ETSI EN 301 428-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for Very Small Aperture Terminal (VSAT) Transmit-only transmit receive or receive-only satellite.pdf

1、 ETSI EN 301 428 V2.1.1 (2016-05) Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of art

2、icle 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 428 V2.1.1 (2016-05) 2 Reference REN/SES-00381 Keywords regulation, satellite, VSAT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 56

3、2 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of a

4、ny electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document For

5、mat (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETS

6、IDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, i

7、ncluding photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standar

8、ds Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are T

9、rade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 428 V2.1.1 (2016-05) 3 Contents Intellectual Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g3Introduction 7g31 Scope 9g32 References 10g32.1 Normative references . 10g32.2 Informative references 10g33 Definitions, s

10、ymbols and abbreviations . 11g33.1 Definitions 11g33.2 Symbols 13g33.2 Abbreviations . 13g34 Technical requirements specifications . 14g34.1 General . 14g34.1.1 Environmental profile . 14g34.1.2 Control and Monitoring Functions (CMF) 14g34.1.3 Operational configurations . 14g34.1.4 Transmit VSAT sta

11、tes and radio states . 14g34.1.4.1 Definitions . 14g34.1.4.2 Class A CMF. 14g34.1.4.3 Class B CMF . 15g34.1.4.4 Radio states . 15g34.2 Conformance requirements 16g34.2.1 Off-axis spurious radiation . 16g34.2.1.1 Justification . 16g34.2.1.2 Specification 16g34.2.1.2.1 Transmit VSAT . 16g34.2.1.2.2 Re

12、ceive-only VSAT 17g34.2.1.3 Conformance tests . 17g34.2.2 On-axis spurious radiation for transmit VSAT . 17g34.2.2.1 Justification . 17g34.2.2.2 Specification 17g34.2.2.2.1 Specification 1: “Carrier-on“ radio state 17g34.2.2.2.2 Specification 2: “Carrier-off“ and “Emissions disabled“ radio states 18

13、g34.2.2.3 Conformance tests . 18g34.2.3 Off-axis e.i.r.p. emission density within the band . 18g34.2.3.0 General 18g34.2.3.1 Justification . 18g34.2.3.2 Specification 18g34.2.3.3 Conformance tests . 20g34.2.4 Carrier suppression . 20g34.2.4.1 Justification . 20g34.2.4.2 Specification 20g34.2.4.3 Con

14、formance tests . 20g34.2.5 Mechanical (antenna pointing) for transmit VSAT 20g34.2.5.1 Justification . 20g34.2.5.2 Specification 20g34.2.5.3 Conformance tests . 20g34.2.6 Class A Control and Monitoring Functions 21g34.2.6.1 Control and Monitoring Functions (CMF) 21g34.2.6.1.1 General 21g34.2.6.1.2 C

15、MF state transition diagram 21g34.2.6.1.3 Specification of states 22g34.2.6.2 Control Channels (CC) 22g3ETSI ETSI EN 301 428 V2.1.1 (2016-05) 4 4.2.6.2.1 Justification . 22g34.2.6.2.2 Specification 22g34.2.6.2.3 Conformance tests . 23g34.2.6.3 Self monitoring functions 23g34.2.6.3.1 General 23g34.2.

16、6.3.2 Processor monitoring . 23g34.2.6.3.3 Transmit subsystem monitoring 24g34.2.6.3.4 VSAT transmission validation . 24g34.2.6.4 Reception of commands from the CCMF . 25g34.2.6.4.1 General 25g34.2.6.4.2 Disable message 25g34.2.6.4.3 Enable Message. 26g34.2.6.5 Power-on/Reset . 26g34.2.6.5.1 Justifi

17、cation . 26g34.2.6.5.2 Specification 26g34.2.6.5.3 Conformance tests . 26g34.2.7 Class B Control and Monitoring Functions 26g34.2.7.0 General 26g34.2.7.1 Processor monitoring 27g34.2.7.1.1 Justification . 27g34.2.7.1.2 Specification 27g34.2.7.1.3 Conformance tests . 27g34.2.7.2 Transmit subsystem mo

18、nitoring 28g34.2.7.2.1 Justification . 28g34.2.7.2.2 Specification 28g34.2.7.2.3 Conformance tests . 28g34.2.7.3 Power-on/Reset . 28g34.2.7.3.1 Justification . 28g34.2.7.3.2 Specification 28g34.2.7.3.3 Conformance tests . 28g34.2.7.4 Control Channel (CC) reception . 28g34.2.7.4.1 Justification . 28g

