ETSI EN 301 489-1-2017 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 1 Common technical requirements Harmonised Standard covering the essential.pdf

1、 ETSI EN 301 489-1 V2.1.1 (2017-02) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of D

2、irective 2014/30/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 2 Reference REN/ERM-EMC-333 Keywords EMC, harmonised standard, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 -

3、 NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electr

4、onic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF)

5、 version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDelivera

6、bleStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including

7、photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Instit

8、ute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Mark

9、s registered and owned by the GSM Association. ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 8g31 Scope 9g32 References 10g32.1 Normative references . 10g32.2 Informative references 11g33 Definitions, symbols and abbreviation

10、s . 12g33.1 Definitions 12g33.2 Symbols 15g33.3 Abbreviations . 15g34 Test conditions . 16g34.1 General . 16g34.2 Arrangements for test signals . 16g34.2.0 General 16g34.2.1 Arrangements for test signals at the input of transmitters . 16g34.2.2 Arrangements for test signals at the RF output of trans

11、mitters . 16g34.2.3 Arrangements for test signals at the RF input of receivers . 17g34.2.4 Arrangements for test signals at the output of receivers . 17g34.2.5 Arrangements for testing transmitter and receiver together (as a system) 17g34.3 RF exclusion band of radio equipment . 18g34.3.1 General 18

12、g34.3.2 Exclusion band for transmitters or the transmitter part of transceivers. 18g34.3.2.1 General 18g34.3.2.2 Channelized Equipment 18g34.3.2.3 Non-Channelized Equipment 18g34.3.3 Exclusion band for receivers or the receiver part of transceivers . 18g34.3.3.1 Applicability 18g34.3.3.2 Channelized

13、 Equipment 18g34.3.3.3 Non-Channelized Equipment 19g34.4 Narrow band responses of receivers or receivers which are part of transceivers . 19g34.5 Normal test modulation 19g35 Performance assessment . 20g35.1 General . 20g35.2 Equipment which can provide a continuous communication link 20g35.3 Equipm

14、ent which does not provide a continuous communication link 21g35.4 Ancillary equipment . 21g35.5 Equipment classification 21g36 Performance criteria . 22g36.0 Introduction 22g36.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 22g36.2 Performance criteria for t

15、ransient phenomena applied to transmitters and receivers . 22g36.3 Performance criteria for equipment which does not provide a continuous communication link 23g36.4 Performance criteria for ancillary equipment tested on a stand alone basis . 23g37 Applicability overview tables . 23g37.0 Introduction

16、 23g37.1 EMC emission 24g37.2 Immunity 24g38 Methods of measurement and limits for EMC emissions 25g38.1 Test configuration. 25g38.2 Enclosure port of ancillary equipment measured on a stand alone basis 25g38.2.1 General 25g3ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 4 8.2.2 Test method 26g38.2.3 Limit

17、s 26g38.3 DC power input/output ports 26g38.3.1 General 26g38.3.2 Test method 26g38.3.3 Limits 26g38.4 AC mains power input/output ports . 27g38.4.1 General 27g38.4.2 Test method 27g38.4.3 Limits 27g38.4.3.1 General 27g38.4.3.2 AC Power port used for power supply only 28g38.4.3.3 AC power input port

18、 also used for PLC Communications 28g38.5 Harmonic current emissions (AC mains input port) . 28g38.6 Voltage fluctuations and flicker (AC mains input port) . 28g38.7 Wired network ports . 28g38.7.1 General 28g38.7.2 Test method 28g38.7.3 Limits 28g39 Test methods and levels for immunity tests . 29g3

19、9.1 Test configuration. 29g39.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 29g39.2.1 General 29g39.2.2 Test method 29g39.2.3 Performance criteria 30g39.3 Electrostatic discharge 30g39.3.1 General 30g39.3.2 Test method 30g39.3.3 Performance criteria 30g39.4 Fast transients, common

20、mode . 31g39.4.1 General 31g39.4.2 Test method 31g39.4.3 Performance criteria 31g39.5 Radio frequency, common mode 31g39.5.1 General 31g39.5.2 Test method 32g39.5.3 Performance criteria 32g39.6 Transients and surges in the vehicular environment . 32g39.6.1 General 32g39.6.2 Test method 33g39.6.3 Per

21、formance criteria 33g39.7 Voltage dips and interruptions 33g39.7.1 General 33g39.7.2 Test method 33g39.7.3 Performance criteria 33g39.8 Surges . 34g39.8.1 General 34g39.8.2 Test method 34g39.8.2.0 General 34g39.8.2.1 Test method for wired network ports directly connected to outdoor cables 34g39.8.2.

