ETSI EN 300 239-2003 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Generic functional protocol for the support of supplementary services (V1 3 1 ISO_1.pdf

1、 ETSI EN 300 239 V1.3.1 (2003-06)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Inter-exchange signalling protocol;Generic functional protocol for the support ofsupplementary servicesISO/IEC 11582 (2002) modifiedETSI ETSI EN 300 239 V1.3.1 (2003-06) 2 Refere

2、nce REN/ECMA-00206 Keywords ISDN, PISN, QSIG, endorsement ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Import

3、ant notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the

4、Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Inform

5、ation on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The co

6、pyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currentl

7、y being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 239 V1.3.1 (2003-06) 3 Intellectual Property Rights IPRs essential or potentially essential to the present doc

8、ument may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect o

9、f ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the exis

10、tence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those of the Europe

11、an Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as developed by ITU-T a

12、nd conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document defines the signalling protocol for use at the Q reference point between two PINXs for the transport of protocol information as part of Supplementary Services and/or Additiona

13、l Network Features (ANFs) within a PISN. The protocol defined in the present document forms part of the PSS1 protocol (informally known as QSIG). The present document endorses an International Standard, ISO/IEC 11582. National transposition dates Date of adoption of this EN: 13 June 2003 Date of lat

14、est announcement of this EN (doa): 30 September 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2004 Date of withdrawal of any conflicting National Standard (dow): 31 March 2004 Endorsement notice The elements of International Standard ISO/IEC 115

15、82 (2002) apply, with the following modifications. ETSI ETSI EN 300 239 V1.3.1 (2003-06) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identif

16、ied by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might

17、 be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 21 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998), modified“. 22 ETSI EN 300 172: “Private Integrated Services Network (PISN); Inter-exchange

18、 signalling protocol; Circuit-mode basic services ISO/IEC 11572 (2000) modified“. 23 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modified“. 24 ETSI ETS 30

19、0 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 25 ETSI EN 301 048: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Transit counter additional net

20、work feature ISO/IEC 15056 (1997) modified“. Throughout the text of ISO/IEC 11582 Replace references as shown in the table below. Reference in ISO/IEC 11582 Modified reference ISO/IEC 11571 EN 300 189 21 ISO/IEC 11572 EN 300 172 22 ISO/IEC 11574 EN 300 171 23 ISO/IEC 11579-1 ETS 300 475-1 24 ISO/IEC

21、 15056 EN 301 048 25 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 300 239 V1.3.1 (2003-06) 5 History Document history Edition 1 June 1993 Publication as ETS 300 239 Edition 2 November 1995 Publication as ETS 300 239 V1.3.1 February 2003 One-step Approval Procedure OAP 20030613: 2003-02-12 to 2003-06-13 V1.3.1 June 2003 Publication