ETSI EN 301 908-13-2015 IMT cellular networks Harmonised EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 13 Evolved Universal Terrestrial Radio Ac.pdf

1、 ETSI EN 301 908-13 V7.1.1 (2015-12) IMT cellular networks; Harmonised EN covering the essential requirements of article 3.2 of the R Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)2 Reference REN/

2、MSG-TFES-011-13 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, LTE-Advanced, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif

3、enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the presen

4、t document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network driv

5、e within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present d

6、ocument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by

7、 written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM

8、, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETS

9、I ETSI EN 301 908-13 V7.1.1 (2015-12)3 Contents Intellectual Property Rights 8g3Foreword . 8g3Modal verbs terminology 8g3Introduction 8g31 Scope 9g32 References 11g32.1 Normative references . 11g32.2 Informative references 12g33 Definitions, symbols and abbreviations . 13g33.1 Definitions 13g33.2 Sy

10、mbols 15g33.3 Abbreviations . 17g34 Technical requirements specifications . 18g34.1 Environmental profile . 18g34.2 Conformance requirements 18g34.2.1 Introduction. 18g34.2.2 Transmitter Maximum Output Power . 19g34.2.2.1 Transmitter maximum output power for Single Carrier 19g34.2.2.1.1 Definition.

11、19g34.2.2.1.2 Limits 19g34.2.2.1.3 Conformance . 19g34.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19g34.2.2.2.1 Definition. 19g34.2.2.2.2 Limits 20g34.2.2.2.3 Conformance . 20g34.2.2.3 Transmitter output power for UL-MIMO . 20g34.2.2.3.1 Definitio

12、n. 20g34.2.2.3.2 Limits 21g34.2.2.3.3 Conformance . 21g34.2.3 Transmitter Spectrum Emission Mask 21g34.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21g34.2.3.1.1 Definition. 21g34.2.3.1.2 Limits 21g34.2.3.1.3 Conformance . 23g34.2.3.2 Transmitter spectrum emission mask for intra-ban

13、d contiguous Carrier Aggregation (DL CA and UL CA) . 23g34.2.3.2.1 Definition. 23g34.2.3.2.2 Limits 23g34.2.3.2.3 Conformance . 24g34.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24g34.2.3.3.1 Definition. 24g34.2.3.3.2 Limits 24g34.2.3.3.3 Conformance . 24g34.2.3.4 Transmitter spectrum emi

14、ssion mask for Multi-Cluster PUSCH within a component carrier 24g34.2.3.4.1 Definition. 24g34.2.3.4.2 Limits 24g34.2.3.4.3 Conformance . 25g34.2.4 Transmitter Spurious Emissions . 25g34.2.4.1 Transmitter spurious emissions for Single Carrier 25g34.2.4.1.1 Definition. 25g34.2.4.1.2 Limits 25g34.2.4.1

15、.3 Conformance . 28g34.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 28g3ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)4 4.2.4.2.1 Definition. 28g34.2.4.2.2 Limits 28g34.2.4.2.3 Conformance . 30g34.2.4.3 Transmitter spurious emissions for UL-MIMO 30g3

16、4.2.4.3.1 Definition. 30g34.2.4.3.2 Limits 31g34.2.4.3.3 Conformance . 31g34.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31g34.2.4.4.1 Definition. 31g34.2.4.4.2 Limits 31g34.2.4.4.3 Conformance . 31g34.2.5 Transmitter Minimum Output Power 31g34.2.5.1 Tra

17、nsmitter minimum output power for Single Carrier. 31g34.2.5.1.1 Definition. 31g34.2.5.1.2 Limits 31g34.2.5.1.3 Conformance . 31g34.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 32g34.2.5.2.1 Definition. 32g34.2.5.2.2 Limits 32g34.2.5.2.3 Con

18、formance . 32g34.2.5.3 Transmitter minimum output power for UL-MIMO . 32g34.2.5.3.1 Definition. 32g34.2.5.3.2 Limits 32g34.2.5.3.3 Conformance . 32g34.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33g34.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier 33g34.2.6.1.1 Definition

19、. 33g34.2.6.1.2 Limits 33g34.2.6.1.3 Conformance . 33g34.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 34g34.2.6.2.1 Definition. 34g34.2.6.2.2 Limits 34g34.2.6.2.3 Conformance . 34g34.2.7 Receiver Blocking Characteristics 34g34.2.7.1 Receiver Blocking Cha

20、racteristics for Single Carrier . 34g34.2.7.1.1 Definition. 34g34.2.7.1.2 Limits 34g34.2.7.1.3 Conformance . 36g34.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 36g34.2.7.2.1 Definition. 36g34.2.7.2.2 Limits 36g34.2.7.2.3 Conformance . 37g34.2.8 Receiver Spurious

21、 Response . 37g34.2.8.1 Receiver Spurious Response for Single Carrier 37g34.2.8.1.1 Definition. 37g34.2.8.1.2 Limits 37g34.2.8.1.3 Conformance . 38g34.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 38g34.2.8.2.1 Definition. 38g34.2.8.2.2 Limits 38g34.2.8.2.3 Conformance

22、. 38g34.2.9 Receiver Intermodulation Characteristics . 38g34.2.9.1 Receiver Intermodulation Characteristics for Single Carrier 38g34.2.9.1.1 Definition. 38g34.2.9.1.2 Limits 38g34.2.9.1.3 Conformance . 39g34.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands 39g3

23、4.2.9.2.1 Definition. 39g34.2.9.2.2 Limits 39g34.2.9.2.3 Conformance . 39g34.2.10 Receiver Spurious Emissions 39g3ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)5 4.2.10.1 Receiver Spurious Emissions for Single Carrier . 39g34.2.10.1.1 Definition. 39g34.2.10.1.2 Limits 39g34.2.10.1.3 Conformance . 40g34.2.

24、10.2 Receiver Spurious Emissions in DL-only bands . 40g34.2.10.2.1 Definition. 40g34.2.10.2.2 Limits 40g34.2.10.2.3 Conformance . 40g34.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 40g34.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 40g34.2.11.1.1 Definition

25、. 40g34.2.11.1.2 Limits 40g34.2.11.1.3 Conformance . 41g34.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 41g34.2.11.2.1 Definition. 41g34.2.11.2.2 Limits 42g34.2.11.2.3 Conformance . 42g34.2.11.3 Transmitter adjacent channel

26、leakage power ratio for UL-MIMO 43g34.2.11.3.1 Definition. 43g34.2.11.3.2 Limits 43g34.2.11.3.3 Conformance . 44g34.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 44g34.2.11.4.1 Definition. 44g34.2.11.4.2 Limits 44g34.2.11.4.3 Conformance .

27、 44g35 Testing for compliance with technical requirements 45g35.1 Environmental conditions for testing . 45g35.2 Interpretation of the measurement results 45g35.3 Essential radio test suites 46g35.3.1 Transmitter Maximum Output Power . 46g35.3.1.1 Transmitter maximum output power for Single Carrier

28、46g35.3.1.1.1 Method of test 46g35.3.1.1.2 Test requirements 47g35.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 47g35.3.1.2.1 Method of test 47g35.3.1.2.2 Test requirements 48g35.3.1.3 Transmitter maximum output power for UL-MIMO 48g35.3.1.

29、3.1 Method of test 48g35.3.1.3.2 Test requirements 48g35.3.2 Transmitter Spectrum Emission Mask 49g35.3.2.1 Transmitter spectrum emission mask for Single Carrier . 49g35.3.2.1.1 Method of test 49g35.3.2.1.2 Test requirements 49g35.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Ca

30、rrier Aggregation (DL CA and UL CA) . 49g35.3.2.2.1 Method of test 49g35.3.2.2.2 Test requirements 50g35.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 50g35.3.2.3.1 Method of test 50g35.3.2.3.2 Test requirements 51g35.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a

31、 component carrier 51g35.3.2.4.1 Method of test 51g35.3.2.4.2 Test requirements 52g35.3.3 Transmitter Spurious Emissions . 52g35.3.3.1 Transmitter spurious emissions for Single Carrier 52g35.3.3.1.1 Method of test 52g35.3.3.1.2 Test requirements 53g3ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)6 5.3.3.2

32、Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 53g35.3.3.2.1 Method of test 53g35.3.3.2.2 Test requirements 54g35.3.3.3 Transmitter spurious emissions for UL-MIMO 54g35.3.3.3.1 Method of test 54g35.3.3.3.2 Test requirements 54g35.3.3.4 Transmitter spur

33、ious emissions for Multi-Cluster PUSCH within a component carrier . 55g35.3.3.4.1 Method of test 55g35.3.3.4.2 Test requirements 55g35.3.4 Transmitter Minimum Output Power 55g35.3.4.1 Transmitter minimum output power for Single Carrier. 55g35.3.4.1.1 Method of test 55g35.3.4.1.2 Test requirements 56

34、g35.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 56g35.3.4.2.1 Method of test 56g35.3.4.2.2 Test requirements 57g35.3.4.3 Transmitter minimum output power for UL-MIMO . 57g35.3.4.3.1 Method of test 57g35.3.4.3.2 Test requirements 58g35.3.5

35、Receiver Adjacent Channel Selectivity (ACS) . 58g35.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier 58g35.3.5.1.1 Method of test 58g35.3.5.1.2 Test requirements 59g35.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 59g35.3.5.2.1 Method

36、of test 59g35.3.5.2.2 Test requirements 60g35.3.6 Receiver Blocking Characteristics 60g35.3.6.1 Receiver Blocking Characteristics for Single Carrier . 60g35.3.6.1.1 Method of test 60g35.3.6.1.2 Test requirements 62g35.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands .

37、 62g35.3.6.2.1 Method of test 62g35.3.6.2.2 Test requirements 64g35.3.7 Receiver Spurious Response . 64g35.3.7.1 Receiver Spurious Response for Single Carrier 64g35.3.7.1.1 Method of test 64g35.3.7.1.2 Test requirements 65g35.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands

38、. 65g35.3.7.2.1 Method of test 65g35.3.7.2.2 Test requirements 65g35.3.8 Receiver Intermodulation Characteristics . 66g35.3.8.1 Receiver Intermodulation Characteristics for Single Carrier 66g35.3.8.1.1 Method of test 66g35.3.8.1.2 Test requirements 66g35.3.8.2 Receiver Intermodulation Characteristic

39、s for Carrier Aggregation in DL-only bands 67g35.3.8.2.1 Method of test 67g35.3.8.2.2 Test requirements 67g35.3.9 Receiver Spurious Emissions 68g35.3.9.1 Receiver Spurious Emissions for Single Carrier . 68g35.3.9.1.1 Method of test 68g35.3.9.1.2 Test requirements 68g35.3.9.2 Receiver Spurious Emissi

40、ons in DL-only bands . 68g35.3.9.2.1 Method of test 68g35.3.9.2.2 Test requirements 69g35.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 69g35.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 69g35.3.10.1.1 Method of test 69g35.3.10.1.2 Test requirements 70g35.3.

41、10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 70g3ETSI ETSI EN 301 908-13 V7.1.1 (2015-12)7 5.3.10.2.1 Method of test 70g35.3.10.2.2 Test requirements 71g35.3.10.3 Transmitter adjacent channel leakage power ratio for UL-MIMO 71

42、g35.3.10.3.1 Method of test 71g35.3.10.3.2 Test requirements 72g35.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 72g35.3.10.4.1 Method of test 72g35.3.10.4.2 Test requirements 73g3Annex A (normative): HS Requirements and conformance Test s

43、pecifications Table (HS-RTT) 74g3Annex B (normative): Environmental profile . 76g3B.1 General . 76g3B.1.1 Introduction 76g3B.1.2 Temperature . 76g3B.1.3 Voltage . 76g3B.1.4 Test environment 77g3Annex C: Void 78g3Annex D (informative): Bibliography . 79g3History 80g3ETSI ETSI EN 301 908-13 V7.1.1 (20

44、15-12)8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual

45、Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR s

46、earches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has bee

47、n produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been produced by ETSI in response to mandates M/284 and M/406 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.10. The title and reference to the present d

48、ocument are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonised Standard under the Directive 1999/5/EC i.2. The requirements relevant to Directive 1999/5/EC i.2 are summarized in annex A. The present document is part 13 of a

49、 multi-part deliverable. Full details of the entire series can be found in part 1 i.13. National transposition dates Date of adoption of this EN: 14 December 2015 Date of latest announcement of this EN (doa): 31 March 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 September 2016 Date of withdrawal of any conflicting National Standard (dow): 30 September 2017 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be in