ETSI EN 300 497-8-1999 Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) Test Case Library (TCL) Part 8 Test Suite Structure (TSS) and Test Purposes (TP) - _1.pdf

1、STD-ETSI EN 300 497-8-ENGL L999 m 3400855 04458bL 222 m ETSI EN 300 497-8 V0.3.2 (1999-09) European Standard (Telecommunications series) Digital Enhanced Cordless Telecommunications (DECT); Common Interface (Ci); Test Case Library (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP) - Ne

2、twork (NWK) layer - Fixed radio Termination (FT) STDWETSI EN 300 497-8-ENGL 3999 3400855 0445862 Lb9 9 ETSI EN 300 497-8 V0.3.2 (1999-09) 2 Reference REN/DECT-040131-8 (41q001I.PDF) Keywords DECT, network, FT, testing, TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI

3、 standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.orgipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been camed out by ETSI. No guarantee can be given as to the existence of other IPRs n

4、ot referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present d

5、ocument is part 8 of a multi-part EN covering the Common Interface (CI) Test Case Library (TCL), as identified below: Part I: Part 2: Part 3: Part 4: Part 5: Part 6: “Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) for Medium Acces

6、s Control (MAC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer“

7、; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination (PT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Fixed radio Termination (FT

8、)“; “Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination (FT)“. Part 7: Part 8: Part 9: National transposition dates 1 Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop

9、/e): Date of withdrawal of any conflicting National Standard (dow): 27 August 1999 30 November 1999 31 May 2000 3 1 May 2000 ETSI 6 ETSI EN 300 497-8 V0.3.2 (1999-09) 1 Scope The present document contains the test specification for the Digital Enhanced Cordless Telecommunications (DECT) (EN 300 175

10、parts 1 to 8 i to 8). The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers DECT equipment. This test specification defines the Test Suite Structure (TSS) and T

11、est Purposes (TP) for testing of the Network (NWK) layer at the Fixed radio Termination (FT). The IS0 standard for the methodology of conformance testing (ISOIEC 9646-1 12) as well as the ETSI rules for conformance testing (ETS 300 406 9) are used as a basis for the test methodology. Test specificat

12、ions for the Physical layer (PHL) are provided in other DECT standards. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, ver

13、sion number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. EN 300 175-1 : “Digita

14、l Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)“. EN 300 175-3: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI)

15、; Part 3: Medium Access Control (MAC) layer“. EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. EN

16、 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing“. EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. EN 300 175-8: “Digital Enhanced Cordless Telecommunicati

17、ons (DECT); Common Interface (CI); Part 8: Speech coding and transmission“. ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. EN 300 444: “Digital Enhanced Cordless Telecommunications (DECT); Generic Acce

18、ss Profile (GAP)“. EN 300 824: “Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal Mobility (CTM), CTM Access Profile (CAP)“. ETSI STD*ETSI EN 30II 497-B-ENGL Lqqq 3400855 04458b7 740 7 ETSI EN 300 497-8 V0.3.2 (1999-09) u21 ISO/IEC 9646- 1: “Information technology; Open Systems

19、Interconnection; Conformance testing methodology and framework; Part 1 : General concepts“. ISO/IEC 9646-2: “Information technology; Open Systems Interconnection; Conformance testing methodology and framework; Part 2: Abstract Test Suite Specification“. u31 3 Definitions and abbreviations 3.1 Defini

20、tions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 12, ISOIEC 9646-2 13, EN 300 175-1 i, EN 300 175-5 5, EN 300 175-6 6 andEN 300 175-7 7 apply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: AC AR AU BI B

21、O BV CA cc CI CISS CLMS COMS CR DECT FT HP IC ID IPUI IUT KA LC LE LL LO LR LS LT ME MM MO NWK oc PARK PDU PHL PICS PIXIT PM PR Authentication Code Access Rights Authentication Invalid Behaviour Inopportune Behaviour Valid Behaviour Capability Call Control Call Information Call Independent Supplemen

22、tary Services Connectionless Message Services Connection Oriented Message SeMces Call Release Digital Enhanced Cordless Telecommunications Fixed radio Termination Handover Procedure Incoming Call Identification International Portable User Identity Implementation Under Test Key Allocation Link Contro

23、l Connection oriented Link Establishment Connectionless Link control Location Connection oriented Link Release Connection oriented Link Suspend and resume Lower Tester Management Entity Mobility Management Connection Oriented Message Services Network layer Outgoing Call Portable Access Rights Key Pr

