ETSI EN 301 489-5-2016 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 5 Specific conditions for Private land Mobile Radio (PMR) and ancillary eq.pdf

1、 ETSI EN 301 489-5 V2.1.1 (2016-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the e

2、ssential requirements of article 3.1(b) of the Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 2 Reference REN/ERM-EMC-345 Keywords EMC, harmonised standard, PMR, radio, regulation, TETRA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Te

3、l.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made ava

4、ilable in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the onl

5、y prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and oth

6、er ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or ut

7、ilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to

8、 reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and

9、of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g3

10、2.2 Informative references 7g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 Test conditions . 8g34.1 General . 8g34.2 Arrangements for test signals . 8g34.2.0 General 8g34.2.1 Arrangements for test signals at the input of transmitters . 8g34.2.2 Arrangements for te

11、st signals at the output of transmitters . 8g34.2.3 Arrangements for test signals at the input of receivers . 8g34.2.4 Arrangements for test signals at the output of receivers . 9g34.2.5 Arrangements for testing transmitter and receiver together (as a system) 9g34.3 Exclusion bands 9g34.3.0 General

12、9g34.3.1 Receiver and receivers of transceivers exclusion band . 9g34.3.2 Transmitter exclusion band . 9g34.4 Narrow band responses of receivers . 9g34.5 Normal test modulation 9g34.5.1 General 9g34.5.2 Analogue speech equipment . 10g34.5.2.1 Angle modulated equipment . 10g34.5.2.2 Non-angle modulat

13、ed equipment 10g34.5.3 Digital speech equipment 10g34.5.4 Non-speech equipment (data, specific response, etc.) 10g34.5.5 TETRA equipment 10g35 Performance assessment . 11g35.1 General . 11g35.2 Equipment which can provide a continuous communications link 11g35.3 Equipment which does not provide a co

14、ntinuous communications link . 11g35.4 Ancillary equipment . 11g35.5 Equipment classification 11g35.6 Performance assessment of equipment providing an audio path 11g35.6.1 Introduction. 11g35.6.2 Assessment of audio path using the audio breakthrough method . 11g35.6.3 Assessment of audio path using

15、the audio distortion method . 13g36 Performance criteria . 13g36.0 General . 13g36.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) 13g36.2 Performance criteria for Transient phenomena applied to Transmitters (TT) 14g36.3 Performance criteria for Continuous phenomena appl

16、ied to Receivers (CR) . 14g36.4 Performance criteria for Transient phenomena applied to Receivers (TR) 14g36.5 Performance criteria for ancillary equipment tested on a stand alone basis . 14g37 Applicability overview . 15g37.1 Emission . 15g37.1.1 General 15g3ETSI ETSI EN 301 489-5 V2.1.1 (2016-11)

17、4 7.1.2 Special conditions . 15g37.2 Immunity 15g37.2.1 General 15g37.2.2 Special conditions . 15g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 16g3Annex B (informative): Examples of PMR equipment in the scope of the present

18、document 18g3B.1 Introduction 18g3B.2 Non-integral antenna PMR equipment . 18g3B.3 Integral antenna PMR equipment . 18g3B.4 Narrowband channel non-integral PMR equipment . 18g3B.5 Mobile, base station, and portable equipment of TErrestrial Trunked Radio (TETRA) equipment 19g3Annex C (informative): B

19、ibliography . 20g3History 21g3ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and

20、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).

21、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present

22、 document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.3 to provide one voluntar

23、y means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the

24、 European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regu

25、lations. The present document is part 5 of a multi-part deliverable. Full details of the entire series can be found in part 1 1. National transposition dates Date of adoption of this EN: 19 July 2016 Date of latest announcement of this EN (doa): 31 October 2016 Date of latest publication of new Nati

26、onal Standard or endorsement of this EN (dop/e): 30 April 2017 Date of withdrawal of any conflicting National Standard (dow): 30 April 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to b

27、e interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 6 1 Scope The present document, together with E

28、TSI EN 301 489-1 1, covers the assessment of Private land Mobile Radio (PMR) and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). The present document covers both analogue and digital Private land Mobile Radio (PMR) equipment. Technical specifications related to the

29、 antenna port and emissions from the enclosure port of Private land Mobile Radio (PMR) equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applica

30、ble test conditions, performance assessment and performance criteria for Private land Mobile Radio (PMR) equipment and associated ancillary equipment. Examples of Private Mobile Radio equipment are given in annex B. In case of differences (for instance concerning special conditions, definitions, abb

31、reviations) between the present document and ETSI EN 301 489-1 1, the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 1, except for any special conditions i

32、ncluded in the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version

33、of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI

34、cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 301 489-1 (V2.1.1) (11-2016): “ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harm

35、onised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU“. 2 ETSI EN 300 394-1 (V3.3.1) (04-2015): “Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio“. 3 ETSI EN

36、 300 395-2 (V1.3.1) (01-2005): “Terrestrial Trunked Radio (TETRA); Speech codec for full-rate traffic channel; Part 2: TETRA codec“. 4 ETSI EN 300 392-2 (V3.4.1) (08-2010): “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. 5 ETSI EN 300 396-2 (V1.4.1) (11-2011):

37、 “Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 2: Radio aspects“. ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 7 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-

38、specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long

39、 term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the harmonisation of the laws

40、 of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI EN 302 561: “Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150

41、kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.3 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunicat

42、ions Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.4 ETSI ETS 300 086: “Radio Equipment and Systems (RES); Land mobile group; Technical characteristics and test conditions for radio equipment with an internal or ext

43、ernal RF connector intended primarily for analogue speech“. i.5 ETSI I-ETS 300 219: “Radio Equipment and Systems (RES); Land mobile service; Technical characteristics and test conditions for radio equipment transmitting signals to initiate a specific response in the receiver“. i.6 ETSI EN 300 113: “

44、Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.7 ETSI EN 300 296: “La

45、nd Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.8 ETSI EN 300 341: “Land Mobile Service; Radio equipment using an integral antenna transmitting si

46、gnals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.9 ETSI EN 300 390: “Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Har

47、monised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.10 ETSI EN 301 166: “Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonis

48、ed Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. ETSI ETSI EN 301 489-5 V2.1.1 (2016-11) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 301 489-1 1, clause 3, apply. 3.

49、2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI EN 301 489-1 1, clause 3 and the following apply: BER Bit Error Ratio CR Continuous phenomena applied to Receivers CT Continuous phenomena applied to Transmitters EUT Equipment Under Test PMR Private land Mobile Radio TR Transient phenomena applied to Receivers TT Transient phenomena applied to Transmitters 4 Test conditions 4.1 General For the purposes of the present document, the test conditions of ETSI EN 301 489-1 1, clause 4 shall app