ETSI EN 301 442-2016 Satellite Earth Stations and Systems (SES) Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations for Satellite Personal Co_1.pdf

1、 ETSI EN 301 442 V2.1.1 (2016-06) Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2

2、 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 442 V2.1.1 (2016-06) 2 Reference REN/SES-00384 Keywords earth station, MES, MSS, regulation,

3、 satellite, S-PCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be d

4、ownloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any exi

5、sting or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be su

6、bject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org

7、/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without

8、the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Member

9、s. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 442 V2.1.1 (2016-06) 3 Contents Intellectual Property Rights 6g3Foreword . 6

10、g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 10g34 Technical requirements specifications . 11g34.1 Environmental profile . 11g34.1.1 Gene

11、ral 11g34.1.2 Temperature 11g34.1.3 Voltage 11g34.1.4 Vibration. 11g34.2 Conformance requirements 11g34.2.1 Unwanted emissions outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on) . 11g34.2.1.1 Justification . 11g34.2.1.2 Technical Requirement . 11g34.2.1.3 Conformance Test . 12g34.2.2 Unwanted

12、emissions within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to 1 980,1 MHz and 2 009,9 MHz to 2 011,9 MHz (carrier-on) . 12g34.2.2.1 Justification . 12g34.2.2.2 Technical Requirement . 12g34.2.2.3 Conformance Test . 13g34.2.3 Unwanted emissions in carrier-off state 13g34.2.3.1 Justification .

13、 13g34.2.3.2 Technical Requirement . 13g34.2.3.3 Conformance Test . 14g34.2.4 MES Control and Monitoring Functions (CMF) 14g34.2.4.1 Self-monitoring functions / Processor monitoring 14g34.2.4.1.1 Justification . 14g34.2.4.1.2 Technical Requirement 14g34.2.4.1.3 Conformance Test . 14g34.2.4.2 Self-mo

14、nitoring functions / Transmit frequency generation sub-system monitoring 14g34.2.4.2.1 Justification . 14g34.2.4.2.2 Technical Requirement 14g34.2.4.2.3 Conformance Test . 14g34.2.4.3 Network control authorization 15g34.2.4.3.1 Justification . 15g34.2.4.3.2 Technical Requirement 15g34.2.4.3.3 Confor

15、mance Test . 15g34.2.4.4 Network control reception . 15g34.2.4.4.1 Transmit frequency control . 15g34.2.4.5 Fellow radio stations in a dual-mode or multi-mode terminal 15g34.2.4.5.1 Justification . 15g34.2.4.5.2 Technical Requirement 15g34.2.4.5.3 Conformance Test . 15g34.2.5 Equipment identity 16g3

16、4.2.5.1 Justification . 16g34.2.5.2 Technical Requirement . 16g34.2.5.3 Conformance Test . 16g3ETSI ETSI EN 301 442 V2.1.1 (2016-06) 4 4.2.6 Receiver Adjacent Channel Selectivity. 16g34.2.6.1 Justification . 16g34.2.6.2 Technical Requirement . 16g34.2.6.3 Conformance Test . 16g34.2.7 Receiver Blocki

17、ng Characteristics 16g34.2.7.1 Justification . 16g34.2.7.2 Technical Requirement . 17g34.2.7.3 Conformance Test . 17g35 Testing for compliance with technical requirements 17g35.1 Environmental conditions for testing . 17g35.1.1 Specification of the environmental test conditions . 17g35.1.2 Tests und

18、er extreme voltage conditions 17g35.2 Essential radio test suites 18g35.2.1 General 18g35.2.1.1 Presentation of equipment for testing purposes. 18g35.2.1.2 Description of equipment 18g35.2.1.3 Testing of host-connected equipment and plug-in modules 19g35.2.1.3.1 Alternative approaches 19g35.2.1.3.2

19、Alternative A: combined equipment 19g35.2.1.3.3 Alternative B: use of a test jig . 19g35.2.1.4 CMF / Special Test Equipment (STE) 19g35.2.1.5 General test requirements 20g35.2.1.5.1 MES test modes . 20g35.2.1.5.2 Special Test Equipment . 20g35.2.1.5.3 Laboratory Test Equipment (LTE) 21g35.2.1.5.4 Me

20、thod of test for MES RF emissions according to equipment type 22g35.2.1.5.5 Procedures for measurement of MES RF radiated emissions 22g35.2.1.5.6 Procedures for measurement of MES RF conducted emissions 26g35.2.1.5.7 Interpretation of the measurement results 28g35.2.1.5.8 Test report 28g35.2.2 Unwan

21、ted emissions outside the band 1 980,1 MHz to 2 009,9 MHz (carrier-on) . 28g35.2.2.1 Method of test . 28g35.2.2.2 Peak measurement . 28g35.2.2.3 Average measurement. 29g35.2.2.4 Test requirements 29g35.2.3 Unwanted emissions within the bands 1 980,1 MHz to 2 009,9 MHz, 1 978,1 MHz to 1 980,1 MHz and