24、otocol Data Unit Physical layer Protocol Implementation Conformance Statement Protocol Implementation Extra Information for Testing Packet Mode Parameter Retrieval ETSI STDmETSI, EN 300 497-8-ENGL 1999 = 3ii00855 04458b8 b87 8 PT Portable radio termination RS Call Related Supplementary Services sc S

25、ervice Change TP Test Purposes TSS Test Suite Structure TTCN UAK User Authentication Key Tree and Tabular Combined Notation ETSI EN 300 497-8 V0.3.2 (199949) ETSI 4 Test Suite Structure (TSS) 4. I TSS overview FT - - cc - IT CA BV - BO BI TI - MM 1 IT r CA BV - BO BI TI - ME TU oc IC CI CR sc PM RS

26、HP ID AU LO AR KA PR CH I HP LL -IS BV -MO -CL BV Figure 1: TSS ETSI STD-ETSI EN 300 497-8-ENGL L999 3400855 0445870 235 w 10 ETSI EN 300 497-8 V0.3.2 (1999-09) 4.2 Test groups 4.2. I Protocol groups 4.2.1.1 Call Control (CC) Reference: EN 300 175-5 5, subclause 5.2, clause 9 and subclause 15.7. 4.2

27、.1.2 Mobility Management (MM) Reference: EN 300 175-5 SI, subclause 5.6, clause 13 and subclause 15.7. 4.2. I .3 Lower layer Management Entity (ME) Reference: EN 300 175-5 SI, clause 15. 4.2.1.4 Link Control (LC) Reference: EN 300 175-5 5, subclause 5.7 and clause 14. 4.2.1.5 Call Independent Supple

28、mentary Services (CISS) Reference: EN 300 175-5 SI, subclauses 5.3 and 10.4.2.2. 4.2.1.6 Connection Oriented Message Services (COMS) Reference: EN 300 175-5 5, subclause 5.4 and clause 11. 4.2.1.7 Connectionless Message Services (CLMS) Reference: EN 300 175-5 5, subclause 5.5 and clause 12. 4.2.2 Ma

29、in test groups 4.2.2.1 Basic Interconnection tests (IT) IT tests provide limited testing of an Implementation Under Test (IUT) in order to establish that there is sufficient conformance for possible interconnection without trying to perform thorough testing. In particular, only those test cases will

30、 be executed which will assure the sufficient interconnection between the IUT of the NWK layer and the test system exists, so that the rest of the test cases can then be put into execution. 4.2.2.2 Capability tests (CA) CA tests provide limited testing that the observable capabilities of the IUT are

31、 in accordance with the static conformance requirements and the additional capabilities claimed in the Protocol Implementation Conformance Statement / Protocol Implementation Extra Information for Testing (PICSPIXIT). In particular, this test group can be regarded as a set of spot checks for all the

32、 capabilities of the IUT stated in the PICSPIXIT. Scope of the test group is the observable capabilities of the IUT with respect to NWK layer connection, call control, and the mobility management. 4.2.2.3 Valid Behaviour tests (BV) BV group tests an IUT in response to valid behaviour of the test sys

33、tem. “Valid“ means that a test event is syntactically and contextually correct. All test cases in the valid behaviour group are intended to verifi as thoroughly as possible the various functions of the protocol. E TSI 11 ET51 EN 300 497-8 V0.3.2 (1999-09) TP Id: Reference: Condition: Stimulus: Expec

34、ted behaviour: 4.2.2.4 Invalid Behaviour tests (BI) BI group is intended to veri% that the IUT is able to react properly in case an invalid protocol data unit (message) occurring. Invalid Protocol Data Unit (PDU) here means syntactically or semantically invalid test events generated by the test syst

35、em. A syntactically or semantically invalid test event regardless of the current state is not allowed. Expected behaviour The TP Id is a unique identifier it shall be specified according to the TP naming conventions defined in the subclause below. The reference should contain the references of the s

36、ubject to be validated by the actual TF (specification reference, clause, paragraph). The condition defines in which initial state the IUT has to be to apply the actual TP. The stimulus defines the test event to which the TP is related. Definition of the events that are expected from the IUT to conf

37、orm to the base specification 4.2.2.5 Inopportune Behaviour tests (BO) BO test group is intended to verify that the IUT is able to react properly in case an inopportune test event occumng. Such an event is syntactically correct, but occurs when it is not allowed. 4.2.2.6 Timer expiry and counter mis

