ETSI EN 300 443-1-2001 Broadband Integrated Services Digital Network (B-ISDN) Digital Subscriber Signalling System No Two (DSS2) Protocol B-ISDN User-Network Interface Layer 3 Spec_1.pdf

1、ETSI EN 300 443-1 2.0.1 (2001-03) European Standard (Telecommunications series) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic calI/bearer control; Part 1 : Protocol s

2、pecification ITU-T Recommendation Q.2931 (1 995), modified COPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services2 ETSI EN 300 443-1 V2.0.1 (2001 -03) Tt- Reference REN/SPAN-05143-1 Keywords basic, B-ISDN, broadband, DSS2, endorsement, ISDN, layer 3, proto

3、col, UNI ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present doc

4、ument can be downloaded from: present document may be made available in more than one electronic version or in print. In any case of existing perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall b

5、e the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available

6、 at :/.$./$/ If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Telecommunications St

7、andards Institute 2001. All rights reserved. ETSI COPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services3 ETSI EN 300 443-1 V2.0.1 (2001 -03) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declare

8、d to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is

9、 available from the ETSI Secretariat. Latest updates are available on the ETSI Web server ClattD:/www.etsP.c/iDr. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETS

10、I SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present docu

11、ment is part 1 of a multi-part deliverable covering the specification of the Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic callhearer control, as described below: Par

12、t 1: Part 2: Part 3: Part 4: “Protocol specification ITU-T Recommendation Q.2931(1995), modified“; Protocol Implementation Conformance Statement (PICS) proforma specification“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Informati

13、on for Testing (PIXIT) proforma specification for the user“; “Test Suite Structure and Test Purpose (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network“. Part 5: Part 6: National transposition dates Date of

14、adoption of this EN Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 23 February 2001 31 May 2001 30 November 2001 30 November 2001 Endorsement notice Th

15、e elements of ITU-T Recommendation Q.2931 (1995) and its amendments 1 91, 2 92, 3 93 and 4 94 apply, with the following modifications: NOTE: New or modified text is indicated using sidebars. In addition, underlining and/or strike out are used to highlight detailed modifications where necessary. ETSI

16、 COPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services4 ETSI EN 300 443-1 V2.0.1 (2001 -03) Clause 1 Replace clause 1 (excluding clauses 1.1 to 1.3) by: 1 Scope The present document specifies the stage three of on-demand connection-oriented release 1 basi

17、c telecommunication services for the pan-European Broadband Integrated Services Digital Network (B-ISDN) as provided at the TB reference point or coincident SB and TB reference point (as defined in ITU-T Recommendation 1.413) by means of the Digital Subscriber Signalling System No. two (DSS2) protoc

18、ol. Stage three identifies the protocol procedures and switching functions needed to support a telecommunications service (see ITU-T Recommendation I. 130 84). In addition, the present document specifies the protocol requirements at the TB reference point where the service is provided to the user vi

19、a a private B-ISDN. NOTE 1: Procedures at the TB reference point, to support the access of a private B-ISDN to the public B-ISDN, are not explicitly identified in the present document, however, some procedures are applicable only at the TB reference point. The present document also specifies the par

20、ticular features required to provide 64 kbids based circuit-mode ISDN services in B-ISDN and to support access interworking between B-ISDN and N-ISDN. A basic telecommunications service is a fundamental type of service. It forms the basis on which supplementary services may be added. NOTE 2: Specifi

21、c requirements of individual B-ISDN connection-oriented basic telecommunication services are not covered by the present document. Further parts of the present document provide the method of testing and detailed application specific requirements to determine conformance to the present document. The p

22、resent document is applicable to equipment supporting connection-oriented basic B-ISDN telecommunication services, to be attached at either side of a TB reference point or coincident SB and TB reference points when used as an access to the public B-ISDN. Clause 1 .I Replace the text of clausel. 1 by

23、: 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present documen t. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequ

24、ent revisions do not apply. For a non-specific reference, the latest version applies. NOTE: 1841 Reference numbers less than 84 appear in the endorsed IT-T recommendation. ITU-T Recommendation I. 130 (1988): “Method for the characterization of telecommunication services supported by an ISDN and netw

25、ork capabilities of an ISDN“. ETSI ETS 300 402-2: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification ITU-T Recommendation Q.921 (1993), modified“. 1851 ETSI COPYRIGHT European Telecommunic

26、ations Standards InstituteLicensed by Information Handling Services5 ETSI EN 300 443-1 V2.0.1 (2001 -03) ETSI EN 300 403-1: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:

27、 Protocol specification ITU-T Recommendation Q.931 (1993), modified“. ETSI ETS 300 436-1: “Broadband Integrated Services Digital Network (B-ISDN); Signalling ATM Adaptation Layer (SAAL,); Service Specific Connection Oriented Protocol (SSCOP); Part 1: Protocol specification ITU-T Recommendation Q.211

28、0 (1995), modified“. ETSI ETS 300 437-1: “Broadband Integrated Services Digital Network (B-ISDN); Signalling ATM Adaptation Layer (SAAL,); Service Specific Co-ordination Function (SSCF) for support of signalling at the User-Network Interface (UNI); Part 1: Specification of SSCF at UNI ITU-T Recommen

29、dation Q.2130 (1995), modified“. ETSI ETS 300 486-1: “Broadband Integrated Services Digital Network (B-ISDN); Meta-signalling protocol; Part 1: Protocol specification ITU-T Recommendation Q.2120 (1993, modified“. ETSI EN 301 068-1: “Broadband Integrated Services Digital Network (B-ISDN); Digital Sub

30、scriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication; Part 1 : Protocol specification ITU-T Recommendations Q.2961.1 (1995), Q.2961.2 (1997), Q.2961.3 (1997), Q.2961.4 (1997), modified “ . Amendment 1 to ITU-T Recomme

