ETSI EN 301 908-13-2016 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU Part 13 Evolved Universal Terrestri.pdf

1、 ETSI EN 301 908-13 V11.1.1 (2016-07) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-13 V11.1

2、1 (2016-07) 2 Reference REN/MSG-TFES-11-13-RED Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, LTE-Advanced, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and

4、/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、 kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatu

6、s.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocop

7、ying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016

8、 All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regist

9、ered and owned by the GSM Association. ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 3 Contents Intellectual Property Rights 8g3Foreword . 8g3Modal verbs terminology 8g3Introduction 8g31 Scope 9g32 References 11g32.1 Normative references . 11g32.2 Informative references 11g33 Definitions, symbols and ab

10、breviations . 12g33.1 Definitions 12g33.2 Symbols 15g33.3 Abbreviations . 16g34 Technical requirements specifications . 18g34.1 Environmental profile . 18g34.2 Conformance requirements 18g34.2.0 General 18g34.2.1 Introduction. 18g34.2.2 Transmitter Maximum Output Power . 19g34.2.2.1 Transmitter maxi

11、mum output power for Single Carrier 19g34.2.2.1.1 Definition. 19g34.2.2.1.2 Limits 19g34.2.2.1.3 Conformance . 19g34.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19g34.2.2.2.1 Definition. 19g34.2.2.2.2 Limits 20g34.2.2.2.3 Conformance . 20g34.2.2.3

12、Transmitter output power for UL-MIMO . 20g34.2.2.3.1 Definition. 20g34.2.2.3.2 Limits 21g34.2.2.3.3 Conformance . 21g34.2.3 Transmitter Spectrum Emission Mask 21g34.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21g34.2.3.1.1 Definition. 21g34.2.3.1.2 Limits 21g34.2.3.1.3 Conformance

13、 23g34.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 23g34.2.3.2.1 Definition. 23g34.2.3.2.2 Limits 23g34.2.3.2.3 Conformance . 24g34.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24g34.2.3.3.1 Definition. 24g34.2.3.3.2 Limits 24

14、g34.2.3.3.3 Conformance . 24g34.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier 24g34.2.3.4.1 Definition. 24g34.2.3.4.2 Limits 25g34.2.3.4.3 Conformance . 25g34.2.4 Transmitter Spurious Emissions . 25g34.2.4.1 Transmitter spurious emissions for Single Carr

15、ier 25g34.2.4.1.1 Definition. 25g34.2.4.1.2 Limits 25g34.2.4.1.3 Conformance . 28g3ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 4 4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 28g34.2.4.2.1 Definition. 28g34.2.4.2.2 Limits 28g34.2.4.2.3 Conforman

16、ce . 30g34.2.4.3 Transmitter spurious emissions for UL-MIMO 31g34.2.4.3.1 Definition. 31g34.2.4.3.2 Limits 31g34.2.4.3.3 Conformance . 31g34.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31g34.2.4.4.1 Definition. 31g34.2.4.4.2 Limits 31g34.2.4.4.3 Conforma

17、nce . 31g34.2.5 Transmitter Minimum Output Power 31g34.2.5.1 Transmitter minimum output power for Single Carrier. 31g34.2.5.1.1 Definition. 31g34.2.5.1.2 Limits 32g34.2.5.1.3 Conformance . 32g34.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) .

18、32g34.2.5.2.1 Definition. 32g34.2.5.2.2 Limits 32g34.2.5.2.3 Conformance . 32g34.2.5.3 Transmitter minimum output power for UL-MIMO . 32g34.2.5.3.1 Definition. 32g34.2.5.3.2 Limits 33g34.2.5.3.3 Conformance . 33g34.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33g34.2.6.1 Receiver Adjacent Chann

19、el Selectivity (ACS) for Single Carrier 33g34.2.6.1.1 Definition. 33g34.2.6.1.2 Limits 33g34.2.6.1.3 Conformance . 34g34.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 34g34.2.6.2.1 Definition. 34g34.2.6.2.2 Limits 34g34.2.6.2.3 Conformance . 34g34.2.7 Rec

20、eiver Blocking Characteristics 35g34.2.7.1 Receiver Blocking Characteristics for Single Carrier . 35g34.2.7.1.1 Definition. 35g34.2.7.1.2 Limits 35g34.2.7.1.3 Conformance . 36g34.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 37g34.2.7.2.1 Definition. 37g34.2.7.2.

