ETSI EN 300 904-1999 Digital Cellular Telecommunications System (Phase 2+) Bearer Services (BS) Supported by GSM Public Land Mobile Network (PLMN) (GSM 02 02 Version 7 0 2 Release .pdf

1、ETSI EN 300 904 V7.0.2 (1999-12)European Standard (Telecommunications series)Digital cellular telecommunications system (Phase 2+);Bearer Services (BS) supported by a GSMPublic Land Mobile Network (PLMN)(GSM 02.02 version 7.0.2 Release 1998)GLOBAL SYSTEM FORMOBILE COMMUNICATIONSRETSIETSI EN 300 904

2、V7.0.2 (1999-12)2(GSM 02.02 version 7.0.2 Release 1998)ReferenceDEN/SMG-010202Q7KeywordsDigital cellular telecommunications system,Global System for Mobile communications (GSM)ETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - F

3、RANCETel.:+33492944200 Fax:+33493654716Siret N 348 623 562 00017 - NAF 742 CAssociation but non lucratif enregistre laSous-Prfecture de Grasse (06) N 7803/88Internetsecretariatetsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp:/www.etsi.orgIf you find errors in the present d

4、ocument, send yourcomment to: editoretsi.frImportant noticeThis ETSI deliverable may be made available in more than one electronic version or in print. In any case of existing orperceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).In cas

5、e of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific networkdrive within ETSI Secretariat.Copyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction

6、in all media. European Telecommunications Standards Institute 1999.All rights reserved.ETSIETSI EN 300 904 V7.0.2 (1999-12)3(GSM 02.02 version 7.0.2 Release 1998)ContentsIntellectual Property Rights4Foreword.40 Scope 50.1 References 50.2 Abbreviations .61 Framework for defining Bearer Services .62 B

7、earer Service categories.83 Bearer Services.93.1 General bearer service user data characteristics .113.1.1 3,1 kHz Audio.113.1.2 V.110 UDI 113.1.3 X.31 Flag Stuffing UDI 123.1.4 V.120 123.1.5 Bit Transparent Mode.12Annex A (informative): Change history .13History 14ETSIETSI EN 300 904 V7.0.2 (1999-1

8、2)4(GSM 02.02 version 7.0.2 Release 1998)Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin S

9、R 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server(http:/www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no inve

10、stigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telec

11、ommunications series) has been produced by the Special Mobile Group (SMG).The present document defines a set of Bearer Services to be provided within the digital cellular telecommunicationssystem.The contents of the present document is subject to continuing work within SMG and may change following f

12、ormal SMGapproval. Should SMG modify the contents of the present document it will be re-released with an identifying change ofrelease date and an increase in version number as follows:Version 7.x.ywhere:7 indicates Release 1998 of GSM Phase 2+x the second digit is incremented for all changes of subs

13、tance, i.e. technical enhancements, corrections, updates,etc.y the third digit is incremented when editorial only changes have been incorporated in the specification.National transposition datesDate of adoption of this EN: 3 December 1999Date of latest announcement of this EN (doa): 31 March 2000Dat

14、e of latest publication of new National Standardor endorsement of this EN (dop/e): 30 September 2000Date of withdrawal of any conflicting National Standard (dow): 30 September 2000The specification from which the present document has been derived was originally based on CEPT documentation,hence the

15、presentation of the present document may not be entirely in accordance with the ETSI drafting rules.ETSIETSI EN 300 904 V7.0.2 (1999-12)5(GSM 02.02 version 7.0.2 Release 1998)0 ScopeThe present document defines a set of Bearer Services to be provided to GSM PLMN subscribers by a GSM PLMNitself and i

16、n connection with other networks. The present document should also be used as a reference for defining thecorresponding required mobile network capabilities which are specified by means of the “GSM PLMN connection type“concept, defined in GSM 03.10 4.The recommended provision of the Bearer Services

17、is under the control of the GSM MoU and is out of the scope ofETSI TC-SMG.Bearer Services not included in the present document that require modifications to the GSM signalling specificationsshould not be introduced unilaterally by a mobile network operator.0.1 ReferencesThe following documents conta

18、in provisions which, through reference in this text, constitute provisions of the presentdocument. References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific. For a specific reference, subsequent revisions do not apply. For a non-specific

19、reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber. For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y).1 GSM 01.04 (ETR 350): “Digital c