31、ndation Q.293 1 (1997): “Digital Subscriber Signalling System No. 2 - User-network interface (UNI) layer 3 specification for basic callkonnection control - Amendment 1“ Amendment 2 Corrigendum 1 (2000) to ITU-T Recommendation Q.293 1: “Digital Subscriber Signalling System No. 2 - User-network interf

32、ace (UNI) layer 3 specification for basic callkonnection control“. Amendment 3 to ITU-T Recommendation Q.2931 (1999): “User-network interface (UNI) layer 3 specification for basic callkonnection control“. Amendment 4 (1999) to ITU-T Recommendation Q.293 1: “Digital Subscriber Signalling System No. 2

33、 - User-network interface (UNI) layer 3 specification for basic callkonnection control“ ETSI EN 301 815-1 (Vl.l.1): “Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service Class and Parameters indication at call/connec

34、tion establishment; Part 1: Protocol specification ITU-T Recommendations Q.2965.1 (1999) and Q.2965.2 (1999), modified“. ETSI COPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services6 ETSI EN 300 443-1 V2.0.1 (2001 -03) Reference in ITU-T Recommendation Q.29

35、31 TU-T Recommendation Q.921 TU-T Recommendation Q.931 TU-T Recommendation Q.2110 TU-T Recommendation Q.2120 TU-T Recommendation Q.2130 TU-T Recommendation Q.2961.2 TU-T Recommendations Q.2965.1 and Q.2965.2 Throughout the text of ITU-T Recommendation Q.2931 and its amendments 1,2, 3 and 4: Replace

36、references as shown in the following table. Modified reference ITU-T Recommendation Q.921 as modified by ETS 300 402-2 85 ITU-T Recommendation Q.931 as modified by EN 300 403-1 86 ITU-T Recommendation Q.2110 as modified by ETS 300 436-1 87 ITU-T Recommendation Q.2120 as modified by ETS 300 486-1 89

37、ITU-T Recommendation Q.2130 as modified by ETS 300 437-1 88 ITU-T Recommendation Q.2961.2 as modified by EN 301 068-1 go ITU-T Recommendations Q.2965.1 and Q.2965.2 as modified by EN 301 815-1 95 13 Definitions and abbreviations Definitions and abbreviations are provided in clauses J.l and J.2, resp

38、ectively. Table 3-8/Q.2931, note 5 Add the following text to note 5: I The maximum length of this information element is 25 octets. Table 3-8/Q.2931, note 7 Add the following text to note 7: Not included in the network-to-user direction for basic call control, but may be included for some supplement

39、ary services. The maximum length of this information element is 26 octets. Table 3-8/Q.2931, note 8 Add the following text to note 8: Not included in the network-to-user direction for basic call control, but may be included for some supplementary services. Table 3-8/Q.2931, note 13 Replace note 13 b

40、y: NOTE 13:It is mandatory for the user to include the Broadband sending complete information element when en bloc sending procedures are used. On its receipt, the network shall apply the en bloc sending procedure. It is mandatory for the network to include the Broadband sending complete information

41、 element. If the Broadband sending complete information element is not included, the called user shall not apply the missing mandatory element error handling procedures. Table 3-1 9/Q.2931, note 2 Add the following text to note 2: I The maximum length of this information element is 25 octets. ETSI C

42、OPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services7 ETSI EN 300 443-1 V2.0.1 (2001 -03) Table 3-1 9/Q.2931 note 4 Add the following text to note 4: Not included in the network-to-user direction for basic call control, but may be included for some supple

43、mentary services. The maximum length of this information element is 26 octets. Table 3-1 9/Q.2931, note 5 Add the following text to note 5: Not included in the network-to-user direction for basic call control, but may be included for some supplementary services. Clause 4.5.6, second paragraph Insert

44、 the following note after the second paragraph: NOTE: When the user requires the use of end-to-end OAM F5 flows, it is recommended that this is declared explicitly within the OAM traffic descriptor information element (see clause 4.5.24) in order to enable the network to identify the actual user pla

45、ne information rates. Currently this is needed when the user expects the separate policing and shaping functions (when applied as a network option) of the user plane information flow and of the end-to-end user originated OAM F5 flow to be performed by the network. Other cases may be identified in th

46、e future. Clause 4.5.9, third paragraph: Insert after the third paragraph: Octet groups 5 (layer 1 id), 6 (layer 2 id) and 7 (layer 3 id) of the Broadband low layer information element are not position independent, but if present at all, shall be sent in the order as specified in figure 4-16/Q.2931.

47、 Clause 4.5.1 1, third paragraph Replace the third paragraph by: I The maximum length of this information element is 25 octets: Figure 4-1 8/Q.2931, note 2 Delete note 2 related to “NSAP address octets“. This field is not supported. Table 4-1 2/Q.2931, note 2 Replace note 2 by: NOTE 2: The type of n

48、umber “unknown“ is used when the user or the network have no knowledge of the type of number (e.g. international number, national number, etc.). In this case, the number digits field is organized according to the network dialling plan; e.g. prefix or escape digits might be present. Table 4-1 2/Q.293

49、1, “Addressing/numbering plan (octet 5)“ Change codepoint “O O 1 O“ to “reserved“ and delete the related note 9. Clause 4.5.1 3 Replace the second sentence by: I The maximum length of this information element is 26 octets. ETSI COPYRIGHT European Telecommunications Standards InstituteLicensed by Information Handling Services8 ETSI EN 300 443-1 V2.0.1 (2001 -03) Page 65, figure 4-20/Q.2931 Delete note 2 related to “NSAP address octets“. This field is not supported. Table 4-1 4/Q.2931, note 2 Replace note 2 by: NOTE 2: