ETSI EN 300 258-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Path replacement additional network feature (V1 3 1 ISO IEC 138.pdf

1、 ETSI EN 300 258 V1.3.1 (2003-06)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Specification, functional model and information flows;Path replacement additional network featureISO/IEC 13863 (1998) modifiedETSI ETSI EN 300 258 V1.3.1 (2003-06) 2 Reference RE

2、N/ECMA-00238 Keywords ANF, endorsement, path replacement, PISN, stage 1, stage 2 ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grass

3、e (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the re

4、ference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or c

5、hange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by wri

6、tten permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo a

7、re Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 258 V1.3.1 (2003-06) 3 Intellectual Property Rights IPRs essential or potentially essen

8、tial to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notifi

9、ed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can

10、be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members

11、and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts

12、as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the Path Replacement additional network feature. The present document endorses an International Standard, ISO/IEC 13863. National transpositio

13、n dates Date of adoption of this EN: 13 June 2003 Date of latest announcement of this EN (doa): 30 September 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2004 Date of withdrawal of any conflicting National Standard (dow): 31 March 2004 Endorsem

14、ent notice The elements of International Standard ISO/IEC 13863 (1998) apply, with the following modifications. ETSI ETSI EN 300 258 V1.3.1 (2003-06) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of

15、the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not

16、found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 8 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998), modified“. 9 ETSI EN 300 171:

17、“Private Integrated Services Network (PISN); Specification, functional models and information flows; Control aspects of circuit-mode basic services ISO/IEC 11574 (1994) modified“. 10 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuratio

18、n for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 11 ETSI ETS 300 387 (1994): “Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services“. Throughout the text of ISO/IEC 13863 Replace references as shown in the table below: Reference in IS

19、O/IEC 13863 Modified reference ISO/IEC 11571 EN 300 189 8 ISO/IEC 11574 EN 300 171 9 ISO/IEC 11579-1 ETS 300 475-1 10 CCITT Rec. I.130 ETS 300 387 11 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 300 258 V1.3.1 (2003-06) 5 History Document history Edition 1 November 1993 Publication as ETS 300 258 Edition 2 May 1996 Publication as ETS 300 258 V1.3.1 February 2003 One-step Approval Procedure OAP 20030613: 2003-02-12 to 2003-06-13 V1.3.1 June 2003 Publication