ETSI EN 300 392-12-6-2006 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 12 Supplementary services stage 3 Sub-part 6 Call Authorized by Dispatcher (CAD) (V1 3 1)《陆地集_1.pdf

1、 ETSI EN 300 392-12-6 V1.3.1 (2006-02)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 12: Supplementary services stage 3;Sub-part 6: Call Authorized by Dispatcher (CAD)ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 2 Reference REN/TETRA-03155 Ke

2、ywords air interface, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual cop

3、ies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format

4、(PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current stat

5、us of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced excep

6、t as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONT

7、Mand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 3 Contents Intellectual Property Rights

8、5 Foreword.5 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 SS-CAD overview8 4.1 Functional entities and communication routes .8 4.2 Protocol structure and protocol stack .9 5 SS-CAD service description.9 5.1 General .9 5.2 SS-CAD services offered

9、over the TNSS-SAP 9 5.2.1 ACCEPT response 10 5.2.2 ACCEPTED indication.10 5.2.3 ACTIVATE indication .10 5.2.4 ACTIVATE request10 5.2.5 CANCEL indication .10 5.2.6 DEACTIVATE indication 10 5.2.7 DEACTIVATE request.11 5.2.8 DEFINE indication .11 5.2.9 DEFINE request11 5.2.10 DIVERT response.12 5.2.11

10、DIVERTED indication .12 5.2.12 INTERCEPTED indication.12 5.2.13 INTERROGATE indication12 5.2.14 INTERROGATE request12 5.2.15 REJECTED indication13 5.2.16 REJECT response .13 5.2.17 REQUEST indication .13 5.3 Parameter description.14 6 SS-CAD protocol description.15 6.1 PDU descriptions15 6.1.1 ACCEP

11、T PDU16 6.1.2 ACCEPTED PDU.16 6.1.3 ACTIVATE PDU .16 6.1.4 ACTIVATE ACK PDU 17 6.1.5 CANCEL PDU .17 6.1.6 DEACTIVATE PDU 18 6.1.7 DEACTIVATE ACK PDU.18 6.1.8 DEFINE PDU .19 6.1.9 DEFINE ACK PDU19 6.1.10 DIVERT PDU.20 6.1.11 DIVERTED PDU .20 6.1.12 INTERCEPTED PDU.21 6.1.13 INTERROGATE PDU .21 6.1.14

12、 INTERROGATE ACK PDU 21 6.1.15 PROFILE and PROFILE ACK information elements 22 6.1.16 REJECT PDU .23 6.1.17 REJECTED PDU23 6.1.18 REQUEST PDU .23 6.2 Information element coding .24 6.2.1 Activation failure reason.24 ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 4 6.2.2 Activation result25 6.2.3 Activat

13、ion type25 6.2.4 Basic service restriction - called party 25 6.2.5 Basic service restriction - calling party.25 6.2.6 CAD PDU type element .25 6.2.7 Deactivation rejection reason26 6.2.8 Deactivation result 26 6.2.9 Definition failure reason .26 6.2.10 Definition result 27 6.2.11 Dispatcher address

14、type 27 6.2.12 Interception cause .27 6.2.13 Interception type .28 6.2.14 Interrogation failure reason.28 6.2.15 Interrogation result28 6.2.16 Multiple user mask28 6.2.17 Range type 28 6.2.18 Rejection cause .28 6.2.19 Restricted basic service.28 6.2.20 Restricted destination address type.29 6.2.21

15、Restricted destination external subscriber number .29 6.2.22 Restricted parties 29 6.2.23 Restricted source address type 29 6.2.24 Restricted user address type29 6.2.25 Type of restriction change 29 6.3 SS-CAD protocol states29 6.4 Protocol states for FE1 .30 6.4.1 Protocol states for FE231 6.4.2 Pr