19、34.2.7.4.2 Specification 28g34.2.7.4.3 Conformance tests . 28g34.2.7.5 Network control commands 29g34.2.7.5.1 Justification . 29g34.2.7.5.2 Specification 29g34.2.7.5.3 Conformance test . 29g34.2.7.6 Initial burst transmission . 29g34.2.7.6.1 Justification . 29g34.2.7.6.2 Specification 29g34.2.7.6.3

20、Conformance tests . 29g34.2.8 Receive antenna off-axis gain pattern . 29g34.2.8.1 Justification . 29g34.2.8.2 Specification 30g34.2.8.3 Conformance tests . 30g34.2.9 Blocking performance. 30g34.2.9.1 Justification . 30g34.2.9.2 Specification 30g34.2.9.3 Conformance tests . 31g34.2.10 Adjacent Signal

21、 Selectivity . 31g34.2.10.1 Justification . 31g34.2.10.2 Specification 31g34.2.10.3 Conformance tests . 31g35 Testing for compliance with technical requirements 31g35.1 Environmental conditions for testing . 31g35.2 Essential radio test suites 31g36 Test methods for the complete VSAT 31g36.1 General

22、 . 31g36.2 Off-axis spurious radiation . 32g3ETSI ETSI EN 301 428 V2.1.1 (2016-05) 5 6.2.0 General 32g36.2.1 Test method 33g36.2.1.0 General 33g36.2.1.1 Up to 1 000 MHz 33g36.2.1.1.1 Test site 33g36.2.1.1.2 Measuring receivers . 34g36.2.1.1.3 Procedure . 34g36.2.1.2 Above 1 000 MHz . 34g36.2.1.2.0 G

23、eneral 34g36.2.1.2.1 Identification of the significant frequencies of spurious radiation 34g36.2.1.2.2 Measurement of radiated power levels of identified spurious radiation 35g36.2.1.2.3 Measurement of conducted spurious radiation at the antenna flange 36g36.3 On-axis spurious radiation for transmit

24、 VSAT . 37g36.3.1 Test method 37g36.3.1.1 Test site . 37g36.3.1.2 Method of measurement 37g36.3.1.2.1 General 37g36.3.1.2.2 Method of measurement at the antenna flange 37g36.3.1.2.3 Method of measurement with a test antenna . 38g36.4 Off-axis e.i.r.p. emission density within the band 39g36.4.0 Gener

25、al 39g36.4.1 Test method 39g36.4.1.1 General 39g36.4.1.2 Transmit output power density 39g36.4.1.2.1 General 39g36.4.1.2.2 Test site 39g36.4.1.2.3 Method of measurement 40g36.4.1.3 Antenna transmit gain . 41g36.4.1.3.1 General 41g36.4.1.3.2 Test site 41g36.4.1.3.3 Method of measurement 41g36.4.1.4 A

26、ntenna transmit radiation patterns 42g36.4.1.4.1 General 42g36.4.1.4.2 Test site 42g36.4.1.4.3 Test arrangement . 42g36.4.1.4.4 Co-polar radiation pattern-azimuth 42g36.4.1.4.5 Co-polar radiation pattern-elevation 43g36.4.1.4.6 Cross-polar radiation pattern-azimuth . 44g36.4.1.4.7 Cross-polar radiat

27、ion pattern-elevation . 44g36.4.2 Computation of results 45g36.5 Carrier suppression . 45g36.5.1 Test method 45g36.6 Antenna pointing for transmit VSAT . 45g36.6.1 Test method 45g36.7 Class A Control and Monitoring Functions 46g36.7.1 General 46g36.7.2 Test arrangement 46g36.7.3 Control Channels (CC

28、) . 47g36.7.3.1 Test method . 47g36.7.3.1.0 General 47g36.7.3.1.1 Test method for internal CC 47g36.7.3.1.2 Test method for external CC . 47g36.7.4 Processor monitoring 48g36.7.4.1 Test method . 48g36.7.5 Transmit subsystem monitoring 48g36.7.5.1 Test method . 48g36.7.6 VSAT transmission validation

29、48g36.7.6.1 Test method for VSAT validation by the CCMF for VSAT using internal CC 48g36.7.6.2 Test method for VSAT validation by receiving station(s) for VSAT using internal CC. 48g36.7.6.3 Test method for transmission validation for VSAT using external CC . 48g36.7.7 Reception of commands from the

30、 CCMF . 49g36.7.7.1 Test method . 49g3ETSI ETSI EN 301 428 V2.1.1 (2016-05) 6 6.7.8 Power-on/Reset . 49g36.7.8.1 Test method . 49g36.8 Class B Control and Monitoring Functions 49g36.8.0 General 49g36.8.1 Test arrangement 50g36.8.2 Processor monitoring-Test method . 50g36.8.3 Transmit subsystem monit

31、oring-Test method . 51g36.8.4 Power-on/Reset-Test method 51g36.8.5 Control Channel (CC) reception-Test method 51g36.8.6 Network Control commands-Test method 52g36.8.7 Initial burst transmission-Test method 54g36.9 Receive antenna off-axis gain pattern 54g36.9.1 Test method 54g36.9.1.1 Test site . 54

32、g36.9.1.2 Method of measurement 54g36.9.1.3 Computation 55g36.10 Blocking performance 55g36.10.1 Test method 55g36.11 Adjacent Signal Selectivity 56g36.11.1 Test method 56g37 Test methods for modified VSAT 56g37.1 General . 56g37.2 Antenna subsystem replacement 57g3Annex A (normative): Relationship

33、between the present document and the essential requirements of Directive 2014/53/EU . 58g3Annex B (informative): Pointing stability methodology . 60g3Annex C (informative): Bibliography . 61g3History 62g3ETSI ETSI EN 301 428 V2.1.1 (2016-05) 7 Intellectual Property Rights IPRs essential or potential

34、ly essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPR

35、s notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be giv

36、en as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Station

37、s and Systems (SES). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the ma

38、king available on the market of radio equipment and repealing Directive 1999/5/EC 4. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of t

39、he scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date of adoption of this EN: 16 May 2016 Date of latest announcement of this EN (doa): 31 August 2016 Date of l

40、atest publication of new National Standard or endorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “wil

41、l not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set o

42、f standards developed by ETSI and is designed to fit in a modular structure to cover all radio equipment under the RE Directive 4. The modular structure is shown in ETSI EG 201 399 i.1. Figure 1: Void Remarks on the present document The present document allows the choice of either a class A Control

43、and Monitoring system or a class B Control and Monitoring system. The class B system is more suitable for networks comprising very many terminals. ETSI ETSI EN 301 428 V2.1.1 (2016-05) 8 The determination of the parameters of the user earth stations using a given geo-stationary satellite for the pro

44、tection of the spectrum allocated to that satellite, is considered to be under the responsibility of the satellite operator or the satellite network operators. For this reason the requirement on the cross polarization discrimination which was in ETSI TBR 028 i.4 has not been copied in the present do

45、cument and inter-modulation limits inside the band 14,0 GHz to 14,5 GHz are to be determined by system design and are subject to satellite operator specifications. The requirements have been selected to ensure an adequate level of compatibility with other radio services. The levels, however, do not

46、cover extreme cases which may occur in any location but with a low probability of occurrence. The present document may not cover those cases where a potential source of interference which is producing individually repeated transient phenomena or a continuous phenomenon is present, e.g. a radar or br

47、oadcast site in the near vicinity. In such a case it may be necessary to use special protection applied to either the source of interference, or the interfered part or both. The present document does not contain any requirement, recommendation or information about the installation of the VSAT. All p

48、arts of the indoor unit related to reception, processing and presentation of the received information except the control channel are not within the scope of the present document. The syntax of the control channel messages is outside the scope of the present document. ETSI ETSI EN 301 428 V2.1.1 (201

49、6-05) 9 1 Scope The present document applies to Very Small Aperture Terminals (VSATs) which have the following characteristics: The VSAT is operating in one or more frequency ranges in the part of the following bands allocated exclusively to the Fixed Satellite Services (FSS): - 14,00 GHz to 14,25 GHz (earth-to-space); - 12,50 GHz to 12,75 GHz (space-to-earth); or in the shared parts of the following bands, allocated to the FSS and Fixed Services (FS): - 14,25 GHz to 14,50 GHz (earth-to-space); - 10,70 GHz to 11,70 GHz (space-to-earth). The VSAT uses linear pola