ETSI EN 300 497-7-1999 Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) Test Case Library (TCL) Part 7 Abstract Test Suite (ATS) for Network (NWK) Layer - .pdf

1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo

2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790

3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence ETSI EN 300 497-7 V0.3.0 (1999-10) European Standard (Telecommunications series) Digital

4、Enhanced Cordless Telecommunications (DECT); Common Interface (Ci); Test Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination (PT) 2 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) Reference REN/DECT-040131-7 (41prOlOO.PDF) Keywords ATS, DECT, network, test

5、ing, TTCN, terminal ETSI Postai address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No 348 623 562 O0017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) No 7803/88 Tel.: +33 4 92 94 42 O

6、0 Fax: +33 4 93 65 47 16 Internet secretariatetsi.fr Individual copies of this ETSI deliverable can be downloaded from http:/www.etsi.org If you find errors in the present document, send your comment to: editoretsi.fr Important notice This ETSI deliverable may be made available in more than one elec

7、tronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference should be the printing on ETSI printers of the PDF version kept on a specific network drive wi

8、thin ETSI Secretariat. Coovriaht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1999. All rights reserved. ETSI 3 ETSI EN 300 497-7 V

9、0.3.0 (1 999-1 O) Contents Intellectual Property Rights . 5 Foreword 5 1 Scope 6 2 References . 6 3 3.1 3.2 4 4.1 4.2 4.2.1 4.2.2 4.3 Definitions and abbreviations 7 Definitions . 7 DECT abbreviations 7 Abstract Test Method (ATM) 9 ATM 9 DLC primitives 10 S-SAP primitives 10 B-SAP primitives . 13 TC

10、 execution sequence 13 5 Untestable Test Purposes (TP) 14 6 ATS conventions . 14 6.1 6.1.1 6.1.1.1 6.1.1.2 6.1.1.3 6.1.1.4 6.1.1.5 6.1.1.6 6.1.1.7 6.1.1.8 6.1.1.9 6.1.1.10 6.1.1.11 6.1.1.12 6.1.1.13 6.1.2 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.5 6.2 6.2.1 6.2.2 6.2.3 6.2.4 Naming conventions 14

11、 Declarations part 14 Test suite type. ASP and PDU type definitions 14 Test Suite Operations (TSO) definitions 15 Test suite selection expressions 15 Test Suite Parameter (TSP) declarations 15 Test Case Selection (TCS) expression definitions 15 Test Suite Constant (TSC) declarations 15 Test Suite Va

12、riable (TSV) declarations 16 Test Case Variable (TCV) declarations 16 Point of Control and Observation (PCO) declarations . 16 Timer declarations 16 ASP type definitions . 16 PDU type definitions 16 Alias definitions 17 Constraints part 17 Dynamic part 18 Test Case (TC) identifier 18 Default identif

13、ier . 19 General aspects . 19 ATS abbreviations 19 Implementation conventions 20 Declaration part 20 Constraint part 20 Dynamic part 20 Documentation . 21 Test Step (TS) identifier . 19 ETSI 4 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) Annex A (normative): A.l A.2 The TTCN Machine Processable form (TTCN.M

14、P) . 22 Annex B (normative): Partial PIXIT proforma . 23 B.l Identification summary 23 B.2 ATS summary 23 B.3 Test laboratory . 23 Abstract Test Suite (ATS) for NWK testing . 22 The TTCN Graphical form (TTCN.GR) . 22 B.4 Client identification . 23 B.5 SUT 24 B.6 B.6.1 Protocol identification . 24 B.

15、6.2 IUT information . 25 Annex C (normative): Protocol layer information . 24 Protocol Conformance Test Report (PCTR) proforma for DECT NWK . 30 C.l Identification summary 30 Protocol conformance test report . 30 C.1.3 Testing environment 30 Limits and reservation 31 C.1.5 Comments 31 C.2 IUT confor

16、mance status . 31 C.3 Static conformance summary . 31 C.4 Dynamic conformance summary . 32 C.5 Static conformance review report 32 C.6 Test campaign report . 33 C.7 Observations 36 Bibliography 37 History 38 C.l.l C.1.2 IUT identification 30 C . 1.4 ETSI 5 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) Intell

17、ectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: “Intellectual Property Rights (I

18、PRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has b

19、een carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been prod

20、uced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 7 of a multi-part EN covering the Common Interface (CI) Test Case Library (TCL), as identified below: Part 1: Part 2: Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: “Test Suite Structure (

21、TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and T

22、est Purposes (TP) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Terminatio

23、n (PT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Fixed radio Termination (FT)“; “Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination (FT)“. National transposition dates Date of adoption of this EN: Date of latest announcement of the present

24、document (doa): Date of latest publication of new National Standard or endorsement of the present document (dop/e): Date of withdrawal of any conflicting National Standard (dow): 17 September 1999 31 December 1999 30 June 2000 30 June 2000 ETSI 6 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) 1 Scope The pres

25、ent document contains the Abstract Test Suite (ATS) to test the Network (NWK) layer, Portable radio Termination (PT). The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different ma

26、nufacturers DECT equipment. This test specification contains the Abstract Test Suite for testing of the NWK layer at the PT. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646 parts 1 to 7 9 to 15) as well as the ETSI rules for conformance testing (protocol and profile conform

27、ance testing specifications, standardization methodology ETS 300 406 7) are used as basis for the test methodology. Test specifications for the Physical Layer (PHL) are provided in other DECT standards. Annex B provides the partial Protocol Implementation Extra Information for Testing (PIXIT) Profor

