ETSI EN 300 392-10-10-2002 Terrestial Trunked Radio (TETRA) Voice Plus Data (V+D) Part 10 Supplementary Services Stage 1 Sub-Part 10 Priority Call (PC) (V1 2 1)《陆地集群无线电(TETRA) 语音加数_1.pdf

1、ETSI EN 300 392-10-10 1.2.1 (2002-05) European Sfandard (Telecommunicafions series) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part IO: Supplementary services stage 1; Sub-part IO: Priority Call (PC) 2 ETSI EN 300 392-10-10 V1.2.1 (2002-05) Reference REN/TETRA-03001-10-10 Keywords dat

2、a, priority call, radio, speech, stage 1, supplementary service, TETRA, V+D ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (0

3、6) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/w.etsi.orq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the referen

4、ce version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change

5、 of status. Information on the current status of this and other ETSI documents is available at hp:l/partal.etsi.arltb/saslsaus.asp If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The cop

6、yright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currentl

7、y being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EN 300 392-10-10 V1.2.1 (2002-05) Contents Intellectual Property Rights 5 Foreword . 5 1 2 3 3.1 3.2 3.2.1 3.2.2 4

8、4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 Scope 7 References 7 Definitions and abbreviations . 7 Definitions 7 Abbreviations . 7 General abbreviations . 7 Supplementary service abbreviations 8 Supplementary Service Priority Call (SS-PC) stage 1 specification 8 4.2.2.1 4.2.2.1.1 4.2.2.1.2 4.2.2.1.3 4.2.2.1.4 4

9、.2.2.1.5 4.2.2.1.6 4.2.2.2 4.2.3 4.2.3.1 4.2.3.1.1 4.2.3.1.2 4.2.3.1.3 4.2.3.1.4 4.2.3.1.5 4.2.3.1.6 4.2.3.2 4.3 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.3.9 4.3.10 4.3.11 4.3.12 4.3.13 4.3.14 4.3.15 4.3.16 4.3.17 4.3.18 4.3.19 4.3.20 8 8 9 9 Provision. assignment and withdrawal 9 Normal pr

10、ocedures 9 Activation. deactivation. definition. registration. interrogation and cancellation 9 Activation and deactivation . 9 Remote activation and deactivation . 9 Definition . 9 Registration . 9 Interrogation 10 Cancellation . 10 Invocation and operation . 10 Exceptional procedures . 10 Activati

11、on. deactivation. definition . registration. interrogation and cancellation 10 Activation and deactivation . 10 Remote activation and deactivation . 10 Definition . 11 Registration . 11 Interrogation 11 Cancellation . 11 Invocation and operation . 11 Interactions with other supplementary services 11

12、 Calling Line Identification Presentation (SS-CLIP) . 11 Connected Line identification Presentation (SS-COLP) 11 Calling/Connected Line Identification Restriction (SS-CLIR) . 12 Call Report (SS-CR) . 12 Talking Party Identification (SS-TPI) . 12 Call Forwarding Unconditional (SS-CFU) . 12 Call Forwa

13、rding on Busy (SS-CFB) . 12 Call Forwarding on No Reply (S S-CFNRy) . 12 Call Forwarding on Not Reachable (SS-CFNRc) . 12 List Search Call (SS-LSC) 12 Call Authorized by Dispatcher (SS-CAD) 12 Short Number Addressing (SS-SNA) . 12 Area Selection (SS-AS) 12 Access Priority (SS-AP) . 12 Priority Call

14、(SS-PC) 12 Call Waiting (SS-CW) 13 Call HOLD (SS-HOL 13 Call Completion to Busy Subscriber (SS-CCBS) 13 Late Entry (SS-LE) 13 Transfer of Control 13 ETSI 4 ETSI EN 300 392-10-10 V1.2.1 (2002-05) 4.3.21 4.3.22 4.3.23 4.3.24 4.3.25 4.3.26 4.3.27 4.3.28 4.3.29 4.3.30 4.4 4.5 Pre-emptive Priority Call (

15、SS-PPC) 13 Include Call (SS-IC) . 13 Advice of Charge (SS-AOC) . 13 Barring of Outgoing Calls (SS-BOC) . 13 Barring of Incoming Calls (SS-BIC) 13 Discreet Listening (SS-DL) 13 Ambience Listening (SS-AL) . 13 Dynamic Group Number Assignment (SS.DGNA) 14 Call Completion on No Reply (SS-CCNR) 14 Call R

16、eTention (SS-CRT) . 14 Intenvorking considerations . 14 Overall SDL 15 Annex A (informative): Bibliography . 16 History 17 ETSI 5 ETSI EN 300 392-10-10 V1.2.1 (2002-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The in

17、formation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notijied to ETSI in respect of ETSI standards“, which is available from

18、the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on th

19、e ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The present document is part 10, sub-part 10 of a multi-part deliverable coverin

20、g Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“; EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “

21、Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage 1“; “Call identification“; “Call report“; “Talking Party Identification (TPI)“; “Call Forwarding (CF)“; “List Search Call (LSC)“; “Call Authorized by Dispatcher (CAD)“; “Short num

22、ber addressing“; “Area selection“; “Access priority“; Sub-part 10: “Priority Call (PC)“; Sub-part 11: “Call Waiting (CW)“; Sub-part 12: “Call Hold (CH)“; Sub-part 13 : “Call completion to busy subscriber“; Sub-part 14: “Late Entry (LE)“; ETSI 6 ETSI EN 300 392-10-10 V1.2.1 (2002-05) Sub-part 5: “Tra

23、nsfer of control“; Sub-part 6: “Pre-emptive priority call“; Sub-part 7: “Include Call (IC)“; Sub-part 18: “Barring of Outgoing Calls (BOC)“; Sub-part 19: “Barring of Incoming Calls (BIC)“; Sub-part 20: “Discreet Listening (DL)“; Sub-part 2 1 : “Ambience Listening (AL)“; Sub-part 22: “Dynamic Group N

24、umber Assignment (DGNA)“; Sub-part 23: “Call completion on no reply“; Sub-part 24: “Call Retention (CRT)“; EN 300 392-1 1: “Supplementary services stage 2“; EN 300 392-12: “Supplementary services stage 3“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-14: “Protocol Implementatio

25、n Conformance Statement (PICS) proforma specification“; TS 100 392-15: “TETRA frequency bands, duplex spacings and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TS 100 392-17: “TETRA V+D and DMO Release 1.1 specifications“. National transposition dates Date of adoption of this EN

26、: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 24 May 2002 3 1 August 2002 28 February 2003 28 February 2003 ETSI 7 ETSI EN 300 392-10-10 V1.2.1 (200

27、2-05) 1 Scope The present document defines the stage 1 specifications of the Supplementary Service Priority Call (SS-PC) for TETRA. Stage 1 is an overall service description from the users point of view but does not deal with the details of the human interface itself. The present document specifies

28、the service description of the supplementary service and the procedures to be expected with successful and unsuccessful outcomes. In addition the present document specifies the interactions with other TETRA supplementary services and interworking considerations. Charging principles shall be outside

29、the scope of the present document. The SS-PC enables a user to have preferential access to the network resources in the TETRA system. 2 Refe re nces The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either

30、specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. il ITU-T Recommendation Z. 100: “Specification and Description Language (SDL)“.

31、3 3.1 Definitions and abbreviations De fin it ions For the purposes of the present document the following terms and definitions apply: authorized user: user who is authorized to change the range of priority level of the served users calls priority level: pre-agreed value allocated to each mobile ITS

32、I or GTSI on a per call basis NOTE: It is used to determine priority access to network resources in the event of network congestion. served user: call originator 3.2 Abbreviations 3.2.1 General abbreviations For the purposes of the present document the following general abbreviations apply: GTSI Gro

33、up TETRA Subscriber Identity ISDN Integrated Services Digital Network ITSI Individual TETRA Subscriber Identity MS Mobile Station SDL ss Supplementary Service NOTE: (Functional) Specification and Description Language The abbreviation SS is only used when referring to a specific supplementary service

34、. ETSI 8 ETSI EN 300 392-10-10 V1.2.1 (2002-05) SwMI Switching and Management Infiastructure TETRA Trans-European Trunked RAdio 3.2.2 Su p p I e me n ta ry servi ce abbreviations For the purposes of the present document the following supplementary service abbreviations apply: SS-AL SS-AP SS-AS SS-BI

35、C SS-BOC SS-CAD SS-CCBS SS-CCNR SS-CFB S S-CFNRy S S-CFNRC SS-CFU ss-CLIP SS-CLIR ss-COLP SS-CR SS-CRT ss-cw SS-DGNA SS-DL SS-HOLD ss-IC SS-LE ss-LSC ss-PC ss-PPC SS-SNA SS-TPI Ambience Listening Access Priority Area Selection Barring of Incoming Calls Barring of Outgoing Calls Call Authorized by Di

36、spatcher Call Completion to Busy Subscriber Call Completion on No Reply Call Forwarding on Busy Call Forwarding on No Reply Call Forwarding on Not Reachable Call Forwarding Unconditional Calling Line Identification Presentation Calling/Connected Line Identification Restriction Connected Line identif

37、ication Presentation Call Report Call ReTention Call Waiting Dynamic Group Number Assignment Discreet Listening call HOLD Include Call Late Entry List Search Call Priority Call Pre-emptive Priority Call Short Number Addressing Talking Party Identification 4 Supplementary Service Priority Call (SS-PC

38、) stage 1 specification 4.1 Description 4.1.1 General description SS-PC allows the infiastructure to give priority access to network resources to calls which have been sent with priority status in times of congestion. The priority level shall not apply to the initial uplink access but shall apply to

39、 the resources across the infiastructure and to the radio link at the called user. The priority level shall be sent with the initial call set-up message, or the network may select a default level if the user has riot chosen a level, and the level may be indicated to the called user as part of normal

40、 call control information. In a typical scenario there may be eight priority levels, each one in turn giving an enhanced performance in times of network congestion. A call attempt that has been assigned a higher priority than another call attempt shall be given resources by the infrastructure in pre

41、ference to a call attempt with lower priority. The precise queuing procedure shall be an operator option. ETSI 9 ETSI EN 300 392-10-10 V1.2.1 (2002-05) The uses of priority level may be e.g.: - - to determine the priority of queuing for resources in the network; to indicate the importance of the inc

42、oming call to the called user. 4.1.2 Qualifications on applicability to telecommunication services This supplementary service shall be applicable to all TETRA circuit mode teleservices and to all TETRA circuit mode bearer services. 4.2 Procedures 4.2.1 Provision, assignment and withdrawal Provision

43、of SS-PC shall be by pre-arrangement with the service provider. System may withdraw the service temporarily or permanently at any time without further information. SS-PC shall be provided on a per TETRA number (ITSUGTSI) basis. For each ITSUGTSI, the supplementary service may be subscribed to for ev

44、ery basic service subscribed to at that ITSUGTSI or for only some of the basic services subscribed to at that ITSUGTSI. A user shall be provided with a range of priority levels within which he may select on a per call basis. The priority level ranges may be defined upon provision or the system may d

45、ownload priority values at any time for user ITSUGTSI. MS may support those assigned values. 4.2.2 Normal procedures 4.2.2.1 Activation, deactivation, defin ition, registration, interrogation and cancellation 4.2.2. I. 1 Activation and deactivation SS-PC shall be activated by the service provider up

46、on provision and deactivated upon withdrawal. The optional assignment may be used to activate and deactivate the priority levels upon assignment. The deactivation may force pre-defied priority values as set upon provision. 4.2.2.1.2 Remote activation and deactivation Void. 4.2.2.1.3 Definition As an

47、 implementation option, authorizedregistered users may dynamically define the priority level or priority level range for each registered ITSUGTSI. This process supplements the provision process, where the ITSIs shall be allocated a priority level range upon provision, and facilitates the “on line“ c

48、hange of priority level ranges. The defiied values are downloaded to the user MSs using assignment. 4.2.2.1.4 Registration As an implementation option authorized users, capable of defining andor remotely activating or deactivating the priority level or priority level range, shall be registered with

49、the applicable ITSUGTSI range. The registration is a part of provisioning. ETSI 10 ETSI EN 300 392-10-10 V1.2.1 (2002-05) 4.2.2.1.5 Interrogation The infrastructure may provide interrogation, which can be local, remote or both. If interrogation is provided, an SwMI shall support interrogation on a per number basis, e.g.: - activatedde-activated; - priority levels per service; - result of the interrogation; - assignment status; and - whether acknowledgement of the assignment is requested from the user. 4.2.2.1.6 Cancel lati on Shall not be applicable. 4.2.2.2 Invocation and ope