ETSI EN 300 497-2-1999 Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) Test Case Library (TCL) Part 2 Abstract Test Suite (ATS) for Medium Access Control .pdf

1、STDgETSI EN 300 497-2-ENGL 1999 m 3400855 0444640 849 m i*r PLEASE NOTE This document is normally accompanied by a dislddisks when purchased in hardcopy. The disWdisks contain information which would be of no value as a hardcopy document. If you require a COPY of the diskldisks, please use the conta

2、ct information below for your request. When submitting your request, pleuse have thefullowing information vaihbe: Your company namdaccount number Originating orpnisation Document number US AiCanada Information Handling Services Te!: 800-447-3352 E-mail Outside USMCanada (Except the United Kingdom)

3、Information Handling Services E- mail cus tsvcai hs. coin Tel: i- L-303-790-0600 United Kingdom Technical indaes Ltd Te!: Fax: (O 1344) 404409, Custoiiier Support (O 1344) 40442 I, Customer Support In foml Common Interface (Ci); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium A

4、ccess Control (MAC) layer - Portable radio Termination (PT) STD-ETSI EN 300 477-2-ENGL 1979 W 3400855 0444b42 bLL = ETSI EN 300 497-2 V0.3.1 (1999-10) 2 Reference RENIDECT-040131-2 (410i0100.PDF) Keywords DECT, MAC, terminal, testing, ATS, TTCN ETSI Postai address F-O6921 Sophia Antipolis Cedex - FR

5、ANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Tel,: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association A but non lucratlenregistre A la Sous-Prfecture de Grasse (06) N 7803/88 Internet secretariatetsi.fr Individual copies of

6、this ETSI deliverable can be downloaded from http:llw.etsi.org If you find errors in the present document, send your comment to: editoretsi.fr Copyrght Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproductio

7、n in all media. Q European Telecommunications Standards Institute 1999. All rights reserved. ETSI 3 ETSI EN 300 497-2 V0.3.1 (1999-10) Contents Intellectual Property Rights 5 Foreword 5 1 2 3 3.1 3.2 4 4.1 4.2 5 6 6.1 6.1.1 6.1.1.1 6.1.1.2 6.1.1.3 6.1.1.4 6.1.1.5 6.1.1.6 6.1.1.7 6.1.1.8 6.1.1.9 6.1.

8、1.10 6.1.1.11 6.1.1.12 6.1.2 6.1.2A 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.5 6.1.3.6 6.2 6.2.1 6.2.2 6.2.3 Scope 6 References 6 Definitions and abbreviations 7 Definitions . 7 Abbreviations . 7 Abstract Test Method (ATM) 8 Description of ATM . 8 Test strategy . 9 ATS conventions (only applicabl

9、e for PTC LT-TC) 10 Untestable Test Purposes (TP) . 10 Naming conventions 10 Declarations part 10 General . 10 Test suite operations definition . 11 Test suite parameter declarations 11 Test case selection expression definition 11 Test suite constant declarations 11 Test suite variable declarations

10、. 11 Test case variable declarations . 11 Timer declarations 12 ASP type definitions . 12 PDU type definitions 12 Alias definitions 12 Constraints part 12 General . 12 Dynamic part 13 General . 13 Test Case (TC) identifier 13 Test step identifier 13 Default identifier . 13 Label identifier . 13 ATS

11、abbreviations . 14 Implementation conventions 14 Declaration part 14 Constraint part 15 Dynamic part 15 Co-ordination Message (CM) type definitions . 12 ETSI STD-ETSI EN 300 q97-2-ENGL 1999 I 3400855 0444b44 474 4 ETSI EN 300 497-2 V0.3.1 (1999-10) Annex A (normative): Abstract Test Suite (ATS). PTC

12、 LT-TC . 16 The TTCN Machine Processable form (TTCN.MP) . 16 General requirements . 17 B.2 Additional requirements . 17 Identification summary 19 C.2 ATS summary 19 A . 1 The TTCN Graphical form (TTCN.GR) 16 A.2 Annex B (normative): B . 1 Specification of PTC LT-MAC 17 Annex C (normative): C . 1 Par

