ETSI EN 301 469-4-2000 Digital Enhanced Cordless Telecommunications (DECT) DECT Packet Radio Service (DPRS) Test Case Library (TCL) Part 4 Test Suite Structure (TSS) and Test Purpo_1.pdf

1、ETSI EN 301 469-4 1.1.1 (2000-10) European Standard (Telecommunications series) Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer 2 ETSI EN 301 469-4

2、 V1.l.l (2000-1 O) The pre Reference D ENID ECT-040047-4 Keywords DECT, DPRS, TSS Essential, or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (-). Pursuant to the ETSI IPR P

3、olicy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This E

4、uropean Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 4 of a multi-part deliverable covering the Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case

5、Library (TCL), as identified below: Part 1: Part 2: Part 3: Part 4: Part 5: Part 6: Part 7: Part 8: Part 9: “Test Suite Structure (TSS) and Test Purposes (TP) - Medium Access Control (MAC) layer“; “Abstract Test Suite (ATS) - Medium Access Control (MAC) layer - Portable radio Termination (PT)“; “Abs

6、tract Test Suite (ATS) - Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer“; “Abstract Test Suite (ATS) - Data Link Control (DLC) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) -

7、 Data Link Control (DLC) layer - Fixed radio Termination (FT)“; “Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer“; “Abstract Test Suite (ATS) - Network (NWK) layer - Portable radio Termination (PT)“; “Abstract Test Suite (ATS) - Network (NWK) layer - Fixed radio Termination (

8、FT)“. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 13 October 2000 3 1 January 200 1 3 1 Ju

9、ly 200 1 3 1 July 200 1 ETSI 6 ETSI EN 301 469-4 V1.l.l (2000-1 O) 1 Scope The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the DECT Packet Radio Service (DPRS) Data Link Control (DLC) layer. The objective of this test specification is to provide a basis fo

10、r conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers DECT equipment. The IS0 standard for the methodology of conformance testing (ISO/IEC 9646-1 4 and ISO/IEC 9646-2 5) as well as the ETSI rules for conformance testing (E

11、TS 300 406 3) are used as a basis for the test methodology. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number,

12、 etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETSI EN 300 175-4: “Digital Enh

13、anced Cordless Telecommunications (DECT); Common interface; Part 4: Data Link Control (DLC) layer“. ETSI EN 30 1 649: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Services (DPRS)“. ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conform

14、ance testing specifications; Standardization methodology“. Pl 31 41 ISO/IEC 9646- 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. (See also ITU-T Recommendation X.290). ISO/IEC 9646-2: “Information technology - Op

15、en Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification“. (See also ITU-T Recommendation X.29 i). 51 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protoco

16、l profile test specification“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation conformance statement“. ETSI EN 30 1 469-7: “Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (

17、DPRS) Test Case Library (TCL); Part 7: Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer“. ETSI 7 ETSI EN 301 469-4 V1.l.l (2000-1 O) 3 3.1 Definitions and abbreviations Definitions For the purposes of the present document, the following terms and definitions apply: a) the term

18、s given in ISODEC 9646-7 7; and b) the definitions given in EN 300 175-4 i. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISODEC 9646-1 4, ISODEC 9646-6 6, ISODEC 9646-7 7 and EN 300 175-4 i apply. In particular, the following abbreviations apply: BI BO BV C/

19、L c/o CA C-plane DLC FP FT IUT LAPC Lb MAC NWK PDU PICS PIXIT PP PT SAP1 TP TSS ULl U-plane Invalid Behaviour Inopportune Behaviour Valid Behaviour Connectionless mode Connection Oriented mode Capability tests Control plane Data Link Control layer Fixed Part Fixed radio Termination Implementation Un

20、der Test a DLC layer C-plane protocol entity a DLC broadcast entity Medium Access Control layer Network layer Protocol Data Unit Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testing Portable Part Portable radio Termination Service Access Point Identifie

21、r Test Purpose Test Suite Structure Unassigned Link Identifier (U-Plane) User plane ETSI 8 ETSI EN 301 469-4 V1.l.l (2000-1 O) Data Link Control layer Data Link Control layer C-Plane (Control plane) U-Plane (User plane) Layer 4 Test suite structure (2b) 4.1 Overview Management Entity The Data Link C

22、ontrol (DLC) layer is layer 2b of the DECT protocol stack. The separation of the user information from the DECT signalling data is managed by the allocation of two independent planes: (24 Medium Access Control layer Physical layer (1) Lower Network layer Figure 1 : DECT protocol stack The U-plane is

23、 the part of the DLC implementation that is responsible for the transmission of the user data. The U-plane may provide a series of different services and facilities, grouped into categories (LUX families). The C-Plane is the second part of DECT DLC and is mainly involved with the transfer of signall

24、ing information. It provides the means to support DECT Connection Oriented, Connectionless and Broadcast services (the broadcast service exists only at the FT to PT direction). DECT DLC provides three classes of operation (Unacknowledged for C/L services, Single frame and Multiframe for C/O services

25、). At the DLC layer, C-plane and U-plane resources are considered as completely independent. The association of C and U-plane resources to serve a higher layer service (e.g. to setup and maintain a call) is a NWK layer responsibility. Moreover, no interaction is required between the services provide

26、d by each of the planes. Figure 2 shows the DLC (TSS) including its subgroups and defined for the conformance testing. ETSI 9 ETSI EN 301 469-4 V1.l.l (2000-1 O) DLC - Class U Class A Lb + C-plane + U-plane + Class O + Class i + Class2 + Class3 T CA BV BO BI - CA BV BO BI CA BV BO BI T CA BV BO BI -

27、 CA BV BO BI T CA BV BO BI - CA BV BO BI Figure 2: DLC TSS Test suite structure (TSS) The test suite is structured as a tree with a first level defined as DLC representing the protocol group “DLC for Portable Part (PP) and Fixed Part (FT)“. 4.3 Test groups The test groups are organized in three leve

28、ls. The first level creates two protocol groups representing the protocol plane. The second level separates the protocol plane in functional modules. The last level contains the standard IS0 subgroups CA, BV, BO and BI. 4.3.1 Protocol groups The protocol groups identifies the DECT DLC planes, C-Plan

29、e and U-Plane, as defined in EN 300 175-4 i. 4.3.1 .I C-plane group The C-plane protocol group is divided in four functional modules. The first functional module identifies the LAPC Class U services. The second functional module identifies the LAPC Class A services. The third functional module ident

30、ifies the LAPC Class B services. The last functional module identifies the broadcast services Lb. ETSI 10 TP Id according to the TP naming conventions TP Id Reference Condition Stimulus Expected behaviour ETSI EN 301 469-4 V1.l.l (2000-1 O) Reference. Initial condition. Stimulus. Expected behaviour.

31、 The TP Id is a unique identifier it shall be specified according to the TP naming conventions defined in the subclause below. The reference should contain the references of the subject to be validated by the actual TP (specification reference, clause, paragraph). The condition defines in which init

32、ial state the IUT has to be to apply the actual TP. The stimulus defines the test event to which the TP is related. Definition of the events that are expected from the IUT to conform to the base specification. 4.3.1.2 U-plane group The U-plane protocol group is divided in five functional modules. Th

33、e first functional module identifies the Class O transmission procedures. The second functional module identifies the Class 1 transmission procedures. The third functional module identifies the Class 2 transmission procedures. The forth functional module identifies the Class 3 transmission procedure

34、s. The last functional module identifies the LU3 LAP-U protocol. 4.3.2 Main test groups The main test groups are the Capability group (CA), the Valid Behaviour group (BV), the inopportune Behaviour group (BO) and the Invalid Behaviour group (BI). 4.3.2.1 CApability (CA) tests This test sub group sha

35、ll provide limited testing of the major IUT capabilities aiming to assure that the claimed capabilities are correctly supported, in accordance with the PICS. 4.3.2.2 Valid Behaviour (BV) tests This test sub group shall verify that the IUT reacts in conformity with the DPRS standard 2, on receipt or

36、exchange of a valid Protocol Data Units (PDU). Valid PDU, means, that the exchange of messages and the content of the exchanged messages are considered as valid. 4.3.2.3 InOpportune Behaviour (BO) tests This test sub group shall verify that the IUT is capable of a valid reaction, when an inopportune

37、 protocol event occurs. Such an event is syntactically correct but it occurs when it is not expected. 4.3.2.4 Invalid Behaviour (BI) tests This test sub group shall verify that the IUT reacts in conformity with the DPRS standard 2, on receipt of a syntactically invalid PDU. 5 Test Purposes (TP) 5.1

38、I nt roduct ion 5.1.1 TP definition conventions The TPs are defined following particular rules as shown in table 1. Table 1 : TP definition rules ETSI 11 Test group objective: ETSI EN 301 469-4 V1.l.l (2000-1 O) To check the behaviour of the Lc Frame delimiting and sequencing service of the DLC laye

39、r of the IUT. 5.1.2 TP naming conventions The identifier of the TP is built according to table 2. Test purposes which do not already exist in the CI test case library DPRS - D.8 Lc Frame delimiting and sequencing service C, channel fragmentation and recombination are highlighted by prefixing the wor

40、d data to their test purpose number. EN 300 175-4 l: 6.1.2, 6.1.3, Table 2: TP naming convention CF channel fragmentation and recombination Selection of logical channels (C, and C,) Identifier: TPd m- = functional module U A L O 1 2 3 V O I X= Type of testing C ann = sequential number (000-999) 6.1.

41、4, 6.1.4.2 EN 300 175-4 l: 6.1.2, 6.1.3, 6.1.4, 6.1.4.1 EN 300 175-4 l: 10.2.5 C-plane Class U services C-plane Class A services C-plane Broadcast services U-plane transmission Class O U-plane transmission Class 1 U-plane transmission Class 2 U-plane transmission Class 3 CA, Capability Tests BV, Val

42、id Behaviour Tests BO, Inopportune Behaviour Tests BI, Invalid Behaviour Tests Test Purpose Number 5.1.3 Sources of TP definitions All TPs are specified according to EN 300 175-4 i with respect to the requirements expressed in EN 301 649 2. 5.2 C-plane 5.2.1 .I DLC service and procedure concerned 5.

43、2.1.2 LC test purposes The functions of the LC entity (frame delimiting, checksum generationkhecking, fragmentation of DLC frames, and routing of frame to/from logical channels) are implicitly covered by the test purposes designed for the C-plane. 5.2.2 LAPC Class U service I Test group objective: I

44、To check the behaviour of the LAPC Class U service of the DLC layer of the IUT. ETSI 12 DPRS - D.7 Data Link Service (LAPC + Lc) class U service Class U use of LLN for unacknowledged information transfer ETSI EN 301 469-4 V1.l.l (2000-1 O) EN 300 175-4 l: 9.3.1 5.2.2.1 DLC service and procedure conc

45、erned Subgroup objective: Limited testing of the major IUT capabilities aiming to assure that the LAPC Class U service is correctlv suooorted. IClass U unacknowledged release IEN 300 175-4 l: 9.3.4 5.2.2.2 CA test purposes Test purposes: TPUC-000 IDPRS - D.7 Data Link Service (LAPC + Lc) class U ser

46、vice EN 300 175-4 l: 9.3. Only applicable when a procedure is specified in the PIXIT to force the IUT to send an UI frame. IVerify that the IUT is able to generate an UI frame by using MAC connectionless services. IDPRS - D.7 Data Link Service (LAPC + Lc) class U service TPUC-002 EN 300 175-4 l: 9.3

47、. Only applicable when a procedure is specified in the PIXIT to determine UI frame reception. IVerify that the IUT is able to receive an UI frame over MAC connectionless services. IDPRS - D.7 Data Link Service (LAPC + Lc) class U service TPUC-003 EN 300 175-4 l: 9.3. Only applicable when a procedure

48、 is specified in the PIXIT to determine UI frame reception. Verify that the IUT is able to receive an UI frame over an open MAC connection. 5.2.2.3 BV test purposes No BV TPs are defined for LAPC Class U service in the present document. ETSI 13 Subgroup objective: ETSI EN 301 469-4 V1.l.l (2000-1 O)

49、 To verify that the IUT reacts in conformity with the standard, on receipt or exchange of a syntactically invalid LAPC Class U service PDU. 5.2.2.4 BI test purposes EN 300 175-4 l: 9.3.3.2. Only applicable when a procedure is specified in the PIXIT to determine UI frame reception. Verify that the IUT, on receipt of an UI frame with P bit set to Il, accepts this erroneous frame. The UI EN 300 175-4 l: 9.3.3.2. Only applicable when a procedure is specified in the PIXIT to determine UI frame reception. Verify that the IUT, on receipt of a