ETSI EN 301 908-13-2017 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of Directive 2014 53 EU Part 13 Evolved Universal Terrestrial R_1.pdf

1、 ETSI EN 301 908-13 V11.1.2 (2017-07) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-13 V11.1.2 (

2、2017-07) 2 Reference REN/MSG-TFES-11-13-RED-C1 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, LTE-Advanced, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/

4、or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus

6、.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopy

7、ing and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM,

8、UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are trademar

9、ks registered and owned by the GSM Association. ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 3 Contents Intellectual Property Rights 8g3Foreword . 8g3Modal verbs terminology 8g3Introduction 9g31 Scope 10g32 References 12g32.1 Normative references . 12g32.2 Informative references 13g33 Definitions, symb

10、ols and abbreviations . 14g33.1 Definitions 14g33.2 Symbols 16g33.3 Abbreviations . 18g34 Technical requirements specifications . 19g34.1 Environmental profile . 19g34.2 Conformance requirements 19g34.2.0 General 19g34.2.1 Introduction. 20g34.2.2 Transmitter Maximum Output Power . 20g34.2.2.1 Transm

11、itter maximum output power for Single Carrier 20g34.2.2.1.1 Definition. 20g34.2.2.1.2 Limits 21g34.2.2.1.3 Conformance . 21g34.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 21g34.2.2.2.1 Definition. 21g34.2.2.2.2 Limits 22g34.2.2.2.3 Conformance . 22

12、g34.2.2.3 Transmitter output power for UL-MIMO . 22g34.2.2.3.1 Definition. 22g34.2.2.3.2 Limits 23g34.2.2.3.3 Conformance . 23g34.2.3 Transmitter Spectrum Emission Mask 23g34.2.3.1 Transmitter spectrum emission mask for Single Carrier . 23g34.2.3.1.1 Definition. 23g34.2.3.1.2 Limits 23g34.2.3.1.3 Co

13、nformance . 25g34.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 25g34.2.3.2.1 Definition. 25g34.2.3.2.2 Limits 25g34.2.3.2.3 Conformance . 26g34.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 26g34.2.3.3.1 Definition. 26g34.2.3.3.2

14、 Limits 26g34.2.3.3.3 Conformance . 26g34.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier 26g34.2.3.4.1 Definition. 26g34.2.3.4.2 Limits 27g34.2.3.4.3 Conformance . 27g34.2.4 Transmitter Spurious Emissions . 27g34.2.4.1 Transmitter spurious emissions for S

15、ingle Carrier 27g34.2.4.1.1 Definition. 27g34.2.4.1.2 Limits 27g34.2.4.1.3 Conformance . 30g3ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 4 4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 30g34.2.4.2.1 Definition. 30g34.2.4.2.2 Limits 30g34.2.4.2.3

16、 Conformance . 32g34.2.4.3 Transmitter spurious emissions for UL-MIMO 33g34.2.4.3.1 Definition. 33g34.2.4.3.2 Limits 33g34.2.4.3.3 Conformance . 33g34.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 33g34.2.4.4.1 Definition. 33g34.2.4.4.2 Limits 33g34.2.4.4.

17、3 Conformance . 33g34.2.5 Transmitter Minimum Output Power 33g34.2.5.1 Transmitter minimum output power for Single Carrier. 33g34.2.5.1.1 Definition. 33g34.2.5.1.2 Limits 34g34.2.5.1.3 Conformance . 34g34.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and

18、 UL CA) . 34g34.2.5.2.1 Definition. 34g34.2.5.2.2 Limits 34g34.2.5.2.3 Conformance . 34g34.2.5.3 Transmitter minimum output power for UL-MIMO . 34g34.2.5.3.1 Definition. 34g34.2.5.3.2 Limits 35g34.2.5.3.3 Conformance . 35g34.2.6 Receiver Adjacent Channel Selectivity (ACS) . 35g34.2.6.1 Receiver Adja

19、cent Channel Selectivity (ACS) for Single Carrier 35g34.2.6.1.1 Definition. 35g34.2.6.1.2 Limits 35g34.2.6.1.3 Conformance . 36g34.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 36g34.2.6.2.1 Definition. 36g34.2.6.2.2 Limits 36g34.2.6.2.3 Conformance . 36g

20、34.2.7 Receiver Blocking Characteristics 36g34.2.7.1 Receiver Blocking Characteristics for Single Carrier . 36g34.2.7.1.1 Definition. 36g34.2.7.1.2 Limits 37g34.2.7.1.3 Conformance . 38g34.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 38g34.2.7.2.1 Definition. 38

21、g34.2.7.2.2 Limits 39g34.2.7.2.3 Conformance . 40g34.2.8 Receiver Spurious Response . 40g34.2.8.1 Receiver Spurious Response for Single Carrier 40g34.2.8.1.1 Definition. 40g34.2.8.1.2 Limits 40g34.2.8.1.3 Conformance . 41g34.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands .

22、 41g34.2.8.2.1 Definition. 41g34.2.8.2.2 Limits 41g34.2.8.2.3 Conformance . 41g34.2.9 Receiver Intermodulation Characteristics . 41g34.2.9.1 Receiver Intermodulation Characteristics for Single Carrier 41g34.2.9.1.1 Definition. 41g34.2.9.1.2 Limits 41g34.2.9.1.3 Conformance . 42g34.2.9.2 Receiver Int

23、ermodulation Characteristics for Carrier Aggregation in DL-only bands 42g34.2.9.2.1 Definition. 42g34.2.9.2.2 Limits 42g3ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 5 4.2.9.2.3 Conformance . 42g34.2.10 Receiver Spurious Emissions 42g34.2.10.1 Receiver Spurious Emissions for Single Carrier . 42g34.2.10

24、.1.1 Definition. 42g34.2.10.1.2 Limits 43g34.2.10.1.3 Conformance . 43g34.2.10.2 Receiver Spurious Emissions in DL-only bands . 43g34.2.10.2.1 Definition. 43g34.2.10.2.2 Limits 43g34.2.10.2.3 Conformance . 43g34.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 43g34.2.11.1 Transmitter adjacen

25、t channel leakage power ratio for Single Carrier . 43g34.2.11.1.1 Definition. 43g34.2.11.1.2 Limits 44g34.2.11.1.3 Conformance . 44g34.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 45g34.2.11.2.1 Definition. 45g34.2.11.2.2 Li

26、mits 45g34.2.11.2.3 Conformance . 46g34.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO 46g34.2.11.3.1 Definition. 46g34.2.11.3.2 Limits 46g34.2.11.3.3 Conformance . 47g34.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 4

27、7g34.2.11.4.1 Definition. 47g34.2.11.4.2 Limits 47g34.2.11.4.3 Conformance . 47g34.2.12 Receiver Reference Sensitivity Level . 48g34.2.12.0 General 48g34.2.12.1 Receiver Reference Sensitivity Level for Single Carrier 48g34.2.12.1.1 Definition. 48g34.2.12.1.2 Limits 48g34.2.12.1.3 Conformance . 48g35

28、 Testing for compliance with technical requirements 49g35.1 Environmental conditions for testing . 49g35.2 Interpretation of the measurement results 49g35.3 Essential radio test suites 50g35.3.0 General 50g35.3.1 Transmitter Maximum Output Power . 50g35.3.1.1 Transmitter maximum output power for Sin

29、gle Carrier 50g35.3.1.1.1 Method of test 50g35.3.1.1.2 Test requirements 51g35.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 51g35.3.1.2.1 Method of test 51g35.3.1.2.2 Test requirements 52g35.3.1.3 Transmitter maximum output power for UL-MIM

30、O 52g35.3.1.3.1 Method of test 52g35.3.1.3.2 Test requirements 52g35.3.2 Transmitter Spectrum Emission Mask 53g35.3.2.1 Transmitter spectrum emission mask for Single Carrier . 53g35.3.2.1.1 Method of test 53g35.3.2.1.2 Test requirements 53g35.3.2.2 Transmitter spectrum emission mask for intra-band c

31、ontiguous Carrier Aggregation (DL CA and UL CA) . 54g35.3.2.2.1 Method of test 54g35.3.2.2.2 Test requirements 54g35.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 55g35.3.2.3.1 Method of test 55g3ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 6 5.3.2.3.2 Test requirements 55g35.3.2.4 Transmitter

32、 spectrum emission mask for Multi-Cluster PUSCH within a component carrier 55g35.3.2.4.1 Method of test 55g35.3.2.4.2 Test requirements 56g35.3.3 Transmitter Spurious Emissions . 56g35.3.3.1 Transmitter spurious emissions for Single Carrier 56g35.3.3.1.1 Method of test 56g35.3.3.1.2 Test requirement

