ETSI EN 301 906-2003 Corporate Telecommunication Networks (CN) Signalling Interworking between QSIG and H 323 Call Diversion Supplementary Services (V1 1 1 ISO IEC 21411 (2001) Mod.pdf

1、ETSI EN 301 906 1.1.1 (2003-02) European Sfandard (Telecommunicafions series) Corporate telecommunication Networks (CN); Signalling interworking between QSIG and H.323; Call Diversion supplementary services ISO/IEC 2141 1 (2001) modified 2 ETSI EN 301 906 VI .I .I (2003-02) Reference DENIECMA-00273

2、Keywords H.323, PISN, endorsement, network, QSIG, supplementary service ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) N

3、o 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the referenc

4、e version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change

5、of status. Information on the current status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written perm

6、ission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade

7、 Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI EN 301 906 VI .I .I (2003-02) Intellectual Property Rights IPRs essential or potentially essential t

8、o the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to

9、ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This European Standard (Telecommun

10、ications series) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The

11、series uses the Integrated Services Digital Network (ISDN) concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document defines the signalling protocol intenvorking for call diversion supplementary servic

12、es between a Private Integrated Services Network (PISN) and a packet-based private telecommunications network based on the Internet Protocol (IP). It is further assumed that the protocol for the PISN part is that defined for the Q reference point (QSIG) and that the protocols for the IP-based networ

13、k are based on ITU-T Recommendation H.323. The present document endorses an International Standard, ISO/IEC 2141 1. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (d

14、op/e): Date of withdrawal of any conflicting National Standard (dow): 21 February 2003 3 1 May 2003 30 November 2003 30 November 2003 Endorsement notice The elements of International Standard ISO/IEC 2141 1 (2001) apply, with the following modifications. ETSI 4 Reference in ISOIIEC 21411 ISOAEC 1157

15、2 ISOAEC 11582 ISO/IEC 11579-1 ETSI EN 301 906 VI .I .I (2003-02) Mod if ied refe re n ce EN 300 172 I I ETS 300 239 i131 ETS 300 475-1 I21 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present

16、document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be p

17、ublicly available in the expected location might be found at iltr,:/docbox.etsi.orto/frii. Insert the following normative references at the end of clause 3 : 111 ETSI EN 300 172: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Circuit-mode basic services ISO/IEC 1157

18、2 (1996) modified“. ETSI ETS 300 475-1 : “Private Telecommunication Network (PTN); Reference configuration; Part 1: Reference configuration for PTN exchanges (PTNXs) ISO/IEC 11579-1 (1994), modified l. ETSI ETS 300 23 9: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol

19、; Generic functional protocol for the support of supplementary services ISO/IEC 11582 (1995), modified“. ETSI ETS 300 257: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Diversion supplementary services ISO/IEC 13873 (1995) modified“. ETSI TS 101 905: “Corporate Tel

20、ecommunication Networks (CN); Signalling interworking between QSIG and H.323; Generic functional protocol for the support of supplementary services“. 121 i31 i41 i51 Throughout the text of ISO/IEC 2141 1 LA ISOAEC 13873 ISOAEC 21409 IETS 300 257 I41 ITS 101 905 I51 Replace the term “this International Standard by “the present document“. ETSI 5 ETSI EN 301 906 VI .I .I (2003-02) vl.l.l vl.l.l History October 2002 One-step Approval Procedure OAP 20030221: 2002-10-23 to 2003-02-21 February 2003 Publication ETSI