ETSI EN 300 392-11-16-2004 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 11 Supplementary services stage 2 Sub-part 16 Pre-emptive Priority Call (PPC) (V1 2 1)《陆地集群无.pdf

1、 ETSI EN 300 392-11-16 V1.2.1 (2004-09)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 11: Supplementary services stage 2;Sub-part 16: Pre-emptive Priority Call (PPC)ETSI ETSI EN 300 392-11-16 V1.2.1 (2004-09) 2 Reference REN/TETRA-03124 Key

2、words data, radio, speech, stage 2, supplementary service, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78

3、03/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference ver

4、sion is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of st

5、atus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notific

6、ation No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered fo

7、r the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-11-16 V1.2.1 (2004-09) 3

8、 Contents Intellectual Property Rights5 Foreword.5 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 Functional model8 4.1 Functional model description .8 4.2 Description of functional entities .10 4.2.1 User As FE, FE1 10 4.2.2 SS-PPC FE in the indiv

9、idual or group home SwMI, FE21.10 4.2.3 SS-PPC FE in the controlling SwMI, FE2111 4.2.4 SS-PPC FE in called user visited SwMI or participating SwMI, FE25 11 4.2.5 Authorized users FE, FE3 12 4.2.6 User Bs (called party) FE, FE5 12 4.2.7 User Cs (pre-empted party) FE, FE813 4.2.8 User Ds (remaining p

10、arty) FE, FE9 .13 4.3 Relationship of functional model to basic call functional model .13 5 Information flows.14 5.1 Definition of information flows14 5.1.1 Definition15 5.1.1.1 DEFINE 15 5.1.1.2 DEFINE-ACK.15 5.1.1.3 ASSIGN 16 5.1.1.4 ASSIGN-ACK 16 5.1.2 Activation/deactivation.16 5.1.2.1 ACTIVATE.

11、17 5.1.2.2 ACTIVATE-ACK.17 5.1.2.3 DEACTIVATE .17 5.1.2.4 DEACTIVATE-ACK17 5.1.3 Interrogation .18 5.1.3.1 INTERROGATE.18 5.1.3.2 INTERROGATE-ACK .18 5.1.4 Operation and invocation19 5.1.4.1 Pre-emption.19 5.1.4.1.1 General on pre-emption.19 5.2.4.1.2 Resource pre-emption19 5.2.4.1.3 Called User pre

12、-emption19 5.1.4.1.3.1 General on called user pre-emption .19 5.1.4.1.3.2 Individual SS-PPC call 20 5.1.4.1.3.3 Group SS-PPC call.20 5.1.4.2 Exceptional situations .21 5.1.4.3 PRIORITY1 21 5.1.4.4 PRIORITY2 21 5.1.4.5 IMPENDING-PRE-EMPTION.21 5.1.4.6 PRE-EMPTION 21 5.1.4.7 USER-PRE-EMPTED.22 5.1.5 I

13、nformation flows between different TETRA systems .22 5.2 Relationship of SS-PPC information flows to other information flows .22 5.3 Service primitives.22 5.4 Information flow sequences .23 5.4.1 Definition24 ETSI ETSI EN 300 392-11-16 V1.2.1 (2004-09) 4 5.4.1.1 Definition of SS-PPC when definition

14、is sent to user A24 5.4.1.2 Definition when authorized user is in visited system24 5.4.1.3 Definition when user A is in visited system25 5.4.2 Interrogation .26 5.4.3 Activation .26 5.4.4 Deactivation26 5.4.5 FE actions .27 5.4.5.1 FE actions of FE127 5.4.5.2 FE actions of FE2127 5.4.5.3 FE actions

15、of FE327 5.4.5.4 FE actions of FE2527 5.4.6 Operation of SS-PPC with pre-emption due to lack of resources .28 5.4.6.1 Operation of SS-PPC for individual call with resource pre-emption 28 5.4.6.2 Operation of SS-PPC for a group call with resource pre-emption 28 5.4.6.3 Operation of SS-PPC with resour

16、ce pre-emption of participants in a group call 30 5.4.7 Operation of SS-PPC with a called party that is pre-empted from an ongoing call30 5.4.7.1 SS-PPC call is an individual call.30 5.4.7.2 SS-PPC call is a group call31 5.4.8 Operation for SS-PPC call initiated over ISI 31 5.4.9 FE actions .31 5.4.

17、9.1 FE actions of FE131 5.4.9.2 FE actions of FE2132 5.4.9.3 FE actions of FE2532 5.4.9.4 FE actions of FE532 5.4.9.5 FE actions of FE832 6 Allocation of FEs to physical equipment .32 7 Interworking considerations.33 Annex A (informative): Change requests .34 History 35 ETSI ETSI EN 300 392-11-16 V1

18、.2.1 (2004-09) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Inte

19、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no inves

20、tigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standar

21、d (Telecommunications series) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The present document is part 11, sub-part 16 of a multi-part deliverable covering Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“;

22、 EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage

23、1“; EN 300 392-11: “Supplementary services stage 2“; Sub-part 1: “Call Identification (CI)“; Sub-part 2: “Call Report (CR)“; Sub-part 3: “Talking Party Identification (TPI)“; Sub-part 4: “Call Forwarding (CF)“; Sub-part 5: “List Search Call (LSC)“; Sub-part 6: “Call Authorized by Dispatcher (CAD)“;

24、Sub-part 7: “Short Number Addressing (SNA)“; Sub-part 8: “Area Selection (AS)“; Sub-part 9: “Access Priority (AP)“; Sub-part 10: “Priority Call (PC)“; Sub-part 11: “Call Waiting (CW)“; Sub-part 12: “Call Hold (HOLD)“; Sub-part 13: “Call Completion to Busy Subscriber (CCBS)“; ETSI ETSI EN 300 392-11-

25、16 V1.2.1 (2004-09) 6 Sub-part 14: “Late Entry (LE)“; Sub-part 16: “Pre-emptive Priority Call (PPC)“; Sub-part 17: “Include Call (IC)“; Sub-part 18: “Barring of Outgoing Calls (BOC)“; Sub-part 19: “Barring of Incoming Calls (BIC)“; Sub-part 20: “Discreet Listening (DL)“; Sub-part 21: “Ambience Liste

26、ning (AL)“; Sub-part 22: “Dynamic Group Number Assignment (DGNA)“; Sub-part 23: “Call Completion on No Reply (CCNR)“; Sub-part 24: “Call Retention (CRT)“; EN 300 392-12: “Supplementary services stage 3“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-14: “Protocol Implementation

27、Conformance Statement (PICS) proforma specification“; TS 100 392-15: “TETRA frequency bands, duplex spacings and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TS 100 392-17: “TETRA V+D and DMO Release 1.1 specifications“. NOTE: Part 13 (SDL) and part 14 (PICS) of this multi-part

28、are of status “historical“ and will not be updated according to this version of the standard. National transposition dates Date of adoption of this EN: 17 September 2004 Date of latest announcement of this EN (doa): 31 December 2004 Date of latest publication of new National Standard or endorsement

29、of this EN (dop/e): 30 June 2005 Date of withdrawal of any conflicting National Standard (dow): 30 June 2005 ETSI ETSI EN 300 392-11-16 V1.2.1 (2004-09) 7 1 Scope The present document defines the stage 2 specifications of the Supplementary Service Pre-emptive Priority Call (SS-PPC) for the TErrestri

30、al Trunked Radio (TETRA). SS-PPC enables a user to have preferential access to the network resources in a TETRA system in times of congestion including pre-emption of calls. SS-PPC is applicable for pre-emptive priorities including the emergency priority. SS-PPC includes the capability to pre-empt r

31、esources needed for higher priority calls and the capability to pre-empt users from ongoing calls in order to move them to higher priority calls. SS-PPC specifies the definition, activation, deactivation and interrogation for the usage of pre-emptive call priorities in the TETRA system. The Switchin

32、g and Management Infrastructure (SwMI) applies the SS-PPC priorities when it allocates the resources for calls. The SS-PPC operations are defined for the SwMI and for the Mobile Station (MS). SS-PPC is defined to subscribers of one TETRA system, but the subscribers may be located in several TETRA sy

33、stems and the information flows may be delivered over the Inter-System Interface (ISI). SS-PPC also is invoked for calls within one TETRA system or for calls that extend over ISI to several TETRA systems. Man-Machine Interface (MMI) and charging principles are outside the scope of the present docume

34、nt. Stage 2 describes the functional capabilities of the Supplementary Service introduced in stage 1 description. Stage 2 identifies the functional capabilities for the management and operation of the service in the SwMI and in the MS. Stage 2 describes also the information flows exchanged between t

35、hese entities and the flows sent over the ISI. NOTE: The stage 2 description is followed by the stage 3 description, which specifies the encoding rules for the information flows and process behaviour for the different entities in the SwMI and in the MS. 2 References The following documents contain p

36、rovisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific

37、reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI EN 300 392-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 2 ETSI EN

38、300 392-10-16: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 16: Pre-emptive Priority Call (PC)“. 3 ETSI EN 300 392-12-16: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: P

39、re-emptive Priority Call (PPC)“. 4 ETSI EN 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services“. 5 ETSI EN 300 392-3-3: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interf

40、ace (ISI); Sub-part 3: Additional Network Feature Group Call (ANF-ISIGC)“. ETSI ETSI EN 300 392-11-16 V1.2.1 (2004-09) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: authorized user: user who is authorized to def

41、ine, activate, deactivate and interrogate the SS-PPC emergency priority: highest pre-emptive priority pre-emption: exclusion of one or more parties from an ongoing service due to a SS-PPC operation for another service NOTE: The pre-emption is carried out due to the lack of resources or due to the ne

42、ed to join a called party to a higher priority pre-emptive call. The users may be warned of the impending pre-emption or indicated, if any party is pre-empted from the ongoing call. user A: calling party, the party that invokes or generates invocation of SS-PPC user B: called party in a call in whic

43、h SS-PPC is operated NOTE: The called user may be pre-empted user from another call. user C: pre-empted user, a user that is involved in a call, which is pre-empted due to lack of resources for a SS-PPC NOTE: There may be one, two or more pre-empted users in a pre-empted call. user D: remaining user

44、 or users in a call from which a user or users have been pre-emptied 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CC Call Control functional entity CCA Call Control functional entity Agent CRV Call Retention Value CMCE Circuit Mode Control Entity FE

45、Functional Entity ISI Inter-System Interface LS Line connected Station MMI Man-Machine Interface MS Mobile Station PDU Protocol Data Unit SS-PPC Supplementary Service Pre-emptive Priority Call SwMI Switching and Management Infrastructure 4 Functional model 4.1 Functional model description The functi

46、onal model describes the functional characteristics of the Functional Entities (FEs) involved in the management and operation of SS-PPC. The functional model shall comprise the following FEs: FE1 user As (calling partys) FE; FE21 SS-PPC FE in home SwMI or controlling SwMI; ETSI ETSI EN 300 392-11-16

47、 V1.2.1 (2004-09) 9 NOTE 1: During definition, activation, deactivation and interrogation request, FE21 may either be user As home SwMI or a group home SwMI. During invocation and operation, FE21 will be the controlling SwMI of the pre-emptive priority call that has been initiated. FE3 authorized us

48、ers FE; FE5 user Bs (called partys) FE; NOTE 2: Called party in a call in which SS-PPC is operated. The called user may be pre-empted party FE8 of another call either due to lack of resources or the user is pre-empted to be joined to the pre-emptive priority call. FE25 SS-PPC FE in user Bs SwMI; FE8

49、 user Cs (pre-empted partys) FE; NOTE 3: Pre-empted user, a user that is involved in a call which is pre-empted due to lack of resources. FE9 user Ds (remaining partys) FE; NOTE 4: Remaining user or users in a call from which a user or users have been pre-emptied. CC Call Control FE in SwMI. CCA Call Control Agent FE in MS/LS. NOTE 5: The above FEs has been numbered in accordance with EN 300 392-9 4. The following relationships shall exist between these FEs: ra between FE1 and FE21/FE25; rb between FE21 and FE25; rc between FE21 and FE3; rd bet