ETSI EN 301 502-2017 Global System for Mobile communications (GSM) Base Station (BS) equipment Harmonised Standard covering the essential requirements of article 3 2 of Directive 2.pdf

1、 ETSI EN 301 502 V12.5.2 (2017-03) Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 502 V12.5.2 (2017-03) 2 Reference REN/MSG-0019-R

2、ED-C1 Keywords base station, cellular, ER-GSM, GSM, R-GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Import

3、ant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written a

4、uthorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sho

5、uld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the fo

6、llowing services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PD

7、F version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI

8、registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 502 V12.5.2 (2017-03) 3 Contents Int

9、ellectual Property Rights 7g3Foreword . 7g3Modal verbs terminology 7g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 10g33 Definitions, symbols and abbreviations . 11g33.1 Definitions 11g33.2 Symbols 13g33.3 Abbreviations . 13g34 Technical require

10、ments specifications . 15g34.1 Environmental profile . 15g34.2 Conformance requirements 15g34.2.0 General 15g34.2.1 Introduction. 15g34.2.2 Mean transmitted RF carrier power 16g34.2.2.1 Definition 16g34.2.2.2 Limit 16g34.2.2.3 Conformance . 17g34.2.3 Void 17g34.2.4 Adjacent channel power 17g34.2.4.0

11、 General 17g34.2.4.1 Spectrum due to modulation and wideband noise . 17g34.2.4.1.1 Definition. 17g34.2.4.1.2 Limit 17g34.2.4.1.3 Conformance . 19g34.2.4.2 Switching transients spectrum . 20g34.2.4.2.1 Definition. 20g34.2.4.2.2 Limit 20g34.2.4.2.3 Conformance . 20g34.2.5 Spurious emissions from the t

12、ransmitter antenna connector . 20g34.2.5.0 General 20g34.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 20g34.2.5.1.1 Definition. 20g34.2.5.1.2 Limit 20g34.2.5.1.3 Conformance . 20g34.2.5.2 Conducted spurious emissions from the transmitter a

13、ntenna connector, outside the BTS transmit band . 21g34.2.5.2.0 General 21g34.2.5.2.1 Definition. 21g34.2.5.2.2 Limit 21g34.2.5.2.3 Conformance . 22g34.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band 22g34.2.5.3.0 General 22g34.2.5

14、.3.1 Definition. 22g34.2.5.3.2 Limit 22g34.2.5.3.3 Conformance . 22g34.2.6 Intermodulation attenuation 22g34.2.6.1 Definition 22g34.2.6.2 Limit 23g3ETSI ETSI EN 301 502 V12.5.2 (2017-03) 4 4.2.6.2.1 For BTS not belonging to a multicarrier BTS class . 23g34.2.6.2.2 For BTS belonging to a multicarrier

15、 BTS class . 23g34.2.6.3 Conformance . 23g34.2.7 Intra Base Station System intermodulation attenuation 24g34.2.7.1 Definition 24g34.2.7.2 Limit 24g34.2.7.2.1 For BTS not belonging to a multicarrier BTS class . 24g34.2.7.2.2 For BTS belonging to a multicarrier BTS class . 24g34.2.7.3 Conformance . 24

16、g34.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 24g34.2.8.1 Definition 24g34.2.8.2 Limit 24g34.2.9 Static Reference Sensitivity Level 26g34.2.9.1 Definition 26g34.2.9.2 Limit 26g34.2.9.3 Conformance . 27g34.2.10 Void 27g34.2.11 Reference Interference Leve

17、l 27g34.2.11.1 Definition 27g34.2.11.2 Limit 28g34.2.11.3 Conformance . 34g34.2.12 Blocking Characteristics . 34g34.2.12.0 General 34g34.2.12.1 Definition 35g34.2.12.2 Limit 35g34.2.12.2.1 Blocking 35g34.2.12.2.2 Spurious response 36g34.2.12.3 Conformance . 36g34.2.13 Intermodulation characteristics

18、 . 36g34.2.13.1 Definition 36g34.2.13.2 Limit 36g34.2.13.3 Conformance . 36g34.2.14 AM suppression 36g34.2.14.1 Definition 36g34.2.14.2 Limit 36g34.2.14.3 Conformance . 37g34.2.15 Spurious emissions from the receiver antenna connector . 37g34.2.15.0 General 37g34.2.15.1 Definition 37g34.2.15.2 Limit

19、 37g34.2.15.3 Conformance . 37g34.2.16 Radiated spurious emissions . 37g34.2.16.0 General 37g34.2.16.1 Definition 37g34.2.16.2 Limit 37g34.2.16.3 Conformance . 37g35 Testing for compliance with technical requirements 38g35.1 Environmental conditions for testing . 38g35.2 Interpretation of the measur

20、ement results 38g35.3 Essential radio test suites 39g35.3.0 General 39g35.3.1 Void 39g35.3.2 Mean transmitted RF carrier power 39g35.3.2.1 Test case 39g35.3.2.2 Test Environment 40g35.3.3 Void 41g35.3.4 Adjacent channel power 41g35.3.4.1 Spectrum due to modulation and wideband noise . 41g35.3.4.1.1

21、Test case 41g35.3.4.1.2 Test Environment 41g35.3.4.2 Switching transients spectrum . 42g3ETSI ETSI EN 301 502 V12.5.2 (2017-03) 5 5.3.4.2.1 Test case 42g35.3.4.2.2 Test Environment 43g35.3.5 Spurious emissions from the transmitter antenna connector . 43g35.3.5.1 Conducted spurious emissions from the

22、 transmitter antenna connector, inside the BTS transmit band . 43g35.3.5.1.1 Test case 43g35.3.5.1.2 Test Environment 43g35.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 44g35.3.5.2.0 General 44g35.3.5.2.1 For BTS not belonging to a multic

23、arrier BTS class . 44g35.3.5.2.2 For BTS belonging to a multicarrier BTS class . 45g35.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band 47g35.3.5.3.0 General 47g35.3.5.3.1 Test case 47g35.3.5.3.2 Test Environment 47g35.3.6 Intermodu

24、lation attenuation 47g35.3.6.1 Test case 47g35.3.6.2 Test Environment 49g35.3.7 Intra Base Station System intermodulation attenuation 49g35.3.7.1 Test case 49g35.3.7.2 Test Environment 50g35.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 50g35.3.8.1 Test cas

25、e 50g35.3.8.2 Test Environment 53g35.3.9 Static reference sensitivity level . 53g35.3.9.1 Test case 53g35.3.9.2 Test Environment 54g35.3.10 Void 54g35.3.11 Reference Interference Level 54g35.3.11.1 Test case 54g35.3.11.2 Test Environment 63g35.3.12 Blocking Characteristics . 63g35.3.12.0 General 63g

26、35.3.12.1 Test case 63g35.3.12.2 Test Environment 69g35.3.13 Intermodulation characteristics . 69g35.3.13.1 Test case 69g35.3.13.2 Test Environment 70g35.3.14 AM suppression 70g35.3.14.1 Test case 70g35.3.14.2 Test Environment 72g35.3.15 Spurious emissions from the receiver antenna connector . 72g35

27、.3.15.0 General 72g35.3.15.1 Test case 72g35.3.15.2 Test Environment 72g35.3.16 Radiated spurious emissions . 73g35.3.16.0 General 73g35.3.16.1 Test case 74g35.3.16.2 Test Environment 75g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 201

28、4/53/EU . 76g3Annex B (normative): General test conditions and declarations . 78g3B.1 Declaration by manufacturer 78g3B.1.0 General . 78g3B.1.1 Output power and determination of power class 78g3B.1.2 Specified frequency range 79g3B.1.3 Frequency hopping . 79g3ETSI ETSI EN 301 502 V12.5.2 (2017-03) 6

29、 B.1.4 Void 79g3B.1.5 Downlink discontinuous transmission (DTX) 79g3B.2 BTS Configurations 80g3B.2.0 General . 80g3B.2.1 Receiver diversity . 80g3B.2.2 Duplexers . 80g3B.2.3 Power supply options . 81g3B.2.4 Ancillary RF amplifiers 81g3B.2.5 BSS using antenna arrays . 82g3B.2.6 BTS supporting 8-PSK m

30、odulation 83g3B.2.7 BTS supporting additional modulations in EGPRS2 83g3B.2.8 Supported Symbol Rate 83g3B.2.9 Support of RTTI and/or FANR 83g3B.2.10 Multicarrier BTS 84g3B.2.11 BTS supporting VAMOS . 85g3B.2.12 BTS supporting ER-GSM 85g3Annex C (normative): Test environments 86g3C.0 General . 86g3C.

