ETSI EN 300 386-2016 Telecommunication network equipment ElectroMagnetic Compatibility (EMC) requirements Harmonised Standard covering the essential requirements of the Directive 2_1.pdf

1、 ETSI EN 300 386 V2.1.1 (2016-07) Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements; Harmonised Standard covering the essential requirements of the Directive 2014/30/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 300 386 V2.1.1 (2016-07) 2 Reference REN/ERM-EMC-330

2、Keywords EMC, harmonised standard, network, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important no

3、tice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authori

4、zation of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be

5、 aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the followin

6、g services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF vers

7、ion shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI regist

8、ered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 300 386 V2.1.1 (2016-07) 3 Contents Intellectu

9、al Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g31 Scope 7g32 References 8g32.1 Normative references . 8g32.2 Informative references 10g33 Definitions and abbreviations . 12g33.1 Definitions 12g33.2 Abbreviations . 15g34 Installation environment . 16g35 Immunity: test methods 16g35.0 G

10、eneral requirements . 16g35.1 Electrostatic discharge 17g35.2 Electrical fast transients/burst . 17g35.3 Surges . 17g35.3.1 Signal line ports 17g35.3.2 AC power ports . 17g35.4 Immunity to continuous conducted signals 17g35.4.1 Low frequency ( 150 kHz) 17g35.4.2 Radio frequency ( 150 kHz) . 17g35.4.

11、2.1 AC power port . 17g35.4.2.2 DC power port . 18g35.4.2.3 Signal line port 18g35.5 Immunity to radiated electromagnetic fields 18g35.6 Immunity to power supply disturbances: AC and DC power ports 18g35.6.1 Test of immunity to low frequency disturbances: AC power ports 18g35.6.2 Test of immunity to

12、 low frequency disturbances: DC power ports 18g36 Emission: test methods . 18g36.0 General . 18g36.1 AC power port 18g36.2 DC power port 19g36.3 Wired network and telecommunication Ports. 19g36.4 Radiated emission. 19g37 Test levels and limits 19g37.0 General requirements . 19g37.1 Emission . 20g37.

13、1.1 Enclosure port, Radiated electromagnetic field emissions 20g37.1.2 AC ports 20g37.1.2.1 Conducted emissions . 20g37.1.2.2 Current harmonics. 20g37.1.2.3 Voltage fluctuations 20g37.1.3 DC ports, Conducted emissions 20g37.1.4 Wired network or Telecommunication ports, Conducted emissions 20g37.2 Im

14、munity 21g37.2.1 Equipment operating in telecommunication centres . 21g37.2.1.1 Telecommunication centres, enclosure port 21g37.2.1.2 Telecommunication centres, ports for outdoor signal lines . 22g37.2.1.3 Telecommunication centres, ports for indoor signal lines . 23g37.2.1.4 Telecommunication centr

15、es, AC power ports . 24g37.2.1.5 Telecommunication centres, DC power ports . 24g37.2.2 Equipment operating in locations other than telecommunication centres . 25g3ETSI ETSI EN 300 386 V2.1.1 (2016-07) 4 7.2.2.1 Other than telecommunication centres, enclosure port . 25g37.2.2.2 Other than telecommuni

16、cation centres, ports for outdoor signal lines 26g37.2.2.3 Other than telecommunication centres, ports for indoor signal lines 27g37.2.2.4 Other than telecommunication centres, AC power ports . 28g37.2.2.5 Other than telecommunication centres, DC power ports . 29g38 General test configuration 30g39

17、General operational conditions during testing 30g39.0 General requirements . 30g39.1 Equipment configuration 30g39.2 Operation of multimedia network equipment . 31g310 General immunity conditions . 31g310.0 General . 31g310.1 General performance criteria 31g311 Switching equipment specific requireme