33、s 57g35.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) 57g35.3.3.2.1 Method of test 57g35.3.3.2.2 Test requirements 58g35.3.3.3 Transmitter spurious emissions for UL-MIMO 58g35.3.3.3.1 Method of test 58g35.3.3.3.2 Test requirements 59g35.3.3.4 Tr

34、ansmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 59g35.3.3.4.1 Method of test 59g35.3.3.4.2 Test requirements 60g35.3.4 Transmitter Minimum Output Power 60g35.3.4.1 Transmitter minimum output power for Single Carrier. 60g35.3.4.1.1 Method of test 60g35.3.4.1.2 Test r

35、equirements 61g35.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 61g35.3.4.2.1 Method of test 61g35.3.4.2.2 Test requirements 61g35.3.4.3 Transmitter minimum output power for UL-MIMO . 62g35.3.4.3.1 Method of test 62g35.3.4.3.2 Test requireme

36、nts 62g35.3.5 Receiver Adjacent Channel Selectivity (ACS) . 62g35.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier 62g35.3.5.1.1 Method of test 62g35.3.5.1.2 Test requirements 64g35.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands 64g35.3

37、.5.2.1 Method of test 64g35.3.5.2.2 Test requirements 65g35.3.6 Receiver Blocking Characteristics 65g35.3.6.1 Receiver Blocking Characteristics for Single Carrier . 65g35.3.6.1.1 Method of test 65g35.3.6.1.2 Test requirements 67g35.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in D

38、L-only bands . 67g35.3.6.2.1 Method of test 67g35.3.6.2.2 Test requirements 69g35.3.7 Receiver Spurious Response . 69g35.3.7.1 Receiver Spurious Response for Single Carrier 69g35.3.7.1.1 Method of test 69g35.3.7.1.2 Test requirements 70g35.3.7.2 Receiver Spurious Response for Carrier Aggregation in

39、DL-only bands . 70g35.3.7.2.1 Method of test 70g35.3.7.2.2 Test requirements 70g35.3.8 Receiver Intermodulation Characteristics . 71g35.3.8.1 Receiver Intermodulation Characteristics for Single Carrier 71g35.3.8.1.1 Method of test 71g35.3.8.1.2 Test requirements 71g35.3.8.2 Receiver Intermodulation

40、Characteristics for Carrier Aggregation in DL-only bands 72g35.3.8.2.1 Method of test 72g35.3.8.2.2 Test requirements 73g35.3.9 Receiver Spurious Emissions 73g35.3.9.1 Receiver Spurious Emissions for Single Carrier . 73g35.3.9.1.1 Method of test 73g35.3.9.1.2 Test requirements 73g35.3.9.2 Receiver S

41、purious Emissions in DL-only bands . 73g3ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 7 5.3.9.2.1 Method of test 73g35.3.9.2.2 Test requirements 74g35.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 74g35.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 74g35.3.10.1.

42、1 Method of test 74g35.3.10.1.2 Test requirements 75g35.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 75g35.3.10.2.1 Method of test 75g35.3.10.2.2 Test requirements 76g35.3.10.3 Transmitter adjacent channel leakage power rati

43、o for UL-MIMO 77g35.3.10.3.1 Method of test 77g35.3.10.3.2 Test requirements 77g35.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier 78g35.3.10.4.1 Method of test 78g35.3.10.4.2 Test requirements 78g35.3.11 Receiver Reference Sensitivity Level

44、 . 79g35.3.11.1 Receiver Reference Sensitivity Level for Single Carrier 79g35.3.11.1.1 Method of test 79g35.3.11.1.2 Test requirements 79g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 80g3Annex B (normative): Environmental

45、profile . 81g3B.1 General . 81g3B.1.1 Introduction 81g3B.1.2 Temperature . 81g3B.1.3 Voltage . 81g3B.1.4 Test environment 82g3Annex C (informative): Bibliography . 83g3Annex D (informative): Change history . 84g3History 85g3ETSI ETSI EN 301 908-13 V11.1.2 (2017-07) 8 Intellectual Property Rights Ess

46、ential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs)

47、; Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been ca

48、rried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames wh

49、ich are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulato