ETSI EN 301 811-1-1-2001 Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 Conformance Testing for the Packet Based Convergence Layer Part 1 Common Part Sub-Part 1 Protocol Im_1.pdf

1、ETSI EN 301 811-1-1 1.1.1 (2001-01) European Standard (Telecommunications series) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part; Sub-part 1 : Protocol Implementation Conformance Statement (PICS) proforma 2 ETS

2、I EN 301 811-1-1 V1.l.l (2001-01) Tt- Reference D EN/B RAN-0024T04- 1 - 1 Keywords access, HIPERLAN, PICS ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre

3、la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: present document may be made available in more than one electronic version or in print. In any case of existing perceived difference in contents between such versions, the r

4、eference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or

5、change of status. Information on the current status of this and other ETSI documents is available at :/.$./$/ If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright an

6、d the foregoing restriction extend to reproduction in all media. 8 European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI EN 301 811-1-1 V1.l.l (2001-01) Contents Intellectual Property Rights 4 Foreword 4 Introduction 4 1 Scope 5 2 References 5 3 Definitions and abbre

7、viations 5 3.1 Definitions 5 3.2 Abbreviations 6 4 Conformance to this PICS proforma specification . 6 Annex A (normative): Protocol ICs proforma for TS 101 493-1 7 A . 1 Guidance for completing the PICS proforma . 7 A.l.l Purposes and structure . 7 A.1.2 Abbreviations and conventions 7 A.1.3 Instru

8、ctions for completing the PICS proforma 9 A.2 Identification of the implementation 10 A.2.1 Date of the statement . 10 A.2.2 Implementation Under Test (IUT) identification 10 A.2.3 System Under Test (SUT) identification 10 A.2.4 Product supplier 10 A.2.5 Client (if different from product supplier) 1

9、1 A.2.6 PICS contact person 11 A.3 Identification of the TS 101 493-1 V1.l.l . 12 A.4 Global statement of conformance 12 AS Roles 12 A.6 PICS for Mobile Terminal MT or Access Point AP . 13 A.6.1 Major capabilities 13 A.6.1.1 Common Part Convergence Sublayer procedures 13 A.6.1.1.1 Common Part Conver

10、gence Sublayer - send mode . 13 A.6.1.1.2 Common Part Convergence Sublayer - receive mode . 13 A.6.1.2 Segmentation and Re-assembly procedures . 14 A.6.1.2.1 Segmentation and Re-assembly - send mode . 14 A.6.1.2.2 Segmentation and Re-assembly - receive mode . 14 A.6.2 PDUs 14 A.6.2.1 CPCS-PDU descri

11、ptions 14 A.6.2.2 SAKPDU descriptions 14 A.6.3 PDUparameters 15 A.6.3.1 Parameters of CPCS-PDUs 15 A.6.3.2 Parameters of SAR-PDUs 15 A.6.3.3 Miscellaneous parameters 15 History . 16 ETSI 4 ETSI EN 301 811-1-1 V1.l.l (2001-01) Intellectual Property Rights IPRs essential or potentially essential to th

12、e present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI

13、 in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server ClattD:/www.etsP.c/iDr. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the exist

14、ence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Broadband Radio Access Networks (BRAN). T

15、he present document is sub-part 1 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer; Part 1: Common part, as identified below: Sub-part 1: “Protocol Implementation Conformance Statement (PICS) prof

16、orma“; Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) specification“. National transposition dates Date of adoption of this EN Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN

17、(dop/e): Date of withdrawal of any conflicting National Standard (dow): 19 January 2001 30 April 2001 31 October 2001 31 October 2001 Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a

18、 telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). ETSI 5 ETSI EN 301 811-1-1 V1.l.l (2001-01) 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the packet based convergence la

19、yer for HIPERLAN 2; Part 1: Common part, as defined in TS 101 493-1 i in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ETS 300 406 2. It details in tabular form the implementation options, i.e. the optional functions additional

20、to those which are mandatory to implement. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present documen t. References are either specific (identified by date of publication, edition number, version number, etc.) or non-sp

21、ecific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 111 ETSI TS 101 493-1 (Vl.l.1): “Broadband Radio A

22、ccess Networks (BRAN); HIPERLAN Type 2; Packet based Convergence Layer; Part 1: Common Part“. ETSI ETS 300 406 (1995): “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646-1: “Information technology - Open S