38、match tests (TI) Different timers and counters are defined to supervise the various state transitions. This test subgroup is intended to verify that the IUT is reacting properly to an expiry of one of the timers or counters mismatch. 5 Test Purposes (TP) Each test case is allocated directly under a

39、defined TP. 5.1 Introduction 5.1. I TP definition conventions The TP are defined following particular rules as shown in table 1 Table 1 : TP definition rules TP Id according to the T naming conventions Reference initial condition Stimulus 5.1.2 References This subclause defines the use of references

40、 given in the TP. The structure provides the interrelationship with: - - the source EN giving the clause / subclause reference; and the profile EN giving the clause / subclause reference. STD=ETSI EN 300 497-8-ENGL It999 3400855 0445872 008 m pn = sequential number 12 ETSI EN 300 497-8 V0.3.2 (1999-

41、09) 5.1.3 TP naming conventions The identifier of the TP is built according to table 2. Table 2: TP naming convention TPlllcxls/ cri =type of radio termination = functional module s =test subgroup FT I Fixed radio Termination CC Icaii Control MM ME LC IS MO CL IT CA BV BO BI TI oc IC CI CR sc PM RS

42、HP ID AU LO AR KA PR CH LE LR LS LL (O1 -99) 5.2 CC test purposes Test group objectives: To check the behaviour of the CC module of the IUT. Subgroups: - IT; - CA; - BV; - BO; - BI; - TI. Mobility Management Lower Layer Management Entity Link Control Entity Call Independent Supplementary Services Co

43、nnection Oriented Message Service Connectionless Message Service Basic Interconnection Tests Capability Tests Valid Behaviour Tests Inopportune Behaviour Tests Invalid Behaviour Tests Timer expiry and counter mismatch tests Outgoing Call establishment Incoming Call establishment Call Information Cal

44、l Release Service Change Packet Mode Call Related Supplementary services Handover Procedure Identification Authentication Location Access Rights Key Allocation Parameter Retrieval Ciphering Connection oriented Link Establishment Connection oriented Link Release Connection oriented Link Suspend and r

45、esume Connectionless Link control Test Purpose Number ETSI STD-ETSI EN 300 497-8-ENGL 1799 3400855 0445873 T44 E 13 ETSI EN 300 497-8 V0.3.2 (1999-09) 5.2.1 CC/IT test purposes There are no test purposes defined for this group in the present document. 5.2.2 CCICA test purposes There are no test purp

46、oses defined for this group in the present document. 5.2.3 CC/BV test purposes Subgroups: - oc; - IC; - CI; - CR - sc; - PM; - RS; - HP. ETSI STDeETSI EN 300 497-8-ENGL 1999 3400855 0445874 980 I ETSI EN 300 497-8 V0.3.2 (1999-09) 14 TPIFTICCIBVIOC-O1 TPIFTICCIBVIOC-02 5.2.3.1 CC/BV/OC test purposes

47、 Test subgroup objectives: To check the IUTs behaviours to setup an outgoing call. Test purposes: EN 300 175-5 5, subclause 9.3.1.4 - subclause 9.3.1.6 EN 300 444 lo, subclause 8.1, figure 1 Initial state: F-O0 Verify that the IUT is able to perform a CC-state transition from state F-O0 to state F-I

48、C for an outgoing normal call, using the piece-wise method to transfer dialling information EN 300 175-5 5, subclause 9.3.1.4 - subclause 9.3.1.6 Initial state: F-O0 Verify that the IUT is able to perform a CC-state transition from state F-O0 to state F-IO Existing TCL test DECT/T (98) 17 p.14 TPIFT

49、ICCIBVIOC-04 Existing TCL test DECT/T (98) 17 p.14 TPIFTICCIBVIOC-05 lfor an outgoing normal call set-up with en-block dialling in CC-SETUP message. TPIFTICCIBVIOC-O3 ICAP feature N.2 EN 300 175-5 5, subclause 9.3.1 EN 300 824 I I, subclause 7.2, table 1 Initial state: F-O0 Verify that the IUT is able, prior to subscription, to perform a CC-state transition from state F-O0 to state F-10 for an outgoing emergency call Set-up. CAP feature N.2 EN 300 175-5 5, subclause 9.3.1 EN 300 824 ll, subclause 7.2, table 1 Initial state: F-O0 Verif