ETSI EN 301 783-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) Land Mobile Service Commercially available amateur radio equipment Part 2 Harmonized EN coveri_1.pdf

1、 ETSI EN 301 783-2 V1.2.1 (2010-07)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Land Mobile Service;Commercially available amateur radio equipment;Part 2: Harmonized EN covering the essential requirementsof article 3.2 of the

2、R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searche

3、s, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunication

4、s series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC i.2 (as amended) laying down a procedur

5、e for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC i.1 of the Europe

6、an Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Land Mobile Service; Commercially available amateur radio equipment, as identified below: Part 1: “Technical characteristics and method

7、s of measurement“; Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R Land Mobile Service; Commercially available amateur radio equipment; Part 1: Technical characteristics and methods of measurement“. 2.2 Informative references The following referenced documents are

8、not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications equipment and the mutual recognition of their c

9、onformity (R it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it qualifies each requirement to be either: - Unconditional: m

10、eaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependant on the manufacturer having chosen to support optional functionality defined within the schedule. in the case of Conditional requirements, it associates the requirement with the parti

11、cular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with the referenced procedures; - Other: meaning that the t

12、est procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 301 783-2 The following requirements and test specifications are relevant to the presumpt

13、ion of conformity under the article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with satisfactory outcomes is a necessary condition for a

14、presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufacturers assertion supported by appropriate entries in

15、 the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly. Where no test is specified (that is, where the previous field is “X“) this field remains blank. ETSI ETSI EN 301 783-2

16、 V1.2.1 (2010-07) 11Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a larger number of languages for the translation of the titles of Harmonized Standards and mandated ENs that are to be listed in the

17、Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-approval application. ETSI ETSI EN 301 783-2 V1.2.1 (2010-07) 12Annex C (informative): Bibliography ETSI EG 201 399: “Electromagnetic c

18、ompatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive“. ETSI ETSI EN 301 783-2 V1.2.1 (2010-07) 13History Document history V1.1.1 September 2000 Publication V1.2.1 July 2009 Public Enquiry PE 20091119: 2009-07-22 to 2009-11-19 V1.2.1 April 2010 Vote V 20100626: 2010-04-27 to 2010-06-28 V1.2.1 July 2010 Publication