22、2 Test method for wired network ports connected to indoor cables . 35g39.8.2.3 Test method for mains ports 35g39.8.3 Performance criteria 35g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU and Directive 2014/30/EU 36g3A.1 Relat

23、ionship between the present document and the essential requirements of Directive 2014/53/EU 36g3A.2 Relationship between the present document and the essential requirements of Directive 2014/30/EU 37g3ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 5 Annex B (normative): Application of harmonised EMC standa

24、rds to multi-radio and multi-standard-radio equipment 39g3B.1 Introduction 39g3B.2 Multi-radio equipment capable of independent transmission. 39g3B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent transmission 39g3B.4 Multi-radio equipment comprising of numerous

25、identical radio transmitters 39g3Annex C (informative): Bibliography . 40g3Annex D (informative): Change history . 41g3History 42g3ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. Th

26、e information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available fr

27、om the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314

28、(or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been

29、prepared under the Commissions standardisation request C(2015) 5376 final i.16 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment an

30、d repealing Directive 1999/5/EC i.1. The present document has been prepared to provide one voluntary means of conforming to the essential requirements of Directive 2014/30/EU i.2 of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States r

31、elating to electromagnetic compatibility (recast). NOTE: The corresponding Commissions standardisation request to provide one voluntary means of conforming to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibili

32、ty (recast) i.2 is expected shortly. Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the present document, a pre

33、sumption of conformity with the corresponding essential requirements of the corresponding Directives and associated EFTA regulations. The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following way: One EMC standard for all radio equipment mad

34、e up of several parts. All common technical requirements for EMC emission and immunity have been placed in the common part, which is the present document. Separate parts have been developed to cover specific product related radio equipment test conditions, test arrangements, performance assessment,

35、performance criteria, etc. A clause is included in each of the specific radio parts, entitled “special conditions“, which is used as appropriate to cover any deviations or additions to the common requirements set out in the present document. The present document is part 1 of a multi-part deliverable

36、 covering ElectroMagnetic Compatibility (EMC) standard for radio equipment and services, as identified below: Part 1: “Common technical requirements; Part 2: “Specific conditions for radio paging equipment“; Part 3: “Specific conditions for Short-Range Devices (SRD) operating on frequencies between

37、9 kHz and 246 GHz“; Part 4: “Specific conditions for fixed radio links and ancillary equipment“; ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 7 Part 5: “Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA)“; Part 6:

38、“Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment“; Part 9: “Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices“; Part 11: “Specific conditions for terrestrial sound broadc

39、asting service transmitters“; Part 12: “Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)“; Part 13: “Specific conditions for Citizens Band (CB) radio and ancillary

40、 equipment (speech and non-speech)“; Part 14: “Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters“; Part 15: “Specific conditions for commercially available amateur radio equipment“; Part 17: “Specific conditions for Broadband Data Transmission Systems“; Pa

41、rt 19: “Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications“; Part 20: “Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)“; Part 22: “Specific conditions for ground based VHF aero

42、nautical mobile and fixed radio equipment“; Part 27: “Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)“; Part 28: “Specific conditions for wireless digital video links“; Part 29: “Specific conditions for Medical Data Service Devices

43、 (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands“; Part 31: “Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)“; Part 33: “Specific conditions for Ultra Wide Band (UW

44、B) devices“; Part 34: “Specific conditions for External Power Supply (EPS) for mobile phones“; Part 35: “Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands“; Part 50: “Specific conditions for Cellular Communication Base Station (BS),

45、repeater and ancillary equipment“; Part 51: “Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz“; Part 52: “Specific conditions for Cellular Communication Mobile and porta

46、ble (UE) radio and ancillary equipment“. NOTE: Parts 7, 8, 10, 16, 18, 23, 24, 25, 26 and 32 of this multi-part deliverable have been removed from this listing as they do not cover the new Directives in force, Directive 2014/53/EU i.1 and Directive 2014/30/EU i.2. ETSI ETSI EN 301 489-1 V2.1.1 (2017

47、-02) 8 National transposition dates Date of adoption of this EN: 23 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 October 2017 Date of withdrawal of any conflicting National Standard

48、(dow): 31 October 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).

49、“must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 9 1 Scope The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU i.1 and article 6 of Directive 2014/30/EU i.2 for radio equipment and associated ancillary equipment, excluding broadcast receivers, in respect of ElectroMagnetic Compatibility (EMC). Where the present document is being used to evaluate the EMC performance of “combined radio and non-radio equipment“, ETSI EG 203