ETSI EN 300 425-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Call intrusion supplementary service (V1 3 1 ISO IEC 14845 (199_1.pdf

1、 ETSI EN 300 425 V1.3.1 (2003-06)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Specification, functional model and information flows;Call intrusion supplementary serviceISO/IEC 14845 (1996) modifiedETSI ETSI EN 300 425 V1.3.1 (2003-06) 2 Reference REN/ECMA-

2、00247 Keywords endorsement, PISN, ISDN, stage 1, stage 2, supplementary service, VPN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de G

3、rasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, th

4、e reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision

5、or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by

6、 written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON lo

7、go are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 425 V1.3.1 (2003-06) 3 Intellectual Property Rights IPRs essential or potentially e

8、ssential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs no

9、tified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

10、can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its memb

11、ers and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) conce

12、pts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the Call Intrusion supplementary service. The present document endorses an International Standard, ISO/IEC 14845. National transposition d

13、ates Date of adoption of this EN: 13 June 2003 Date of latest announcement of this EN (doa): 30 September 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2004 Date of withdrawal of any conflicting National Standard (dow): 31 March 2004 Endorsement

14、 notice The elements of International Standard ISO/IEC 14845 (1996) apply, with the following modifications. ETSI ETSI EN 300 425 V1.3.1 (2003-06) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the

15、 present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not fou

16、nd to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 17 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998), modified“. 18 ETSI EN 300 171: “

17、Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modified“. 19 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configura

18、tion for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 20 ETSI EN 300 258: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Path replacement additional network feature ISO/IEC 13863 (1998) modified“. 21 ETSI EN 300 237: “Private Integrate

19、d Services Network (PISN); Specification, functional model and information flows; Name identification supplementary services ISO/IEC 13864 (1995) modified“. 22 ETSI ETS 300 260: “Private Integrated Services Network (PISN); Specification, functional models and information flows; Call transfer supplem

20、entary service“. 23 ETSI EN 300 365: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Call completion supplementary services ISO/IEC 13866 (1995) modified“. 24 ETSI ETS 300 256: “Private Integrated Services Network (PISN); Specification, functional

21、models and information flows; Diversion supplementary services“. 25 ETSI ETS 300 173: “Private Integrated Services Network (PISN); Specification, functional models and information flows; Identification supplementary services“. 26 ETSI EN 300 361: “Private Integrated Services Network (PISN); Specific

22、ation, functional model and information flows; Call offer supplementary service ISO/IEC 14841 (1996) modified“. 27 ETSI EN 300 363: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Do not disturb and do not disturb override supplementary services IS

23、O/IEC 14842 (1996) modified“. 28 ETSI ETS 300 387 (1994): “Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services“. ETSI ETSI EN 300 425 V1.3.1 (2003-06) 5 Throughout the text of ISO/IEC 14845 Replace references as shown in the table below. Referenc

24、e in ISO/IEC 14845 Modified reference ISO/IEC 11571 EN 300 189 17 ISO/IEC 11574 EN 300 171 18 ISO/IEC 11579-1 ETS 300 475-1 19 ISO/IEC 13863 EN 300 258 20 ISO/IEC 13864 EN 300 237 21 ISO/IEC 13865 ETS 300 260 22 ISO/IEC 13866 EN 300 365 23 ISO/IEC 13872 ETS 300 256 24 ISO/IEC 14136 ETS 300 173 25 IS

25、O/IEC 14841 EN 300 361 26 ISO/IEC 14842 EN 300 363 27 CCITT Rec. I.130 ETS 300 387 28 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 300 425 V1.3.1 (2003-06) 6 History Document history Edition 1 September 1995 Publication as ETS 300 425 V.1.2.1 March 1999 Publication V1.3.1 February 2003 One-step Approval Procedure OAP 20030613: 2003-02-12 to 2003-06-13 V1.3.1 June 2003 Publication