18、nts . 32g311.1 Test configuration. 32g311.2 Operational conditions . 33g311.2.0 General 33g311.2.1 Emission . 34g311.2.2 Immunity 34g311.3 Specific immunity performance criteria . 34g311.3.0 General 34g311.3.1 Digital port performance criteria 34g311.3.1.1 Performance criterion A (continuous phenome

19、na) 34g311.3.1.2 Performance criterion B (transient phenomena) 34g311.3.1.3 Performance criterion C (interruptions) 34g311.3.2 Analogue port performance criteria 34g311.3.2.1 Performance criterion A (continuous phenomena) 34g311.3.2.2 Performance criterion B (transient phenomena) 35g311.3.2.3 Perfor

20、mance criterion C (interruptions) 35g312 Transmission equipment specific requirements . 35g312.1 Test configuration. 35g312.2 Operational conditions . 36g312.2.0 General 36g312.2.1 Emission . 36g312.2.2 Immunity 36g312.3 Specific immunity performance criteria . 36g312.3.1 Digital signal ports 36g312

21、.3.1.0 General 36g312.3.1.1 Performance criterion A (continuous phenomena) 36g312.3.1.2 Performance criterion B (transient phenomena) 37g312.3.1.3 Performance criterion C (interruptions) 37g312.3.2 Analogue voice frequency signal ports . 37g312.3.2.0 General 37g312.3.2.1 Performance criterion A (con

22、tinuous phenomena) 37g312.3.2.2 Performance criterion B (transient phenomena) 37g312.3.3 SDH and PDH interfaces 37g312.3.3.1 Tributary and aggregate interfaces 37g312.3.4 ISDN interfaces 37g312.3.4.1 Primary rate access ISDN interfaces . 37g312.3.4.2 Network termination NT1 for ISDN “U“ interfaces 3

23、7g312.3.4.3 Basic access ISDN interfaces 38g312.3.5 Analogue interfaces 38g312.3.5.1 Trunk interfaces and leased line interfaces . 38g312.3.5.2 Subscriber interfaces . 38g312.3.6 V.10, V.11, V.24, V.28, V.36, X.24 and similar V.- and X.- series interfaces . 38g312.3.7 Ethernet and packet-data interf

24、aces 38g312.3.7.0 General 38g312.3.7.1 Performance criterion A (continuous phenomena) 38g312.3.7.2 Performance criterion B (transient phenomena) 38g3ETSI ETSI EN 300 386 V2.1.1 (2016-07) 5 12.3.8 Service and maintenance interfaces 38g312.3.9 Synchronization interfaces 38g312.3.9.0 General 38g312.3.9

25、.1 Performance criterion A (continuous phenomena) 39g312.3.9.2 Performance criterion B (transient phenomena) 39g312.3.10 Remote alarm interfaces . 39g312.3.10.0 General 39g312.3.10.1 Performance criterion A (continuous phenomena) 39g312.3.10.2 Performance criterion B (transient phenomena) 39g312.4 D

26、igital Subscriber Line (DSL) Access Systems . 39g312.4.1 Test configuration . 39g312.4.2 Operational conditions 40g312.4.3 Immunity 40g312.4.4 Specific Immunity performance criteria . 40g312.4.4.0 General 40g312.4.4.1 Performance Criteria A (continuous phenomena) . 40g312.4.4.2 Performance Criteria

27、B (transient phenomena) . 41g312.4.4.3 Performance Criteria C (interruptions) 41g313 Power supply equipment specific conditions . 41g313.0 General . 41g313.1 Test configuration. 41g313.2 Operational conditions . 42g313.2.1 Emission . 42g313.2.2 Immunity 42g313.3 Specific immunity performance criteri

28、a . 43g313.3.0 General 43g313.3.1 Alternating current secondary interface 43g313.3.1.1 Performance criterion A (continuous phenomena) 43g313.3.1.2 Performance criterion B (transient phenomena) 43g313.3.2 Direct current secondary interface 44g313.3.2.1 Performance criterion A (continuous phenomena) 4

29、4g313.3.2.2 Performance criterion B (transient phenomena) 44g313.3.3 Control/signal interface . 44g313.3.4 Tertiary supply interface . 44g314 Supervisory equipment specific conditions 44g314.1 Test configuration. 44g314.2 Operational conditions . 45g314.3 Specific immunity performance criteria . 45g

30、314.3.1 Performance criterion A (continuous phenomena) . 45g314.3.2 Performance criterion B (transient phenomena) . 46g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/30/EU . 47g3Annex B (normative): Surges: test method for ports of si

31、gnal lines remaining within the building . 48g3B.0 General . 48g3B.1 Test set-up for signal ports . 48g3Annex C (informative): Evaluation of test results . 50g3Annex D (informative): Guidance on EMC performance requirements and methods of measurement for RF ports (also covered by CENELEC EN 50083-2)

32、 of multimedia network equipment . 52g3Annex E (informative): Bibliography . 53g3History 54g3ETSI ETSI EN 300 386 V2.1.1 (2016-07) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essent

33、ial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates

34、are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server)

35、which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared to provide one voluntary means

36、of conforming to the essential requirements of Directive 2014/30/EU i.31 of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast). NOTE: The corresponding Commissions standardisation req

37、uest to provide one voluntary means of conforming to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) i.31 is expected shortly. Once the present document is cited in the Official Journal of the Eu

38、ropean Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regula

39、tions. National transposition dates Date of adoption of this EN: 6 June 2016 Date of latest announcement of this EN (doa): 30 September 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2017 Date of withdrawal of any conflicting National Standard (d

40、ow): 30 September 2017 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).

41、“must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 300 386 V2.1.1 (2016-07) 7 1 Scope The present document covers the EMC requirements for non-radio equipment intended to be used within a public telecommunications network, which provides tele

42、communications between Network Termination Points (NTPs) (i.e. excluding terminal equipment beyond the NTPs). Examples of such equipment are: Switching equipment. Such equipment includes: - local telephone exchanges; - remote switching concentrators; - international switches; - telex switches; - net

43、work packet switches; - base station controllers, radio network controllers; - network servers and gateways. Non-radio transmission equipment and ancillary equipment. Such equipment includes: - multiplexers; - line equipment and repeaters, e.g. equipment for: square4 Synchronous Digital Hierarchy (S

44、DH); square4 Plesiochronous Digital Hierarchy (PDH); square4 Asynchronous Transfer Mode (ATM); such as: square4 Digital Cross Connect systems; square4 network terminations; square4 transmission equipment used in the access network like xDSL. Power supply equipment. Such equipment includes: - central

45、 power plant; - end of suite power supplies; - uninterruptible power supplies; - stabilized AC power supplies; and - other dedicated telecommunication network power supplies; but excludes equipment which is uniquely associated with or integrated in other equipment. Supervisory equipment. Such equipm

46、ent includes: - network management equipment; - operator access maintenance equipment; - traffic measurement systems; - line test units; - functional test units. ETSI ETSI EN 300 386 V2.1.1 (2016-07) 8 NOTE: The function of supervision may either be performed by independent equipment or form part of

47、 other telecommunication network equipment. If the function of supervision forms part of a telecommunication network equipment, the performance may be evaluated simultaneously with other functions (such as switching and transmission) during EMC testing. Data centre equipment which is intended to be

48、used within telecommunication network infrastructure: - Storage. - Processor. - Server. The environmental classification locations used in the present document refers to ETSI TR 101 651 i.22. The requirements of the present document have been selected to ensure an adequate level of immunity for the

49、apparatus covered by the scope of the present document. The levels do not, however, cover extreme cases which may occur at any location but with a low probability of occurrence. In special cases, situations may arise where the levels of disturbance may exceed the immunity test levels specified in the present document. In these instances, special mitigation measures may have to be employed. General purpose equipment, which is used as a part of a telecommunication network, may be covered by the scope of other standards. For such equipment, if those other standa