the PP . 18g35.6.6.2 Response message from the FP . 19g36 PP identities 20g36.0 General . 20g36.1 PARK . 21g36.1.0 General 21g36.1.1 PARK A 21g36.1.2 PARK B 21g36.1.3 PARK C 21g36.1.4 PARK D 21g36.1.5 PARK E 22g36.2 IPUI 22g36.2.0 General 22g36.2.1 Portable user identity type N (reside
12、ntial/default) 22g36.2.2 Portable user identity type S (PSTN/ISDN) . 22g36.2.3 Portable user identity type O (private) 23g36.2.4 Portable user identity type T (private extended) . 23g36.2.5 Portable user identity type P (public/public access service) . 23g36.2.6 Portable user identity type Q (public
13、/general) 24g36.2.7 Portable user identity type U (public/general) 24g36.2.8 Portable user identity type R (public/IMSI) 24g36.3 Individual and group TPUIs . 24g36.3.1 General 24g36.3.2 Individual TPUI 26g36.3.3 Group TPUIs. 26g3ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 4 7 Coding of identities 27g37.
14、0 General . 27g37.1 RFPI E-bit 27g37.2 Access rights codes 27g37.3 Portable user identity types 27g37.4 EMC, EIC and POC . 27g38 Rules for the usage of FP and PP identities 28g38.1 General principles. 28g38.2 PARI, SARI and TARI usage . 28g39 Connection related identities 30g39.0 General . 30g39.1 M
15、AC identities . 30g39.1.0 General 30g39.1.1 FMID 30g39.1.2 PMID 30g39.2 DLC identities 31g39.3 NWK identities . 31g310 Equipment related identities . 31g311 Subscription and registration procedures . 32g3Annex A (informative): Examples of usage of FP and PP identities 33g3A.0 General . 33g3A.1 Resid
16、ential ID usage . 33g3A.2 Public ID usage 33g3A.2.1 Primary . 33g3A.2.2 Secondary . 34g3A.2.3 Tertiary . 34g3A.3 Private ID usage . 35g3A.3.1 Primary . 35g3A.3.2 Secondary . 35g3A.4 Mixed private and public ID usage 35g3A.4.1 Public in private environments . 35g3A.4.2 Private in public environments
17、. 36g3A.5 PARI and SARI use for CTM roaming 36g3Annex B (normative): Identities and addressing timers . 38g3Annex C (normative): Representation of IPEI as printed text 39g3Annex D (informative): Change history . 40g3History 41g3ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 5 Intellectual Property Rights I
18、PRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or
19、potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.
20、 No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Digital En
21、hanced Cordless Telecommunications (DECT). The present document is part 6 of a multi-part deliverable (1 to 8). Full details of the entire series can be found in part 1 1. Further details of the DECT system may be found in ETSI TR 101 178 i.1 and ETSI ETR 043 i.2. National transposition dates Date o
22、f adoption of this EN: 24 July 2015 Date of latest announcement of this EN (doa): 31 October 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 April 2016 Date of withdrawal of any conflicting National Standard (dow): 30 April 2016 Modal verbs terminology
23、In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI d
24、eliverables except when used in direct citation. ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 6 1 Scope The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). This part specifies the identities and addressing structu
25、re of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI). There are four categories of identities to be used for identification and addressing in a general DECT environment. These four categories are: Fixed Part (FP) identities; Portable Part (PP) identities; connection-re
26、lated identities; equipment-related identities. Fixed part identities and portable part identities are used for: access information from fixed parts to portable parts; access requests from portable parts; identification of portable parts; identification of fixed parts and radio fixed parts; paging;
27、billing. These identities support: different environments, such as residential, public or private; supply to manufacturers, installers, and operators of globally unique identity elements with a minimum of central administration; multiple access rights for the same portable; large freedom for manufac
28、turers, installers, and operators to structure the fixed part identities, e.g. to facilitate provision of access rights to groups of DECT systems; roaming agreements between DECT networks run by the same or different owners/operators; indication of handover domains; indication of location areas, i.e
29、. paging area; indication of subscription areas of a public service. The present document also provides for length indicators and other messages that can override the default location and/or paging area and domain indications given by the structure of the identities. Connection related identities ar
30、e used to identify the protocol instances associated with a call and are used for peer-to-peer communication. Equipment related identities are used to identify a stolen PP and to derive a default identity coding for PP emergency call set-up. Coding of identity information elements for higher layer m
31、essages is found in ETSI EN 300 175-5 5, clause 7.7. ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 7 User authentication and ciphering need additional key information and is outside the scope of the present document, but is covered in other parts of ETSI EN 300 175 1 to 8, e.g. ETSI EN 300 175-7 7. The pr
32、esent document includes New Generation DECT, a further development of the DECT standard introducing wideband speech, improved data services, new slot types and other technical enhancements. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or
33、 edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected
34、 location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI
35、EN 300 175-1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. 2 ETSI EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)“. 3 ETSI EN 300 175-3: “Digital Enhanced Cordless Telecommunica
36、tions (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. 4 ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. 5 ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common
37、 Interface (CI); Part 5: Network (NWK) layer“. 6 Void. 7 ETSI EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. 8 ETSI EN 300 175-8: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech and au
38、dio coding and transmission“. 9 Recommendation ITU-T E.164: “The international public telecommunication numbering plan“. 10 Recommendation ITU-T E.212: “The international identification plan for public networks and subscriptions“. 2.2 Informative references References are either specific (identified
39、 by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause
40、were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 101 178: “Digital Enhanced Cordless T
41、elecommunications (DECT); A High Level Guide to the DECT Standardization“. ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 8 i.2 ETSI ETR 043: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Services and facilities requirements specification“. i.3 ETSI TS 123 003: “Digital cellu
42、lar telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Numbering, addressing and identification (3GPP TS 23.003)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 300 175-1 1 ap
43、ply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ARC Access Rights Class ARD Access Rights Details ARI Access Rights Identity BACN Bank ACcount Number BCD Binary Coded Decimal CACN Credit Card ACcount Number CBI Collective Broadcast Identifier CI Co
44、mmon Interface CMD CoMmanD bitCTM Cordless Terminal Mobility DECT Digital Enhanced Cordless Telecommunications DLC Data Link Control EIC Equipment Installers Code EMC Equipment Manufacturers Code FIL FILl bits FMID Fixed part MAC IDentity FP Fixed PartFPN Fixed Part Number FPS Fixed Part Sub-number
45、FT Fixed radio Termination GOP GSM OPerator code GSM Global System for Mobile ID Identification IMSI International Mobile Subscriber Identity IPEI International Portable Equipment Identity IPUI International Portable User Identity ISDN Integrated Services Digital Network LA Location Area LAI Locatio
46、n Area Identification LAL Location Area Level LAN Local Area Network lsb least significant bit LSIG Link SIGnatureMAC Medium Access Control MCC Mobile Country Code MNC Mobile Network Code msb most significant bit NTIdentities information, one N-channel message NWK NetWorK PABX Private Automatic Bran
47、ch eXchange PARI Primary Access Rights Identity PARK Portable Access Rights Key PARKy PARK with value y for its park length indicator ETSI ETSI EN 300 175-6 V2.6.1 (2015-07) 9 PBX Private Branch eXchange PHL PHysical Layer PLI Park Length Indicator PLMN-Id Public Land Mobile Network Identification P
48、MID Portable part MAC IDentity POC Public Operator Code PP Portable PartPSN Portable equipment Serial Number PSTN Public Switched Telephone Network PT Portable radio Termination PUN Portable User Number PUT Portable User TypeQHQ field header QTSystem information and multiframe marker RFP Radio Fixed
49、 Part RFPI Radio Fixed Part Identity RPN Radio fixed Part Number SARI Secondary Access Rights Identity SP-id Service Provider identity TARI Tertiary Access Rights Identity TPUI Temporary Portable User Identity UMTS Universal Mobile Telecommunication Systems WRS Wireless Relay Station 4 General description of FP and PP identities 4.0 Overview Every radio FP broadcasts for its purpose a unique identity which contains a globally unique (to a service provider) Access Rights Identity (ARI). Every
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1