20、ellular telecommunications system (Phase 2+); Abbreviationsand acronyms“.2 GSM 02.01: “Digital cellular telecommunications system (Phase 2+); Principles oftelecommunication services supported by a GSM Public Land Mobile Network (PLMN)“.3 GSM 02.04 (ETS 300 918): “Digital cellular telecommunications

21、system (Phase 2+); General onsupplementary services“.4 GSM 03.10: “Digital cellular telecommunications system (Phase 2+); GSM Public Land MobileNetwork (PLMN) connection types“.5 GSM 04.02: “Digital cellular telecommunications system (Phase 2+); GSM Public Land MobileNetwork (PLMN) access reference

22、configuration“.6 GSM 07.01 (ETS 300 913): “Digital cellular telecommunications system (Phase 2+); General onTerminal Adaptation Functions (TAF) for Mobile Stations (MS)“.7 GSM 07.02 (ETS 300 914): “Digital cellular telecommunications system (Phase 2+); TerminalAdaptation Functions (TAF) for services

23、 using asynchronous bearer capabilities“.8 GSM 07.03 (ETS 300 915): “Digital cellular telecommunications system (Phase 2+); TerminalAdaptation Functions (TAF) for services using synchronous bearer capabilities“.9 GSM 07.05: “Digital cellular telecommunications system (Phase 2+); Use of Data Terminal

24、Equipment - Data Circuit terminating Equipment (DTE - DCE) interface for Short MessageService (SMS) and Cell Broadcast Service (CBS)“.10 GSM 09.02 (ETS 300 974): “Digital cellular telecommunications system (Phase 2+); MobileApplication Part (MAP) specification“.ETSIETSI EN 300 904 V7.0.2 (1999-12)6(

25、GSM 02.02 version 7.0.2 Release 1998)11 GSM 09.03: “Digital cellular telecommunications system; Signalling requirements on interworkingbetween the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network(PSTN) and the Public Land Mobile Network (PLMN)“.12 GSM 09.04: “Digital c

26、ellular telecommunications system; Interworking between the Public LandMobile Network (PLMN) and the Circuit Switched Public Data Network (CSPDN)“.13 GSM 09.05: “Digital cellular telecommunications system; Interworking between the Public LandMobile Network (PLMN) and the Packet Switched Public Data

27、Network (PSPDN) for PacketAssembly/Disassembly facility (PAD) access“.14 GSM 09.06 (ETS 300 975): “Digital cellular telecommunications system (Phase 2+); Interworkingbetween a Public Land Mobile Network (PLMN) and a Packet Switched Public DataNetwork/Integrated Services Digital Network (PSPDN/ISDN)

28、for the support of packet switcheddata transmission services“.15 GSM 09.07 (ETS 300 976): “Digital cellular telecommunications system (Phase 2+); Generalrequirements on interworking between the Public Land Mobile Network (PLMN) and theIntegrated Services Digital Network (ISDN) or Public Switched Tel

29、ephone Network (PSTN)“.16 GSM 09.10: “Digital cellular telecommunications system (Phase 2+); Information elementmapping between Mobile Station - Base Station System and BSS - Mobile-services SwitchingCentre (MS - BSS - MSC) Signalling procedures and the Mobile Application Part (MAP)“.17 GSM 09.11: “

30、Digital cellular telecommunications system (Phase 2+); Signalling interworking forsupplementary services“.18 CCITT Recommendation V.120: “Support by an ISDN of data terminal equipments with V-seriestype interface with provision for statistical multiplexing“.19 GSM 02.60: “Digital cellular telecommun

31、ications system (Phase 2+);General Packet Radio Service(GPRS); Service description; Stage 1“20 GSM 07.60: “Digital cellular telecommunications system (Phase 2+); General Packet RadioService (GPRS); Mobile Station (MS) supporting GPRS“21 GSM 09.60: “Digital cellular telecommunications system (Phase 2

32、+); General Packet RadioService (GPRS); GPRS Tunnelling Protocol (GTP) across the Gn and Gp Interface“0.2 AbbreviationsAbbreviations used in the present document are listed in GSM 01.04 1.1 Framework for defining Bearer ServicesBearer Services are described by attributes, which are intended to be in

33、dependent. These attributes are described anddefined in GSM 02.01 2. They are grouped into four categories:i) Information transfer attributes, which characterize the network capabilities for transferring information from auser access point in a GSM PLMN to a user access point in another network. (Re