21、2 Limits 37g34.2.7.2.3 Conformance . 38g34.2.8 Receiver Spurious Response . 38g34.2.8.1 Receiver Spurious Response for Single Carrier 38g34.2.8.1.1 Definition. 38g34.2.8.1.2 Limits 38g34.2.8.1.3 Conformance . 39g34.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 39g34.2.8

22、2.1 Definition. 39g34.2.8.2.2 Limits 39g34.2.8.2.3 Conformance . 39g34.2.9 Receiver Intermodulation Characteristics . 39g34.2.9.1 Receiver Intermodulation Characteristics for Single Carrier 39g34.2.9.1.1 Definition. 39g34.2.9.1.2 Limits 39g34.2.9.1.3 Conformance . 40g34.2.9.2 Receiver Intermodulati

23、on Characteristics for Carrier Aggregation in DL-only bands 40g34.2.9.2.1 Definition. 40g34.2.9.2.2 Limits 40g3ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 5 4.2.9.2.3 Conformance . 40g34.2.10 Receiver Spurious Emissions 40g34.2.10.1 Receiver Spurious Emissions for Single Carrier . 40g34.2.10.1.1 Defin

24、ition. 40g34.2.10.1.2 Limits 41g34.2.10.1.3 Conformance . 41g34.2.10.2 Receiver Spurious Emissions in DL-only bands . 41g34.2.10.2.1 Definition. 41g34.2.10.2.2 Limits 41g34.2.10.2.3 Conformance . 41g34.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 41g34.2.11.1 Transmitter adjacent channel

25、leakage power ratio for Single Carrier . 41g34.2.11.1.1 Definition. 41g34.2.11.1.2 Limits 42g34.2.11.1.3 Conformance . 42g34.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 43g34.2.11.2.1 Definition. 43g34.2.11.2.2 Limits 43g34

26、2.11.2.3 Conformance . 44g34.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO 44g34.2.11.3.1 Definition. 44g34.2.11.3.2 Limits 44g34.2.11.3.3 Conformance . 45g34.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 45g34.2.11.

27、4.1 Definition. 45g34.2.11.4.2 Limits 45g34.2.11.4.3 Conformance . 45g34.2.12 Receiver Reference Sensitivity Level . 46g34.2.12.0 General 46g34.2.12.1 Receiver Reference Sensitivity Level for Single Carrier 46g34.2.12.1.1 Definition. 46g34.2.12.1.2 Limits 46g34.2.12.1.3 Conformance . 46g35 Testing f

28、or compliance with technical requirements 47g35.1 Environmental conditions for testing . 47g35.2 Interpretation of the measurement results 47g35.3 Essential radio test suites 48g35.3.0 General 48g35.3.1 Transmitter Maximum Output Power . 48g35.3.1.1 Transmitter maximum output power for Single Carrie

29、r 48g35.3.1.1.1 Method of test 48g35.3.1.1.2 Test requirements 49g35.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 49g35.3.1.2.1 Method of test 49g35.3.1.2.2 Test requirements 50g35.3.1.3 Transmitter maximum output power for UL-MIMO 50g35.3.

30、1.3.1 Method of test 50g35.3.1.3.2 Test requirements 50g35.3.2 Transmitter Spectrum Emission Mask 51g35.3.2.1 Transmitter spectrum emission mask for Single Carrier . 51g35.3.2.1.1 Method of test 51g35.3.2.1.2 Test requirements 51g35.3.2.2 Transmitter spectrum emission mask for intra-band contiguous

31、Carrier Aggregation (DL CA and UL CA) . 52g35.3.2.2.1 Method of test 52g35.3.2.2.2 Test requirements 52g35.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 53g35.3.2.3.1 Method of test 53g3ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 6 5.3.2.3.2 Test requirements 53g35.3.2.4 Transmitter spectrum

32、emission mask for Multi-Cluster PUSCH within a component carrier 53g35.3.2.4.1 Method of test 53g35.3.2.4.2 Test requirements 54g35.3.3 Transmitter Spurious Emissions . 54g35.3.3.1 Transmitter spurious emissions for Single Carrier 54g35.3.3.1.1 Method of test 54g35.3.3.1.2 Test requirements 55g35.3.

33、3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 55g35.3.3.2.1 Method of test 55g35.3.3.2.2 Test requirements 56g35.3.3.3 Transmitter spurious emissions for UL-MIMO 56g35.3.3.3.1 Method of test 56g35.3.3.3.2 Test requirements 57g35.3.3.4 Transmitter

34、spurious emissions for Multi-Cluster PUSCH within a component carrier . 57g35.3.3.4.1 Method of test 57g35.3.3.4.2 Test requirements 58g35.3.4 Transmitter Minimum Output Power 58g35.3.4.1 Transmitter minimum output power for Single Carrier. 58g35.3.4.1.1 Method of test 58g35.3.4.1.2 Test requirement

35、s 59g35.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 59g35.3.4.2.1 Method of test 59g35.3.4.2.2 Test requirements 59g35.3.4.3 Transmitter minimum output power for UL-MIMO . 60g35.3.4.3.1 Method of test 60g35.3.4.3.2 Test requirements 60g35.

36、3.5 Receiver Adjacent Channel Selectivity (ACS) . 60g35.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier 60g35.3.5.1.1 Method of test 60g35.3.5.1.2 Test requirements 61g35.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 62g35.3.5.2.1 Met

37、hod of test 62g35.3.5.2.2 Test requirements 63g35.3.6 Receiver Blocking Characteristics 63g35.3.6.1 Receiver Blocking Characteristics for Single Carrier . 63g35.3.6.1.1 Method of test 63g35.3.6.1.2 Test requirements 65g35.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only ban

38、ds . 65g35.3.6.2.1 Method of test 65g35.3.6.2.2 Test requirements 67g35.3.7 Receiver Spurious Response . 67g35.3.7.1 Receiver Spurious Response for Single Carrier 67g35.3.7.1.1 Method of test 67g35.3.7.1.2 Test requirements 68g35.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only ba

39、nds . 68g35.3.7.2.1 Method of test 68g35.3.7.2.2 Test requirements 68g35.3.8 Receiver Intermodulation Characteristics . 68g35.3.8.1 Receiver Intermodulation Characteristics for Single Carrier 68g35.3.8.1.1 Method of test 68g35.3.8.1.2 Test requirements 69g35.3.8.2 Receiver Intermodulation Characteri

40、stics for Carrier Aggregation in DL-only bands 69g35.3.8.2.1 Method of test 69g35.3.8.2.2 Test requirements 70g35.3.9 Receiver Spurious Emissions 70g35.3.9.1 Receiver Spurious Emissions for Single Carrier . 70g35.3.9.1.1 Method of test 70g35.3.9.1.2 Test requirements 71g35.3.9.2 Receiver Spurious Em

41、issions in DL-only bands . 71g3ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 7 5.3.9.2.1 Method of test 71g35.3.9.2.2 Test requirements 72g35.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 72g35.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 72g35.3.10.1.1 Method o

42、f test 72g35.3.10.1.2 Test requirements 73g35.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 73g35.3.10.2.1 Method of test 73g35.3.10.2.2 Test requirements 74g35.3.10.3 Transmitter adjacent channel leakage power ratio for UL-M

43、IMO 74g35.3.10.3.1 Method of test 74g35.3.10.3.2 Test requirements 75g35.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 75g35.3.10.4.1 Method of test 75g35.3.10.4.2 Test requirements 76g35.3.11 Receiver Reference Sensitivity Level . 76g35.3

44、11.1 Receiver Reference Sensitivity Level for Single Carrier 76g35.3.11.1.1 Method of test 76g35.3.11.1.2 Test requirements 77g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 78g3Annex B (normative): Environmental profile . 79

45、g3B.1 General . 79g3B.1.1 Introduction 79g3B.1.2 Temperature . 79g3B.1.3 Voltage . 79g3B.1.4 Test environment 80g3Annex C (informative): Bibliography . 81g3History 82g3ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 8 Intellectual Property Rights IPRs essential or potentially essential to the present docu

46、ment may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of

47、 ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other

48、IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the

49、present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.9 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses o