ETSI EN 301 502-2015 Global System for Mobile communications (GSM) Harmonized EN for Base Station Equipment covering the essential requirements of article 3 2 of the R&TTE Directiv.pdf

1、 ETSI EN 301 502 V12.1.1 (2015-03) Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the

2、 ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the

3、updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The update to version 12.1.1 of the present document includes the follow

4、ing major changes: Inclusion of BTS equipment supporting operation in the ER-GSM 900 band. The present document has been produced by ETSI in response to mandate M/284 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.5. The title and reference to the

5、 present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.2. The requirements relevant to Directive 1999/5/EC i.2 are summarized in annex A. National transposition dat

6、es Date of adoption of this EN: 24 February 2015 Date of latest announcement of this EN (doa): 31 May 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 November 2015 Date of withdrawal of any conflicting National Standard (dow): 30 November 2016 Modal ver

7、bs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT al

8、lowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R Universal Mobile Tele

9、communications System (UMTS); LTE; Vocabulary for 3GPP Specifications (3GPP TR 21.905 version 12.0.0 Release 12)“. 2 ETSI TS 151 021 (V12.2.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (3GPP TS 51.021 version 1

10、2.2.0 Release 12)“. ETSI ETSI EN 301 502 V12.1.1 (2015-03) 9 3 ETSI TS 145 002 (V12.2.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 12.2.0 Release 12)“. 4 ETSI TS 145 004 (V12.0.0) (10-2014): “Digital

11、cellular telecommunications system (Phase 2+); Modulation (3GPP TS 45.004 version 12.0.0 Release 12)“. 5 ETSI TS 145 005 (V12.3.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Radio Transmission and reception (3GPP TS 45.005 version 12.3.0 Release 12)“. 6 Void. 7 ETSI TS 145 01

12、0 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronization (3GPP TS 45.010 version 12.0.0 Release 12)“. 8 Void. 9 Void. 10 ETSI EN 300 019-1-0 (V2.1.2) (09-2003): “Environmental Engineering (EE); Environmental conditions and environmental tests for

13、 telecommunications equipment; Part 1-0: Classification of environmental conditions; Introduction“. 11 ETSI EN 300 019-1-3 (V2.4.1) (04-2014): “Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-3: Classification of environmental

14、 conditions; Stationary use at weatherprotected locations“. 12 ETSI EN 300 019-1-4 (V2.2.1) (04-2014): “Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weath

15、erprotected locations“. 13 Void. 14 Void. 15 ETSI TS 124 022 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Radio Link Protocol (RLP) for circuit switched bearer and teleservices (3GPP TS 24.022 version 12.0.0 Release 1

16、2)“. 16 ETSI TS 148 020 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS-MSC) interface (3GPP TS 48.020 version 12.0.0 Release 12)“. 17 Recommendation ITU-T O.153 (10-1992): “Basic Parameters

17、 for the measurement of error performance at bit rates below the primary rate“. 18 Recommendation ITU-R SM.329-12 (09-2012): “Unwanted emissions in the spurious domain“. 19 Void. 20 Void. 21 Void. 22 ETSI EN 300 019-2-3 (V2.3.1) (04-2013): “Environmental Engineering (EE); Environmental conditions an

18、d environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations“. 23 ETSI EN 300 019-2-4 (V2.3.1) (08-2013): “Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications e

19、quipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations“. 24 IEC EN 60721-1 (ed.2.2, 10-2002): “Classification of environmental conditions: Part 1: Environmental parameters and their severities“. 25 IEC EN 60721-2-1 (ed.2.0, 06-2013): “Classificatio

20、n of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity“. ETSI ETSI EN 301 502 V12.1.1 (2015-03) 10 26 IEC EN 60721-2-4 (ed.1.1, 10-2002): “Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature -

21、Solar radiation and temperature“. 27 IEC EN 60721-3-0 (ed.1.1, 10-2002): “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction“. 28 ETSI EN 301 908-1 (V6.2.1) (04-2013): “IMT cellular networks; Harmonized EN cov

22、ering the essential requirements of article 3.2 of the R Part 1: Introduction and common requirements“. 29 ETSI EN 301 908-18 (V7.1.2) (07-2014): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio

23、(MSR) Base Station (BS)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced

24、document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the

25、user with regard to a particular subject area. i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of

26、the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of Harmonized Standards for application under the R General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS

27、) interface; Radio Link Control / Medium Access Control (RLC/MAC) protocol (3GPP TS 44.060 version 12.2.0 Release 12)“. i.7 CEPT/ERC/Recommendation 74-01E (01-2011): “Unwanted emissions in the spurious domain“. i.8 ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): “Electromagnetic compatibility and Ra

28、dio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. i.9 ETSI TS 145 001 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Physical layer on the radio path; General description (3GPP TS 45.001 version 12.0.0 Release 12)“.

29、 i.10 ETSI TR 145 050 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Background for Radio Frequency (RF) requirements (3GPP TR 45.050 version 12.0.0 Release 12)“. ETSI ETSI EN 301 502 V12.1.1 (2015-03) 11 3 Definitions and abbreviations 3.1 Definitions For the purposes

30、of the present document, the terms and definitions given in TR 121 905 1 and the following apply: 8-PSK: Modulation type as defined in TS 145 004 4, clause 3. 16-QAM: Modulation type as defined in TS 145 004 4, clause 4 for EGPRS2-A and clause 5 for EGRPS2-B. 32-QAM: Modulation type as defined in TS

31、 145 004 4, clause 4 for EGPRS2-A and clause 5 for EGRPS2-B. ancillary RF amplifier: piece of equipment, which when connected by RF coaxial cables to the BTS, has the primary function to provide amplification between the transmit and/or receive antenna connector of a BTS and an antenna without requi

32、ring any control signal to fulfil its amplifying function AQPSK: Modulation type as defined in TS 145 004 4, clause 6. base station RF bandwidth: instantaneous bandwidth in which a BTS belonging to a multicarrier BTS class transmits or transmits and receives multiple carriers simultaneously Base Sta

33、tion System Test Equipment (BSSTE): See annex B in TS 151 021 2. BSS: BTS or integrated BSS NOTE: If a separate BSC is required to perform tests on a BTS, the BSC may be regarded as test equipment and the environmental conditions of the BSC need not be controlled. carrier frequency: centre of the AR

34、FCN under test circuit switched logical channels: all the standard GSM logical channels, including traffic channels (TCH), common control channels (RACH) and dedicated control channels (SDCCH, SACCH) E-GSM: extended GSM 900 band (includes P-GSM band) ECSD: any subset of the E-TCH traffic channels an

35、d related control channels EGPRS: any subset of the packet traffic channels PDTCH/MCS-1 to MCS-9 and related control channels EGPRS2: any of EGPRS2-A and EGPRS2-B EGPRS2-A: packet traffic channels utilizing any subset of the packet traffic channels MCS-1 to 6 and PDTCH/UAS-7 to UAS-11 in uplink, tog

36、ether with MCS-1 to 4 and PDTCH/DAS-5 to DAS-12 in downlink, and related control channels NOTE: In addition, MCS-7 and MCS-8 may be used in downlink when either the USF or the PAN or both are addressed to one or more EGPRS mobile stations. EGPRS2-B: packet traffic channels utilizing any subset of th

37、e packet traffic channels MCS-1 to 4 and PDTCH/UBS-5 to UBS-12 in uplink, together with MCS-1 to 4 and PDTCH/DBS-5 to DBS-12 in downlink, and related control channels NOTE: In addition, MCS-6 to MCS-9, DAS-5, DAS-6, DAS-8, DAS-9, DAS-10 pad, DAS-11, and DAS-12pad may be used in downlink under the co

38、nditions specified in TS 144 060 i.6. enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the

39、provisions of the present document ER-GSM 900: extended Railway GSM 900 band (includes R-GSM band) GMSK: Modulation type as defined by TS 145 004 4, clause 2. GPRS: any subset of the packet traffic channels PDTCH/CS-1 to CS-4 and related control channels ETSI ETSI EN 301 502 V12.1.1 (2015-03) 12 GSM

40、: unless otherwise specified, references to GSM include GSM 400, GSM 900, ER-GSM 900 and DCS 1 800 GSM 400: unless otherwise specified, references to GSM 400 include GSM 450 and GSM 480 band GSM 900: unless otherwise specified, references to GSM 900 include P-GSM, E-GSM and R-GSM band GSM-R: GSM Rai

41、lway communication, operated in the R-GSM or ER-GSM band, respectively Local Area (LA) multicarrier BTS: class of multicarrier BTS with both multicarrier transmitter and multicarrier receiver, characterized by requirements derived from pico cell scenarios manufacturer: in the present document, a ref

42、erence to a manufacturer also applies to an agent of the manufacturer maximum base station RF bandwidth: maximum bandwidth in which a BTS belonging to a multicarrier BTS class transmits or transmits and receives multiple carriers simultaneously maximum transmit filter bandwidth: maximum bandwidth of

43、 the duplexer or the transmit filter used in a BTS belonging to a multicarrier BTS class transmitting carriers simultaneously Medium Range (MR) multicarrier BTS: class of multicarrier BTS with both multicarrier transmitter and multicarrier receiver, characterized by requirements derived from micro c

44、ell scenarios micro-BTS: low-power BTS with performance requirements defined in TS 145 005 5 NOTE: In the present document, this also includes a BSS which incorporates a micro-BTS. minimum carrier frequency spacing: minimum spacing between the centre frequencies of simultaneously transmitted or rece

45、ived GSM carriers of a BTS belonging to a multicarrier BTS class NOTE: The minimum carrier frequency spacing is 600 kHz. multicarrier BTS: BTS, characterized by the ability to, in addition to single carrier operation, process two or more carriers in common active components simultaneously multicarri

46、er BTS equipped with multicarrier receiver: subgroup of multicarrier BTS, characterized by the ability to, in addition to single carrier operation, process two or more carriers in common active components simultaneously, in both multicarrier transmitter and multicarrier receiver normal BTS: any BTS

47、or BSS as defined by TS 145 005 5 which is not a micro-BTS, pico-BTS or multicarrier BTS operating band: transmit and receive operating bands together comprise the frequency band supported by the BSS NOTE: As defined in clause B.1.2. P-GSM: primary GSM 900 band packet switched logical channels: all

48、the General Packet Radio Services (GPRS) packet data logical channels, including packet traffic channels (PDTCH and PACCH) and packet common control channels (PRACH) pico-BTS: low-power BTs with performance requirements defined in TS 145 005 5 NOTE: In the present document, this also includes a BSS

49、which incorporates a pico-BTS. port: particular interface, of the specified equipment (apparatus), with the electromagnetic environment QPSK: modulation type as defined TS 145 004 clause 5 4, used in EGPRS2-B R-GSM: Railways GSM 900 band (includes P-GSM band and E-GSM band) radio digital unit: equipment which contains base band and functionality for controlling radio unit radio equipment: equipment which contains radio digital unit and radio unit radio unit: equipment which contains transmitt