13、tial PIXIT proforma for DECT MAC . 19 C.3 Test laboratory . 19 C.4 Client identification 20 C.5 SUT 20 C.6 C.6.1 Protocol identification 20 C.6.2 IUT information . 21 Annex D (normative): MAC 22 D . 1 Identification summary 22 D.1.1 Protocol conformance test report . 22 D.1.2 IUT identification 22 D

14、 . 1.3 Testing environment 23 D.1.4 Limits and reservation 23 D . 1.5 Comments 23 D.2 IUT Conformance status 24 D.3 Static conformance summary . 24 D.4 D.5 Static conformance review report 25 D.6 Test campaign report 25 D.7 Observations 26 Bibliography . 27 . Protocol layer information . 20 Protocol

15、 Conformance Test Report (PCTR) proforma for DECT Dynamic conformance summary 24 . History 28 ETSI STDmETSI. EN 300 497-2-ENGL 1999 3400855 0444645 320 m ETSI EN 300 497-2 V0.3.1 (1999-10) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been de

16、clared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: Yntellectual Property Rights (IPRs); Essential, orpotentialb Essential, IPRs not$ed to ETSI in respect of ETSI standards“, which is ava

17、ilable from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O0

18、0 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 2 of

19、a multi-part EN covering the Common Interface (CI) Test Case Library (TCL), as identified below: Part 1: Part 2: “Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Portable radio Termination (P

20、T)“; “Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TF) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer“; “Test Suite Structure (TSS) and Test Purposes (TP)

21、- Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination (PT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Fixed radio Termination (FT)“; “Abstract Test Suite (ATS) for Network (NWK) laye

22、r - Fixed radio Termination (FT)“. Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: National transposition dates Date of adoption of this EN: Date of latest announcement of the present document (doa): 17 September 1999 31 December 1999 Date of latest publication of new National Standard or en

23、dorsement of the present document (dop/e): 30 June 2000 Date of withdrawal of any conflicting National Standard (dow): 30 June 2000 ETSI 6 ETSI EN 300 497-2 V0.3.1 (1999-10) I Scope The present document contains the Abstract Test Suite (ATS) to test the DECT Portable Part (PP) Medium Access Control

24、(MAC) layer. The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers DECT equipment. This test specification contains the ATS specification for testing of the MAC

25、 layer at the Portable radio Termination (PT). The IS0 standard for the methodology of conformance testing (ISO/IEC 9646, parts 1 to 7 131 to 191) as well as the ETSI rules for conformance testing in ETS 300 406 8 are used as the basis for the test methodology. Test specifications for the Physical L

26、ayer (PHL) are provided in other DECT ENS. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of this ATS. Annex B provides the specification of the parallel test component LT-MAC. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of

27、 this ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of this ATS. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publicatio

28、n, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number.

29、111 EN 300 175- 1 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)“. EN 300 175-3: “Digital Enhanced Cordless Telecommunications (D

30、ECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. EN 300 1 75-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. EN 300 I 75-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Par

31、t 6: Identities and addressing“. EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. EN 300 175-8: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission“. ETS 300 406: “Me

32、thods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. Pl 31 r41 Pl FI 71 Pl ETSI STDOETSI EN 300 497-2-ENGL 1799 3400855 0444b47 LT3 II 7 ETSI EN 300 497-2 V0.3.1 (1999-10) 91 ETS 300 474 Parts 1 and 2: “Digital Enhanced Cor

33、dless Telecommunications (DECT); Generic Access Profile (GAP); Profile requirement list and profile specific Implementation Conformance Statement (ICs) proforma“. EN 300 497- 1 : “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI) Test Case Library (TCL); Part 1: Test Suite S

34、tructure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer“. EN 300 497-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI) Test Case Library (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC) layer“. ETR 141: “Methods for Testing and Speci

