ETSI EN 300 220-2-2017 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz Part 2 Harmonised Standard covering the essential requirements of article 3 2 .pdf

1、 ETSI EN 300 220-2 V3.1.1 (2017-02) Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment HARMONISED EUROPEAN STANDARD ETSI ETSI EN 300 22

2、0-2 V3.1.1 (2017-02) 2 Reference REN/ERM-TG28-534 Keywords harmonised standard, radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous

3、-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall n

4、ot be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secr

5、etariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document,

6、 please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written

7、 permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM

8、and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI E

9、N 300 220-2 V3.1.1 (2017-02) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 10g33.3

10、 Abbreviations . 10g34 Technical requirements specifications . 10g34.1 Environmental profile . 10g34.2 All equipment conformance requirements . 10g34.2.0 Compliance . 10g34.2.1 Operating frequency . 10g34.2.1.0 Applicability 10g34.2.1.1 Description 10g34.2.1.2 Limits 10g34.2.1.3 Conformance . 10g34.

11、2.2 Unwanted emissions in the spurious domain 11g34.2.2.0 Applicability 11g34.2.2.1 Description 11g34.2.2.2 Limits 11g34.2.2.3 Conformance . 11g34.3 Transmitters conformance requirements 11g34.3.1 Effective Radiated Power . 11g34.3.1.0 Applicability 11g34.3.1.1 Description 11g34.3.1.2 Limits 11g34.3

12、.1.3 Conformance . 11g34.3.2 Maximum e.r.p. spectral density . 11g34.3.2.0 Applicability 11g34.3.2.1 Description 11g34.3.2.2 Limits 12g34.3.2.3 Conformance . 12g34.3.3 Duty Cycle 12g34.3.3.0 Applicability 12g34.3.3.1 Description 12g34.3.3.2 Limits 12g34.3.3.3 Conformance . 12g34.3.4 Occupied Bandwid

13、th. 12g34.3.4.0 Applicability 12g34.3.4.1 Description 12g34.3.4.2 Limits 12g34.3.4.3 Conformance . 12g34.3.5 Tx Out of Band Emissions 12g34.3.5.0 Applicability 12g34.3.5.1 Description 13g34.3.5.2 Limits 13g34.3.5.3 Conformance . 13g34.3.6 Transient power 13g34.3.6.0 Applicability 13g3ETSI ETSI EN 30

14、0 220-2 V3.1.1 (2017-02) 4 4.3.6.1 Description 13g34.3.6.2 Limits 13g34.3.6.3 Conformance . 13g34.3.7 Adjacent Channel Power 13g34.3.7.0 Applicability 13g34.3.7.1 Description 13g34.3.7.2 Limits 13g34.3.7.3 Conformance . 13g34.3.8 TX behaviour under Low Voltage Conditions 14g34.3.8.0 Applicability 14

15、g34.3.8.1 Description 14g34.3.8.2 Limits 14g34.3.8.3 Conformance . 14g34.3.9 Adaptive Power Control . 14g34.3.9.0 Applicability 14g34.3.9.1 Description 14g34.3.9.2 Limits 14g34.3.9.3 Conformance . 14g34.3.10 FHSS equipment . 14g34.3.10.0 Applicability 14g34.3.10.1 Description 14g34.3.10.2 Limits 14g

16、34.3.10.3 Conformance . 15g34.3.11 Short term behaviour 15g34.3.11.0 Applicability 15g34.3.11.1 Description 15g34.3.11.2 Limits 15g34.3.11.3 Conformance . 15g34.4 Receivers conformance requirements . 16g34.4.1 RX sensitivity . 16g34.4.1.0 Applicability 16g34.4.1.1 Description 16g34.4.1.2 Limits 16g3

17、4.4.1.3 Conformance . 16g34.4.2 Blocking 16g34.4.2.0 Applicability 16g34.4.2.1 Description 16g34.4.2.2 Limits 16g34.4.2.3 Conformance . 16g34.5 Polite spectrum access conformance requirement 16g34.5.1 Description 16g34.5.2 Clear Channel Assessment threshold 17g34.5.2.0 Applicability 17g34.5.2.1 Desc

18、ription 17g34.5.2.2 Limits 17g34.5.2.3 Conformance . 17g34.5.3 Polite spectrum access timing parameters 17g34.5.3.1 Applicability 17g34.5.3.2 Limits 17g34.5.3.3 Conformance . 17g34.5.4 Adaptive Frequency Agility 17g34.5.4.0 Applicability 17g34.5.4.1 Description 17g34.5.4.2 Limits 17g34.5.4.3 Conform

19、ance . 17g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 18g3Annex B (normative): EU wide harmonised national radio interfaces from 25 MHz to 1 000 MHz . 20g3ETSI ETSI EN 300 220-2 V3.1.1 (2017-02) 5 Annex C (normative): Nat

20、ional Radio Interfaces not EU wide harmonised 23g3Annex D (informative): Application form for testing 28g3D.1 Introduction 28g3D.2 Information to declare according to ETSI EN 300 220-2 28g3Annex E (informative): Selection of technical parameters . 30g3E.1 Introduction 30g3E.2 Receiver parameters . 3

21、0g3Annex F (informative): Bibliography . 31g3Annex G (informative): Change History 32g3History 33g3ETSI ETSI EN 300 220-2 V3.1.1 (2017-02) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to thes

22、e essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest

23、updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

24、server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions s

25、tandardisation request C(2015) 5376 final i.5 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i

26、.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the correspond

27、ing essential requirements of that Directive and associated EFTA regulations. The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 1. For non EU countries the present document may be used for regulatory (Type Approval) purposes. Nationa

28、l transposition dates Date of adoption of this EN: 27 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 Octo

29、ber 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “mu

30、st not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 300 220-2 V3.1.1 (2017-02) 7 Introduction The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz. Full details of

31、 the entire series can be found in part 1 1. The present document is structured as follows: Clause 2 provides references. Clause 3 provides definitions of terms and abbreviations used. Clause 4 provides technical requirements. Annex A (informative) provides a relationship between the present documen

32、t and essential requirements of Directive 2014/53/EU i.2. Annex B (normative): EU wide harmonised national radio interfaces from 25 MHz to 1 000 MHz. Annex C (normative): National Radio Interfaces not EU wide harmonised. Annex D (informative): Application form for testing. Annex E (informative): Sel

33、ection of parameters. Annex F (informative): Bibliography. Annex G (informative): Change History. ETSI ETSI EN 300 220-2 V3.1.1 (2017-02) 8 1 Scope The present document specifies technical characteristics and methods of measurements for Non-specific Short Range Devices category equipment types. Non

34、specific SRDs category is defined by the EU Commission Decision 2013/752/EU i.3 as: “The non-specific short-range device category covers all kinds of radio devices, regardless of the application or the purpose, which fulfil the technical conditions as specified for a given frequency band. Typical us

35、es include telemetry, telecommand, alarms, data transmissions in general and other applications“. The present document covers equipment intended for fixed, mobile or nomadic use, including: stand-alone radio equipment; plug-in radio devices intended for use with or within a variety of host systems;

36、plug-in radio devices intended for use within combined equipment. These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1. Table 1: SRDs frequency ranges Short Range Devices frequency ranges Transmit and receive 26,957 MHz to 27,283 MHz Transmi

37、t and receive 40,660 MHz to 40,700 MHz Transmit and receive 138,2 MHz to 138,45 MHz Transmit and receive 169,4 MHz to 169,8125 MHz Transmit and receive 433,040 MHz to 434,790 MHz Transmit and receive 863 MHz to 876 MHz Transmit and receive 915 MHz to 921 MHz NOTE: It should be noted that not all fre

38、quency bands in table 1 are implemented in all European countries. Annex B provides an overview of radio interfaces which are harmonised in the European Union. Annex C provides an overview of national radio interfaces not harmonised in the European Union. It is noted that in the European Commission

39、Decision on Short Range Devices i.3, some harmonised frequency bands may be subject to usage restrictions such as the exclusion of video or audio use. Equipment transmitting voice with analog modulation are excluded from the present document. The present document covers the essential requirements of

40、 article 3.2 of Directive 2014/53/EU i.2 under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to b

41、e publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the applicat

42、ion of the present document. ETSI ETSI EN 300 220-2 V3.1.1 (2017-02) 9 1 ETSI EN 300 220-1 (V3.1.1) (02-2017): “Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement“. 2.2 Informative references References are eit

43、her specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks

44、 included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 CEPT/ERC/REC 70-03:

45、“Relating to the use of Short Range Devices (SRD)“. NOTE: Available at http:/www.erodocdb.dk/docs/doc98/official/pdf/rec7003e.pdf. i.2 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making avai

46、lable on the market of radio equipment and repealing Directive 1999/5/EC. i.3 Commission Decision 2013/752/EU on harmonisation of the radio spectrum for use by short-range devices as amended by subsequent Commission Decisions. i.4 ETSI EG 203 336: “Electromagnetic compatibility and Radio spectrum Ma

47、tters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU“. i.5 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Ele

48、ctrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.6 ECC Report 200: “Co-existence studies for proposed SRD and RFID applications in the frequency band

49、 870-876 MHz and 915-921 MHz“. September 2013. i.7 Commission Decision 2000/299/EU: “Commission Decision of 6 April 2000 establishing the initial classification of radio equipment and telecommunications terminal equipment and associated identifiers (notified under document number C(2000) 938) (Text with EEA relevance)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in RE-Directive i.2, ETSI EN 300 220-1 1 and the following apply: dwell time: time pe