28、ma. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subseq

29、uent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 111 EN 300 175- 1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface

30、(CI); Part 1: Overview“. 121 EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. EN 300 175-6: “Digi

31、tal Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing“. EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. 131 141 15 1 161 ETS 300 497- 1 : “Digital Enhanced Cordless Telecommunic

32、ations (DECT); Common Interface (CI) Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer“. 171 ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization meth

33、odology“. 181 EN 300 444: “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP)“. Pl IS O/IEC 9646- 1 : “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 1: General concepts“. lo1 ISO/IEC 9646-2: “Information techn

34、ology; Open Systems Interconnection; Conformance testing methodology and framework; Part 2: Abstract Test Suite Specification“. ETSI 7 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) 11 11 ISO/IEC 9646-3: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part

35、 3: The Tree and Tabular Combined Notation (TTCN)“. I21 ISO/IEC 9646-4: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 4: Test realization“. U31 ISO/IEC 9646-5: “Information technology; Open Systems Interconnection; Conformance testing meth

36、odology and framework; Part 5: Requirements on test laboratories and clients for the Conformance Assessment process“. 1141 ISO/IEC 9646-6: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 6: Protocol Profile Test Specification“. U51 ISO/IEC 9

37、646-7: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework - Part 7: Implementation Conformance statement“. 161 ETR 141: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; The Tree and Tabular Combin

38、ed Notation (TTCN) style guide“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the definitions given in ISO/IEC 9646-1 9, ISO/IEC 9646-2 lo, EN 300 175-1 i, EN 300 175-5 3, EN 300 175-6 4 and EN 300 175-7 5 apply. 3.2 DECT abbreviations For the purposes of

39、 the present document, the following abbreviations apply: AC ASP ATS AU BI BO BV CA cc CH CI CR DECT DLC FT HP IC ID IPEI IPUI IUT IWU KA LC LE LO LR LT Authentication Code Abstract Service Primitive Abstract Test Suite Authentication Invalid Behaviour Inopportune Behaviour Valid Behaviour Capabilit

40、y Call Control Ciphering Call Information Call Release Digital Enhanced Cordless Telecommunications Data Link Control Fixed radio Termination Handover Procedure Incoming Call Identification International Portable Equipment Identity International Portable User Identity Implementation Under Test Inter

41、working Unit Key Allocation Link Control entity Connection oriented Link Establishment Location Connection oriented Link Release Lower Tester ETSI 8 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) MAC ME MM NWK oc PARK PCO PCTR PDU PHL PICS PIXIT PT RPN RS SUT TCS TCV TP TSC TS O TSP TSS TSV TTCN UT Medium Acc

42、ess Control Management Entity Mobility Management Network layer Outgoing Call Portable Access Rights Key Point of Control and Observation Protocol Conformance Test Report Protocol Data Unit Physical Layer Protocol Implementation Conformance Statement Protocol Implementation Extra Information for Tes

43、ting Portable radio Termination Radio Fixed Part Number Call Related Supplementary Services System Under Test Test Case Selection Test Case Variable Test Purposes Test Suite Constant Test Suite Operation Test Suite Parameter Test Suite Structure Test Suite Variable Tree and Tabular Combined Notation

44、 Upper Tes ter ETSI 9 ETSI EN 300 497-7 V0.3.0 (1 999-1 O) 4 Abstract Test Method (ATM) Clause 4 describes the ATM, the Point of Control and Observation (PCO) used to test the NWK layer of the PT 4.1 ATM Test System Prim itivec VK-PD SUT Portable Term inatio n . Figure 1 : Remote single layer test m

45、ethod embedded variant LT1: a lower tester (LT1) is located in a remote DECT test system. It controls and observes the behaviour of the Implementation Under Test (IUT). DSAP: a unique Data Link Control (DLC) SAP is defined at the DECT interface and used to exchange service data of the NWK protocol.

46、PCO: the PCO for Network Layer testing is located on the DSAP. All test events at the PCO are specified in terms of DLC Abstract Service Primitives (ASPS) and NWK Protocol Data Units (PDUs). Upper layers / tester: no explicit Upper Tester (UT) exists in the test system. However, the System Under Tes

47、t (SUT) needs to carry out some UL functions to achieve some effects of test Co-ordination procedures. Designing ATS, the capability of the Interworking Unit (IWU), such as PSTN, ISDN or GSM IWUs might be taken into account. An example of such controls could be to provoke restarting of the IUT throu

48、gh the Q interface. ETSI 10 ASP NAME DL-DATA-IND Parameter name data-link-endpoint-identifier message-unit ETSI EN 300 497-7 V0.3.0 (1 999-1 O) PCO TYPE COMMENTS S-SAP Service control information DATA-LINK-ENDPOINT-IDE EN 300 175-4 2, subclause 7.3.6 NTIFIER (INTEGER) PDU EN 300 175-4 2, subclause 8

49、.3.2.3 Type Comments EN 300 175-4 2, subclause 8.3.1 4.2 DLC primitives In subclause 4.2 the DSAP primitives are defined according to EN 300 175-4 2, subclause 8.3.2 (S-SAP primitives) and EN 300 175-4 2, subclause 8.3.3 (B-SAP primitives). ASP NAME DL-DATA-REQ 4.2.1 S-SAP primitives PCO TYPE COMMENTS S-SAP EN 300 175-4 2, subclause 8.3.2.3 Parameter name Table 2: DL-DATA-REQ primitive Type Comments message-unit NTIFIER (INTEGER) PDU EN 300 175-4 2, subclause 8.3.1 ASP NAME D L-E N CRY PT-CN F Parameter name