22、 2 009,9 MHz to 2 011,9 MHz (carrier-on) . 29g35.2.3.1 Method of test . 29g35.2.3.2 Measurement method 30g35.2.3.3 Test requirements 30g35.2.4 Unwanted emissions in carrier-off state 30g35.2.4.1 Method of test . 30g35.2.4.2 Measurement method 31g35.2.4.3 Test requirements 31g35.2.5 MES Control and M

23、onitoring Functions (CMF) 31g35.2.5.1 Self-monitoring functions / Processor Monitoring 31g35.2.5.2 Self-monitoring functions / Transmit frequency generation sub-system monitoring 31g35.2.5.3 Network control authorization 31g35.2.5.3.1 Method of test 31g35.2.5.3.2 Test procedure . 32g35.2.5.3.3 Test

24、requirement 32g35.2.5.4 Network control reception . 32g35.2.5.4.1 Transmit frequency control . 32g35.2.5.5 Fellow radio stations in a dual-mode or multi-mode terminal 33g35.2.5.5.1 Method of test 33g35.2.5.5.2 Test procedure . 33g35.2.5.5.3 Test requirements 33g35.2.6 Equipment identity 33g35.2.6.1

25、Method of test . 33g35.2.6.2 Test procedure . 33g35.2.6.3 Test requirements 33g3ETSI ETSI EN 301 442 V2.1.1 (2016-06) 5 5.2.7 Receiver Adjacent Channel Selectivity. 34g35.2.7.1 General 34g35.2.7.2 Test set-up. 34g35.2.7.3 Test procedure . 34g35.2.8 Receiver Blocking Characteristics 34g35.2.8.1 Gener

26、al 34g35.2.8.2 Test set-up. 35g35.2.8.3 Test procedure . 35g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 36g3Annex B (informative): Explanation of nominated bandwidth 38g3B.1 Introduction 38g3B.2 Interpretation of Parameters

27、 Bn,fc, a, b 38g3B.3 Choice of nominated bandwidth . 38g3B.4 Maximum value for nominated bandwidth 40g3Annex C (informative): Bibliography . 42g3History 43g3ETSI ETSI EN 301 442 V2.1.1 (2016-06) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have b

28、een declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards

29、“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not refere

30、nced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document has b

31、een prepared under the Commissions standardisation request C(2015) 5376 final i.2 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment

32、 and repealing Directive 1999/5/EC 7. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption

33、 of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations. National transposition dates Date of adoption of this EN: 12 May 2016 Date of latest announcement of this EN (doa): 31 August 2016 Date of latest publication of new National Standard or en

34、dorsement of this EN (dop/e): 28 February 2017 Date of withdrawal of any conflicting National Standard (dow): 28 February 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted

35、 as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to

36、 fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the Directive 2014/53/EU 7. The modular structure is shown in ETSI EG 201 399 i.1. ETSI ETSI EN 301 442 V2.1.1 (2016-06) 7 1 Scope The present document applies to Mobile Earth Station (MES) r

37、adio equipment which have the following characteristics: these MES operate in a non-geostationary orbit (NGSO) mobile-satellite system; these MES have both transmit and receive capabilities and operate in a Satellite-Personal Communications Network (S-PCN). An S-PCN MES may be handheld, portable, ve

38、hicle-mounted, host connected, semi-fixed or fixed equipment, or may be an element in a multi-mode terminal. It may consist of a number of modules with associated connections and user interface, or may be a self-contained single unit; these LMESs are controlled and monitored by a Network Control Fac

39、ility (NCF). The NCF is outside the scope of the present document; if the MES is an element in a multi-mode terminal, unless otherwise stated in the present document, its requirements apply only to the S-PCN MES element of the terminal operating in the MSS frequency bands given in table 1; these MES

40、 are capable in operating in all or part of the frequency bands shown in table 1. Table 1: Mobile Satellite Service (MSS) frequency bands MES MSS frequency bands Transmit (earth to space) 1 980 MHz to 2 010 MHz Receive (space to earth) 2 170 MHz to 2 200 MHz The present document is intended to cover

41、 the provisions of Directive 2014/53/EU 7 (RE Directive) article 3.2 which states that “.radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference“. In addition to the present document, other ENs that

42、 specify technical requirements in respect of essential requirements under other parts of article 3 of the Directive 2014/53/EU 7 may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the ETSI web site. 2 References 2.1 Normative references Referenc

43、es are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced docum

44、ents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a

45、re necessary for the application of the present document. 1 Void. 2 Recommendation ITU-T O.153 (1992): “Basic parameters for the measurement of error performance at bit rates below the primary rate“. 3 IEC 60068-2-1 (March 2007): “Environmental testing - Part 2-1: Tests - Test A: Cold“. 4 IEC 60068-

46、2-2 (July 2007): “Environmental testing - Part 2-2: Tests - Test B: Dry heat“. ETSI ETSI EN 301 442 V2.1.1 (2016-06) 8 5 IEC 60068-2-64 (April 2008) Ed. 2.0: “Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance“. 6 Void. 7 Directive 2014/53/EU of the European

47、 Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. 2.2 Informative references References are either specific (identified by date of publication and/

48、or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of p

49、ublication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI EG 201 399 (V3.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the Radio ii) when a b, 1 nominal carrier frequency for narrow-band systems; or iii) 1 nominal carrier frequency for wide-band systems. The frequen