ETSI EN 301 908-1-2016 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU Part 1 Introduction and common requi.pdf

1、 ETSI EN 301 908-1 V11.1.1 (2016-07) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-1 V11.1.1 (2016-07)2 Reference REN/MSG-TFES-1

2、1-01-RED Keywords 3G, 3GPP, 3GPP2, cdma2000, cellular, digital, E-UTRA, IMT, IMT-2000, IMT-Advanced, LTE, LTE-Advanced, MAN-Advanced, mobile, radio, regulation, UMTS, UTRA, WCDMA, WiMAX ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16

3、 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in prin

4、t. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Po

5、rtable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/por

6、tal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electron

7、ic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecom

8、munications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and

9、 the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 908-1 V11.1.1 (2016-07)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 5g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6

10、g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 9g34 Technical requirements specifications . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 10g34.2.1 Introduction. 10g34.2.2 Radiated emissions (UE) 11g34.2.2.1 Definition 11g34.2

11、.2.2 Limits 11g34.2.2.3 Conformance . 11g34.2.3 Radiated emissions (BS and repeater) 12g34.2.3.1 Definition 12g34.2.3.2 Limits 12g34.2.3.3 Conformance . 12g34.2.4 Control and monitoring functions (UE) 13g34.2.4.1 Definition 13g34.2.4.2 Limits 13g34.2.4.3 Conformance . 13g35 Testing for compliance wi

12、th technical requirements 13g35.1 Environmental conditions for testing . 13g35.2 Interpretation of the measurement results 13g35.3 Essential radio test suites 14g35.3.1 Radiated emissions (UE) 14g35.3.1.1 Test method . 14g35.3.1.2 Test configurations 14g35.3.2 Radiated emissions (BS and repeater) 15

13、g35.3.2.1 Test method . 15g35.3.2.2 Test configurations 16g35.3.3 Control and monitoring functions (UE) 16g35.3.3.1 Test method . 16g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 18g3Annex B (informative): Correct operation o

14、f the equipment . 19g3Annex C (informative): Overview and organization of ETSI EN 301 908 standard parts 20g3Annex D (informative): Bibliography . 24g3History 25g3ETSI ETSI EN 301 908-1 V11.1.1 (2016-07)4 Intellectual Property Rights IPRs essential or potentially essential to the present document ma

15、y have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI s

16、tandards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs no

17、t referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present

18、 document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.9 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the la

19、ws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given

20、in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 1 of a multi-part deliverable covering the essential requirements u

21、nder article 3.2 of the Directive 2014/53/EU for Base Stations (BS), Repeaters and User Equipment (UE) for IMT cellular networks, as identified below: Part 1: “Introduction and common requirements“; Part 2: “CDMA Direct Spread (UTRA FDD) User Equipment (UE)“; Part 3: “CDMA Direct Spread (UTRA FDD) B

22、ase Stations (BS)“; Part 4: “CDMA Multi-Carrier (cdma2000) User Equipment (UE)“; Part 5: “CDMA Multi-Carrier (cdma2000) Base Stations (BS)“; Part 6: “CDMA TDD (UTRA TDD) User Equipment (UE)“; Part 7: “CDMA TDD (UTRA TDD) Base Stations (BS)“; Part 8: “Harmonized EN for IMT-2000, TDMA Single-Carrier (

23、UWC 136) (UE) covering essential requirements of article 3.2 of the R Part 9: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R Part 10: “Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of ar

24、ticle 3.2 of the Directive 2014/53/EU“; Part 11: “CDMA Direct Spread (UTRA FDD) Repeaters“; Part 12: “CDMA Multi-Carrier (cdma2000) Repeaters; Part 13: “Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)“; Part 14: “Evolved Universal Terrestrial Radio Access (E-UTRA) Base Statio

25、ns (BS)“; ETSI ETSI EN 301 908-1 V11.1.1 (2016-07)5 Part 15: “Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters“; Part 16: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R Part 17: “H

26、armonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R Part 18: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“; Part 19: “OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE)“; P

27、art 20: “OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Station (BS)“; Part 21: “OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE)“; Part 22: “OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)“. National transposition dates Date of adoption of this EN: 20 April 2016 Date of latest announcement

28、of this EN (doa): 31 July 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should

29、 not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction T

30、he present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.1. The present document is produced following the guidance in ETSI EG 203 336 i.2 as applicable. ETSI ETSI

31、EN 301 908-1 V11.1.1 (2016-07)6 1 Scope The present document applies to user equipment, repeaters and base stations for IMT, falling within the scope of one of the other parts of ETSI EN 301 908 i.8, except for IMT-2000 FDMA/TDMA (DECT). The present document also covers the corresponding ancillary e

32、quipment. NOTE 1: ETSI EN 301 908-10 i.7 contains in particular requirements for radiated spurious emissions and control and monitoring functions applicable to IMT-2000 FDMA/TDMA (DECT) equipment. The present document includes technical requirements which are common to equipment falling within the s

33、cope of several of the other parts. NOTE 2: The other parts of ETSI EN 301 908 i.8, which are listed in the foreword of the present document, specify technical requirements in respect of a particular type of IMT equipment. NOTE 3: Recommendations ITU-R M.1457-12 i.4 and M.2012-1 i.5 define the chara

34、cteristics of the members of the IMT-2000 family and IMT-Advanced respectively by means of references to technical specifications developed by Standards Development organizations. The present document applies to equipment designed to meet any version of the terrestrial specifications referenced in R

35、ecommendations ITU-R M.1457-12 i.4 and M.2012-1 i.5. The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. 2 References 2.1 Normative references References are eith

36、er specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which

37、are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessar

38、y for the application of the present document. 1 Recommendation ITU-R SM.329-12 (09-2012): “Unwanted emissions in the spurious domain“. 2 ETSI EN 301 502 (V12.5.1) (07-2016): “Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requi

39、rements of article 3.2 of the Directive 2014/53/EU“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest

40、 version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI EN 301 908-1 V11.1.1 (2016-07)7 The following referenced documents are not neces

41、sary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European parliament and of the council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the ma

42、rket of radio equipment and repealing Directive 1999/5/EC. i.2 ETSI EG 203 336 (V1.1.1) (08-2015): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Di

43、rective 2014/53/EU“. i.3 ETSI TR 100 028 (all parts) (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. i.4 Recommendation ITU-R M.1457-12 (2015): “Detailed specifications of the terrestrial radio in

44、terfaces of International Mobile Telecommunications-2000 (IMT-2000)“. i.5 Recommendation ITU-R M.2012-1 (02-2014): “Detailed specifications of the terrestrial radio interfaces of International Mobile Telecommunications-Advanced (IMT-Advanced)“. i.6 Recommendation ITU-R SM.1539-1 (2002): “Variation o

45、f the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. i.7 ETSI EN 301 908-10 (V4.2.1) (10-2015): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (U

46、E) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU“. i.8 ETSI EN 301 908 (all parts): “IMT cellular networks; Harmonised Standard covering the essential require

47、ments of article 3.2 of the Directive 2014/53/EU“. i.9 Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in

48、support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: ancillary equipment: equipment (apparatus), used in connection with a User Equi

49、pment (UE), Repeater or Base Station (BS) is considered as an ancillary equipment (apparatus) if: the equipment is intended for use in conjunction with a user equipment UE, repeater or BS to provide additional operational and/or control features to the radio equipment, (e.g. to extend control to another position or location); and the equipment cannot be used on a stand-alone basis to provide user functions independently of a UE, BS or combination of BS and repeater; and the UE, BS or combination of BS and repeater to which it