ETSI EN 301 657-2003 Private Integrated Services Network (PISN) Specification functional model and information flows Private User Mobility (PUM) Call handling Additional Network Fe.pdf

1、 ETSI EN 301 657 V1.2.1 (2003-06)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Specification, functional model and information flows;Private User Mobility (PUM);Call handling Additional Network Features (ANFs)ISO/IEC 17877 (2000) modifiedETSI ETSI EN 301 65

2、7 V1.2.1 (2003-06) 2 Reference REN/ECMA-00257 Keywords endorsement, PISN, PUM, ANF, stage 1, stage 2, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non luc

3、ratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived differenc

4、e in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that t

5、he document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part ma

6、y be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of

7、 its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 657 V1.2.1 (2003-06) 3 Intellectual Property

8、 Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essen

9、tial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has

10、been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been

11、 produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrate

12、d Services Digital Network (ISDN) concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the Private User Mobility Incoming Call (PUMI) and the Private User Mobility Outgoing Call (PUMO) a

13、dditional network features. The present document endorses an International Standard, ISO/IEC 17877. National transposition dates Date of adoption of this EN: 13 June 2003 Date of latest announcement of this EN (doa): 30 September 2003 Date of latest publication of new National Standard or endorsemen

14、t of this EN (dop/e): 31 March 2004 Date of withdrawal of any conflicting National Standard (dow): 31 March 2004 Endorsement notice The elements of International Standard ISO/IEC 17877 (2000) apply, with the following modifications. ETSI ETSI EN 301 657 V1.2.1 (2003-06) 4 Clause 3 Replace the first

15、paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequ

16、ent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 11 ETS

17、I EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998), modified“. 12 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modi

18、fied“. 13 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 14 ETSI ETS 300 256: “Private Integrated Services Network (PISN); Specification, functional models and informa

19、tion flows; Diversion supplementary services“. 15 ETSI EN 301 824: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal location registration supplementary service and wireless terminal information exchange additional network feature I

20、SO/IEC 15428 (1999) modified“. 16 ETSI EN 301 822: “Private Integrated Services Network (PISN); Specification, functional models and information flows; Private User Mobility (PUM); Registration supplementary service ISO/IEC 17875 (2000), modified“. 17 ETSI ETS 300 387 (1994): “Private Telecommunicat

21、ion Network (PTN); Method for the specification of basic and supplementary services“. Throughout the text of ISO/IEC 17877 Replace references as shown in the table below. Reference in ISO/IEC 17877 Modified reference ISO/IEC 11571 EN 300 189 11 ISO/IEC 11574 EN 300 171 12 ISO/IEC 11579-1 ETS 300 475

22、-1 13 ISO/IEC 13872 ETS 300 256 14 ISO/IEC 15428 EN 301 824 15 ISO/IEC 17875 EN 301 822 16 CCITT Rec. I.130 ETS 300 387 17 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 657 V1.2.1 (2003-06) 5 History Document history V1.1.1 October 2000 Publication V1.2.1 February 2003 One-step Approval Procedure OAP 20030613: 2003-02-12 to 2003-06-13 V1.2.1 June 2003 Publication