34、fer to GSM 02.01 2 andGSM 04.02 5 for definitions of user access points, originating and terminating networks).ii) Access attributes, which describe the means for accessing network functions or facilities as seen at the accesspoint in the PLMN (see GSM 02.01 2).iii) Interworking attributes, which de

35、scribe properties of the terminating network and its access point. Theterminating network may include another GSM PLMN or the originating PLMN (see GSM 02.01 2).iv) General attributes, which deal with the service in general.Figure 1 shows the relation between the groups of attributes and their field

36、s of applicability.ETSIETSI EN 300 904 V7.0.2 (1999-12)7(GSM 02.02 version 7.0.2 Release 1998)Information Transferand AccessAttributes (note 3)Interworking AttributesIWF IWFGSM PLMNTransitNetworkTerminatingNetwork(note 1)General Attributes (note 2)NOTE 1: A transit network may not exist for a Bearer

37、 Service.NOTE 2: Communication may be established from either end.NOTE 3: The information transfer and access attributes of a Bearer Service relate to a direct peer-to-peercommunication of:-TEtoTE;- TE to a network gateway (supporting, for example, PSTN interworking); or- network gateway to a TE.Fig

38、ure 1: Relation between the groups of attributes and fields of applicabilityThe following table lists the individual attributes in each of the four groups. The GSM Bearer Service definitions in thepresent document are based on the “Minimal Set“ of attributes.Table 1: List of Bearer Service attribute

39、sMinimalSetInformation Transfer AttributesInformation Transfer Mode XInformation Transfer Rate XInformation Transfer Capability XEstablishment of Communication XSymmetry XCommunication Configuration XData CompressionAccess AttributesAccess Channel and RateSignalling Access ProtocolsInformation Acces

40、s ProtocolsInformation Access Structure XInformation Access Rate XInterworking AttributesGeneral AttributesSupplementary Services ProvidedQuality of Service XOperational and CommercialAttributes that are not part of the minimal set provide further technical detail and are required to fully define th

41、e use ofeach Bearer Service.General Packet Radio Service (GPRS) is specified in GSM 02.60 19.ETSIETSI EN 300 904 V7.0.2 (1999-12)8(GSM 02.02 version 7.0.2 Release 1998)See the GSM 07-series specifications 6, 7, 8, 9, 20 for information about the Signalling Access Protocols,Information Access Protoco

42、ls and related access attributes.GSM supplementary services are defined in GSM 02.04 3.Intercommunication is required with services in the PSTN, ISDN, CSPDN, PDN, PSPDN and other PLMNs. Thecapabilities that describe the Interworking Attributes are described in GSM 03.10 4 and the GSM 09-seriesspecif

43、ications 10 to 15 and 21.2 Bearer Service categoriesAll Bearer Service categories provide information transfer between R/S reference points and allow the use of sub-rateinformation streams which are rate-adapted.The Bearer Services can be grouped into the following categories:- Unrestricted Digital

44、Information (UDI);Provides the transfer of unrestricted digital information.- 3,1 kHz (External to the PLMN);Used to select a “3,1 kHz audio“ interworking function at the MSC. This service category is used wheninterworking with the ISDN or PSTN “3,1 kHz audio“ service and includes the capability to

45、select a modem atthe interworking function. “External to the PLMN“ indicates that the “3,1 kHz audio“ service is only used outsideof the PLMN, in the ISDN/PSTN. The connection within the PLMN, user access point to the interworkingfunction, is an unrestricted digital connection.-PAD;Provides an async

46、hronous connection to a PAD. This enables PLMN subscribers to access a packet network(PSPDN/ISDN). See GSM 09.05 13 for service and interworking specifications.- Packet;Provides a synchronous connection that enables PLMN subscribers to access a packet network (PSPDN/ISDN).See GSM 09.06 14 for servic

47、e and interworking specifications.- Alternate Speech/Data;Provides the capability to swap between speech and data during a call.If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used for theduration of the call.- If the data portion of the ca

48、ll requires multiple full rate channels, the speech portion uses a single full ratechannel.The access interface at the mobile station for the data portion is assumed to be a standard data interface. Somemeans must be provided to select the speech/data capability.- Speech followed by Data;Provides a

49、speech connection first and then at some time while the call is in progress, the user can switch to adata connection. The user cannot switch back to speech after the data portion.If either the speech or data portion of the call requires a full rate channel, a full rate channel shall be used fromthe start of the call. The network may then change to a half rate channel for the data portion.- If the data portion of the call requires multiple full rate channels, a single full rate channel shall be u