16、otocol states for FE335 6.4.3 Protocol states for FE737 6.5 Procedures 39 6.5.1 General routing of SS information39 6.5.2 Procedures for FE1 .39 6.5.3 Procedures for FE2 .40 6.5.3.1 CAD invocation procedures40 6.5.3.2 Call authorization40 6.5.3.3 Activation/deactivation procedures.41 6.5.3.4 Definit

17、ion procedure .41 6.5.3.5 Interrogation procedure.41 6.5.4 Procedures for FE3 .41 6.5.5 Procedures for FE7 .42 6.5.5.1 Normal operation of FE7 42 6.5.5.2 Calling user A disconnects during interception.42 6.5.5.3 Activation/deactivation/definition/interrogation requests from the dispatcher .42 Annex

18、A (informative): Change requests .43 History 44 ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available

19、for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (ht

20、tp:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or m

21、ay become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Terrestrial Trunked Radio (TETRA). The present document is part 12, sub-part 6 of a multi-part deliverable covering the Terrestrial Trunked Radio (T

22、ETRA); Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“; EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operation“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392

23、-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage 1“; EN 300 392-11: “Supplementary services stage 2“; EN 300 392-12: “Supplementary services stage 3“; EN 300 392-12-1: “Call Identification (CI)“; ETS 300 392-12-2: “Call Rep

24、ort (CR)“; EN 300 392-12-3: “Talking Party Identification (TPI)“; EN 300 392-12-4: “Call Forwarding (CF)“; ETS 300 392-12-5: “List Search Call (LSC)“; EN 300 392-12-6: “Call Authorized by Dispatcher (CAD)“; ETS 300 392-12-7: “Short Number Addressing (SNA)“; EN 300 392-12-8: “Area Selection (AS)“; ET

25、S 300 392-12-9: “Access Priority (AP)“; EN 300 392-12-10: “Priority Call (PC)“; ETS 300 392-12-11: “Call Waiting (CW)“; EN 300 392-12-12: “Call Hold (HOLD)“; ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 6 ETS 300 392-12-13: “Call Completion to Busy Subscriber (CCBS)“; EN 300 392-12-14: “Late Entry (LE

26、)“; EN 300 392-12-16: “Pre-emptive Priority Call (PPC)“; EN 300 392-12-17: “Include Call (IC)“; EN 300 392-12-18: “Barring of Outgoing Calls (BOC)“; EN 300 392-12-19: “Barring of Incoming Calls (BIC)“; ETS 300 392-12-20: “Discreet Listening (DL)“; EN 300 392-12-21: “Ambience Listening (AL)“; EN 300

27、392-12-22: “Dynamic Group Number Assignment (DGNA)“; ETS 300 392-12-23: “Call Completion on No Reply (CCNR)“; ETS 300 392-12-24: “Call Retention (CRT)“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-14: “Protocol Implementation Conformance Statement (PICS) proforma specification

28、“; TS 100 392-15: “TETRA frequency bands, duplex spacing and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TR 100 392-17: “TETRA V+D and DMO specifications“; TS 100 392-18: “Air interface optimized applications“. NOTE: Part 10, sub-part 15 (Transfer of control), part 13 (SDL) and

29、 part 14 (PICS) of this multi-part deliverable are of status “historical“ and are not maintained. National transposition dates Date of adoption of this EN: 17 February 2006 Date of latest announcement of this EN (doa): 31 May 2006 Date of latest publication of new National Standard or endorsement of

30、 this EN (dop/e): 30 November 2006 Date of withdrawal of any conflicting National Standard (dow): 30 November 2006 ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 7 1 Scope The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the

31、Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392-10-6 2 and EN 300 392-11-6 3 respectively. Aspects relatin

32、g to all supplementary services are detailed in EN 300 392-9 6. Charging principles and the Man Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher. 2 References The follow

33、ing documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not app

34、ly. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ITU-T Recommendation Z.100: “Specification and Description Language (SDL)“. 2 ETSI EN 300 392-

35、10-6: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 6: Call Authorized by Dispatcher (CAD)“. 3 ETSI EN 300 392-11-6: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub-part 6: Call Aut