35、fication (MTS); Protocol and profile conformance testing specifications; The Tree and Tabular Combined Notation (TTCN) style guide“. ISO/IEC 9646-1 : “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part I : General concepts“. ISO/IEC 9646-2: “

36、Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite Specification“. ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Co

37、mbined Notation (TTCN)“. ISOiEC 9646-4: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization“. ISOiEC 9646-5: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5:

38、Requirements on test laboratories and clients for the Conformance Assessment process“. ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol Profile Test Specification“. ISO/IEC 9646-7: “Information technology - Open

39、 Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance statement“. POI 1111 WI 1131 1141 1151 1161 u71 1181 1191 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the definitions given in ISO/IEC 9646-1 13

40、 and EN 300 175-1 I apply. 3.2 Abbreviations For the purpose of the present document, the following abbreviations apply: ASP ATM ATS BI BO BV CA CM CP DECT DLC FT IUT Abstract Service Primitive Abstract Test Method Abstract Test Suite Invalid Behaviour Inopportune Behaviour Valid Behaviour Capabilit

41、y tests Co-ordination Message Co-ordination Point Digital Enhanced Cordless Telecommunication Data Link Control Fixed radio Termination Implementation Under Test ETSI STD-ETSI EN 300 497-2-ENGL 1999 = 3400855 0444b48 03T m LT MAC MTC PCO PDU PHL PICS PIXIT PT PTC SAP SUT TP TSS TTCN UT 8 ETSI EN 300

42、 497-2 V0.3.1 (199910) Lower Tester Medium Access Control Main Test Component Point of Control and Observation Protocol Data Unit Physical Layer Protocol Implementation Conformance Statement Protocol Implementation Extra Information for Testing Portable radio Termination Parallel Test Component Serv

43、ice Access Point System Under Test Test Purposes Test Suite Structure Tree and Tabular Combined Notation Upper Tester 4 Abstract Test Method (ATM) This clause describes the ATM used to test the DECT MAC layer protocol at the Portable radio Termination (PT). 4.1 Description of ATM . :Test System i Lo

44、wer Tester i System Under Test iC Main Test Component Figure 1: Remote test method, embedded variant ETSI STDOETSI EN 300 497-2-ENGL 1999 3400855 0444b49 T7b 9 ETSI EN 300 497-2 V0.3.1 (1999-10) A single-party testing concept is used, which consists of the following abstract testing functions: PCO:

45、CP-TC: CP-MAC: PTC LT-TC: the Point of Control and Observation (PCO) for MAC Layer testing is located at the D-Service Access Point -SAP) between the MAC layer and the Physical layer. All test events at the PCO are specified in terms of Physical Layer - Abstract Service Primitives (PHL-ASPS) (frame

46、number parameter added); Co-ordination Point Test Case (CPTC) is located between the Main Test Component (MTC) and Parallel Test Component (PTC) LT-TC in the test system. It is used for passing co-ordination messages between these two testing functions; Co-ordination Point MAC (CP-MAC) is located be

47、tween the MTC and PTC LT-MAC in the test system. It is equivalent to the PCO used for Data Link Control (DLC) layer testing in part 6 of the present document. All co-ordination messages at this CP are specified in terms of MAC-ASPS and DLC Protocol Data Units (DLC-PDUs); the Lower Tester Parallel Te

48、st Component LT-TC (PTC LT-TC) is located in the test system. It makes restricted use of the PCO by only observing the test events in both directions. It assigns preliminary verdicts (the MTC assigns the final verdict); NOTE: PTC LT-MAC: the Lower Tester Parallel Test Component LT-MAC (PTC LT-MAC) i

49、s located in the test system. This restricted use of the PCO is a non-ISOflEC 9646-2 141 application of the PCO. It provides indirect control and observation of the Implementation Under Test (IUT) during test execution, via the underlying service-provider. It does not assign any verdict; the Main Test Component (MTC) is located in the test system. It is responsible for creating and terminating the PTCs, managing the Co-ordination points CP-TC and CP-MAC, and computation of the final test case verdict; no explicit Upper Tester (UT) exists in the