31、1 Normal test environment 86g3C.2 Extreme test environment . 86g3C.2.0 General . 86g3C.2.1 Extreme temperature 86g3C.3 Void 87g3C.4 Power supply 87g3Annex D (informative): Void . 88g3Annex E (informative): Change History 89g3History 90g3ETSI ETSI EN 301 502 V12.5.2 (2017-03) 7 Intellectual Property

32、Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essent

33、ial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried ou

34、t by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical

35、 Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.10 to provide one voluntary means of conforming to the ess

36、ential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Direc

37、tive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition

38、 dates Date of latest announcement of this EN (doa): 30 June 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 December 2017 Date of withdrawal of any conflicting National Standard (dow): 31 December 2017 Modal verbs terminology In the present document “s

39、hall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when us

40、ed in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.1. The present document is produced following the guidance in ETSI EG

41、203 336 i.2 as applicable. ETSI ETSI EN 301 502 V12.5.2 (2017-03) 8 1 Scope The present document applies to the following radio equipment type: 1) GSM base stations. Table 1-1: GSM Base Station System frequency bands GSM band Direction of transmission GSM Base Station System relevant frequency bands

42、 P-GSM 900 Transmit 935 MHz to 960 MHz Receive 890 MHz to 915 MHz E-GSM 900 Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz R-GSM 900 Transmit 921 MHz to 960 MHz Receive 876 MHz to 915 MHz ER-GSM 900 Transmit 918 MHz to 960 MHz Receive 873 MHz to 915 MHz DCS 1 800 Transmit 1 805 MHz to 1 880

43、MHz Receive 1 710 MHz to 1 785 MHz GSM 450 Transmit 460,4 MHz to 467,6 MHz Receive 450,4 MHz to 457,6 MHz GSM 480 Transmit 488,8 MHz to 496 MHz Receive 478,8 MHz to 486 MHz The present document contains requirements aiming to demonstrate that that radio equipment both effectively uses and supports t

44、he efficient use of radio spectrum in order to avoid harmful interference. In regards to interference to systems operating in adjacent bands guidance for single carrier BTS and multicarrier BTS is provided in ECC Report 146 i.3. 2 References 2.1 Normative references References are specific, identifi

45、ed by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were v

46、alid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 301 908-18 (V11.1.1) (07-2016): “IMT cellular networks; Harmonised Standard covering the essential requirements of

47、article 3.2 of the Radio Equipment Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“. 2 ETSI TS 151 021 (V12.3.0) (01-2015): “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Radio aspects (

48、3GPP TS 51.021 version 12.3.0 Release 12)“. 3 ETSI TS 145 002 (V12.4.0) (04-2015): “Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 12.4.0 Release 12)“. 4 ETSI TS 145 004 (V12.0.0) (10-2014): “Digital cellular telecomm

49、unications system (Phase 2+); Modulation (3GPP TS 45.004 version 12.0.0 Release 12)“. ETSI ETSI EN 301 502 V12.5.2 (2017-03) 9 5 ETSI TS 145 005 (V12.5.0) (04-2015): “Digital cellular telecommunications system (Phase 2+); Radio Transmission and reception (3GPP TS 45.005 version 12.5.0 Release 12)“. 6 ETSI TS 145 010 (V12.0.0) (10-2014): “Digital cellular telecommunications system (Phase 2+); Radio subsystem synchronization (3GPP TS 45.010 version 12.0.0 Release 12)“. 7 ETSI EN 300 019-1-0 (V2.1.2) (09-2003): “Environmental Engineering (EE); Environmen