36、horized by Dispatcher (CAD)“. 4 ETSI EN 300 392-10-1: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 1: Call Identification (CI)“. 5 ETSI EN 300 392-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“

37、. 6 ETSI EN 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services“. 7 ETSI EN 300 392-3-2: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Addition

38、al Network Feature Individual Call (ANF-ISIIC)“. 8 ETSI EN 300 392-12-8: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 8: Area Selection (AS)“. ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 8 3 Definitions and abbreviations 3.1 Definitions

39、For the purposes of the present document, the following terms and definitions apply: authorized user: user who can make service definition NOTE: The authorized user can also activate/deactivate and interrogate the service. dispatcher: user to whom the request for authorization shall be directed to N

40、OTE: This user is also able to activate/deactivate SS-CAD for other users (individuals and groups) within his responsibility area and interrogate the activation status for these users. restricted user: user whose calls are forced to be authorized by a dispatcher before the call can proceed NOTE: The

41、 restricted user can be either the calling user (A) or the called user (B) or both. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ANF-ISIGC Additional Network Feature - Inter-System Interface Group Call ANF-ISISS Additional Network Feature - Inter-Sys

42、tem Interface Supplementary Service CAD Call Authorized by Dispatcher CC Call Control CMCE Circuit Mode Control Entity FE Functional Entity ISI Inter-System Interface LS Line Station MMI Man Machine Interface MS Mobile Station PDU Protocol Data Unit SAP Service Access Point SDL Specification and Des

43、cription Language SNA Short Number Address SS Supplementary Service NOTE: The abbreviation SS is only used when referring to a specific supplementary service. SS-COLP Supplementary Service - Connected Line Identification Presentation SSI Short Subscriber Identity SS-TPI Supplementary Service - Talki

44、ng Party Identification SwMI Switching and Management Infrastructure TETRA TErrestrial Trunked RAdio TSI TETRA Subscriber Identity V+D Voice plus Data 4 SS-CAD overview 4.1 Functional entities and communication routes The functional model for SS-CAD consists of Functional Entities FE1 to FE5 as defi

45、ned in EN 300 392-11-6 3, clause 4.1. These functional entities can, for one call, be located in different TETRA systems, refer to EN 300 392-11-6 3, clause 4. ETSI ETSI EN 300 392-12-6 V1.3.1 (2006-02) 9 4.2 Protocol structure and protocol stack SS-CAD PDUs shall be routed as specified in EN 300 39

46、2-9 6 (e.g. at the air interface in facility information elements for the call related SS-CAD PDUs and in U/D-FACILITY PDUs for the call unrelated SS-CAD PDUs, and using ANF-ISISS for conveying SS-CAD PDUs over the ISI). In addition some specific SS-CAD information elements have been included in the

47、 definition of some ANF-ISIIC and ANF-ISIGC PDUs. The present document is normative for the protocol architecture and user application Service Access Points (SAPs) within the MS/LS, but gives an informative description of the protocol within the SwMI. 5 SS-CAD service description 5.1 General This cl

48、ause describes the CAD specific services offered by the Circuit Mode Control Entity (CMCE) at the Supplementary Services Service Access Point (TNSS-SAP) of the TETRA Voice plus Data (V+D) layer 3 service boundary. The SS-CAD service access point may be used in conformance testing as a normative boun

49、dary in TETRA Mobile Stations (MSs) and TETRA Line Stations (LSs). NOTE 1: As the present document only deals with the SS-CAD all service primitives has been shown without a TNSS-CAD-prefix e.g. TNSS-CAD-ACTIVATE request is shortened to ACTIVATE request. NOTE 2: User application is the user of the supplementary service. 5.2 SS-CAD services offered over the TNSS-SAP The SS-CAD service primitives at the restricted user MS/LS (FE1) TNSS-SAP shall be: a) ACCEPTED indication; b) DIVERTED indication; c) REJECTED indication; d) INTERCEPTED indication.