23、ystems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 121 131 141 3 3.1 Definitions a

24、nd abbreviations Def i n it ions For the purposes of the present document, the following terms and definitions apply: - - terms defined in TS 101 493-1 i; terms defined in ISO/IEC 9646-1 3 and in ISO/IEC 9646-7 4. In particular, the following terms, defined in ISOAEC 9646-1 3, apply: Implementation

25、Conformance Statement (ICs): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICs can take several forms: protocol ICs, profile ICs, profile specific ICs, information object ICs, etc ICs p

26、roforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICs Protocol ICs (PICS): ICs for an implementation or system claimed to conform to a given protocol specification ETSI 6 ETSI EN 301 811-1-1 V1.l.l (2001-01) 3.2 Abbreviations For the p

27、urposes of the present document, the following abbreviations apply: AP cc CL CPCS DLC EC ICs IUT MT MTU PAD PDU PICS SAR SCS SUT T-RAS Access Point Central Controller Convergence Layer Common Part Convergence Sublayer Data Link Control Error Control Implementation Conformance Statement Implementatio

28、n Under Test Mobile Terminal Maximum Transmission Unit Packet AssemblyAIisassembly facility Protocol Data Unit Protocol ICs Segmentation and Re-assembly System Conformance Statement System Under Test Re-Assembly Timer 4 Conformance to this PICS proforma specification If it claims to conform to the p

29、resent document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in Annex A, and shall preserve the numberinghaming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PI

30、CS proforma completed in accordance with the guidance for completion given in Clause A. 1. ETSI 7 ETSI EN 301 811-1-1 V1.l.l (2001-01) Annex A (normative): Protocol ICs proforma for TS 101 493-1 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI

31、grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.l Guidance for completing the PICS proforma A.1 .I Purposes and structure The purpose of this PICS proforma is

32、 to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 101 493-1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into subclauses for the following categories of information: - - identification of th

33、e implementation; - identification of the TS 101 493-1; - global statement of conformance; - roles; guidance for completing the PICS proforma; - major capabilities; - PDUS; - PDU parameters. A. 1.2 Abbreviations and conventions The PICS proforma contained in this Annex is comprised of information in

34、 tabular form in accordance with the guidelines presented in ISO/IEC 9646-7. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It impli

35、citly means “is supported by the implementation?“. ETSI 8 ETSI EN 301 811-1-1 V1.l.l (2001-01) Status column The following notations, defined in ISO/IEC 9646-7, are used for the status column: m O n/a X mandatory - the capability is required to be supported; optional - the capability may be supporte

36、d or not; not applicable - in the given context, it is impossible to use the capability; prohibited (excluded) - there is a requirement not to use this capability in the given context; 0.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifie

37、s a unique group of related optional items and the logic of their selection which is defined immediately following the table; conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or Conditional items. “i“ is an integer identifying a unique

38、 conditional status expression which is defined immediately following the table; ci 1 irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“

39、 and “c“ statuses above. Reference column The reference column makes reference to TS 101 493-1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISOAEC 9646-7, are used for

40、 the support column: Y or y N or n N/A, n/a or - supported by the implementation; not supported by the implementation; no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-prof

41、ile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space

42、for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. EXAMPLE 1: NOTE 2: As stated in ISO/IEC 9646-7, support for a received PDU requires the ability

43、to parse all valid parameters ?3: IF prof1 THEN Y ELSE N of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. ETSI 9 ETSI EN 301 811-1-1 V1.l.l (2001-01) Values a

44、llowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: - list of values: example: example: example: - list of named values: example: - length: example: 5 20 , , ., 2,4,6 ,8,9 llOlB

45、, lOllB, 1111B OA“, 34H, 2F“ (), (), ., () reject(l), accept(2) size ( ) size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. Ref

46、erences to items For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. I

47、f there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 2: A34 is the reference to the answer of item 4 in Table AS of Annex A. EXAMPLE 3: A.6/3b is the reference to the second answer (i.e. in the second support column) of item

48、 3 in Table A.6 of Annex A. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.1.3 Instructions for completing the PICS

49、 proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in subclause A.1.2. However, the tables containing in “user role“ or “Mobile Terminal MT“ subclause shall only be completed for MT implementations, and the tables containing in “network role“ or “Access Point AP“ subclause shall only be completed for AP implementations. If necessary, the supp