ETSI EN 301 908-7-2011 IMT cellular networks Harmonized EN covering the essential requirements of article 3 2 of the R&TTE Directive Part 7 CDMA TDD (UTRA TDD) Base Stations (BS) (.pdf

1、 ETSI EN 301 908-7 V5.2.1 (2011-07)Harmonized European Standard IMT cellular networks;Harmonized EN covering the essential requirementsof article 3.2 of the RPart 7: CDMA TDD (UTRA TDD) Base Stations (BS)ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 2Reference REN/MSG-TFES-006-7 Keywords 3G, 3GPP, cellula

2、r, digital, IMB, IMT, IMT-2000, MBSFN, mobile, radio, regulation, TD-CDMA, TDD, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de G

3、rasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, th

4、e reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision

5、or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Co

6、pyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trad

7、e Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 908-7 V5.2.1 (2011-0

8、7) 3Contents Intellectual Property Rights 6g3Foreword . 6g3Introduction 7g31 Scope 8g32 References 8g32.1 Normative references . 9g32.2 Informative references 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 10g33.3 Abbreviations . 10g34 Technical requirements specific

9、ations . 11g34.1 Environmental profile . 11g34.2 Conformance requirements 12g34.2.1 Introduction. 12g34.2.2 Spectrum emission mask 12g34.2.2.1 Definition 12g34.2.2.1.1 3,84 Mcps TDD option 12g34.2.2.1.2 1,28 Mcps TDD option 12g34.2.2.1.3 7,68 Mcps TDD option 12g34.2.2.2 Limits 13g34.2.2.2.1 3,84 Mcp

10、s TDD option 13g34.2.2.2.2 1,28 Mcps TDD option 14g34.2.2.2.3 7,68 Mcps TDD option 15g34.2.2.3 Conformance . 16g34.2.3 Transmitter adjacent channel leakage power ratio 16g34.2.3.1 Definition 16g34.2.3.2 Limits 16g34.2.3.2.1 General requirements . 16g34.2.3.2.2 Co-existence with UTRA-FDD . 17g34.2.3.

11、2.3 Co-existence with unsynchronized UTRA TDD on adjacent channels . 18g34.2.3.3 Conformance . 20g34.2.4 Transmitter spurious emissions . 20g34.2.4.1 Definition 20g34.2.4.2 Limits 20g34.2.4.2.1 General requirements . 20g34.2.4.2.2 Co-existence with GSM900. 21g34.2.4.2.3 Co-existence with DCS1800 . 2

12、2g34.2.4.2.4 Co-existence with UTRA FDD . 22g34.2.4.2.5 Co-existence with unsynchronized TDD . 23g34.2.4.3 Conformance . 23g34.2.5 Base station maximum output power 23g34.2.5.1 Definition 23g34.2.5.2 Limits 23g34.2.5.3 Conformance . 23g34.2.6 Transmit intermodulation . 23g34.2.6.1 Definition 23g34.2

13、.6.2 Limits 23g34.2.6.2.1 3,84 Mcps TDD option 23g34.2.6.2.2 1,28 Mcps TDD option 24g34.2.6.2.3 7,68 Mcps TDD option 24g34.2.6.3 Conformance . 24g34.2.7 Receiver spurious emissions . 24g3ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 44.2.7.1 Definition 24g34.2.7.2 Limits 24g34.2.7.2.1 3,84 Mcps TDD option

14、 25g34.2.7.2.2 1,28 Mcps TDD option 25g34.2.7.2.3 7,68 Mcps TDD option 25g34.2.7.3 Conformance . 25g34.2.8 Receiver blocking characteristics . 26g34.2.8.1 Definition 26g34.2.8.2 Limits 26g34.2.8.2.1 3,84 Mcps TDD option 26g34.2.8.2.2 1,28 Mcps TDD option 27g34.2.8.2.3 7,68 Mcps TDD option 28g34.2.8.

15、3 Conformance . 29g34.2.9 Receiver intermodulation characteristics 30g34.2.9.1 Definition 30g34.2.9.2 Limits 30g34.2.9.2.1 3,84 Mcps TDD option 30g34.2.9.2.2 1,28 Mcps TDD option 30g34.2.9.2.3 7,68 Mcps TDD option 31g34.2.9.3 Conformance . 31g34.2.10 Receiver adjacent channel selectivity . 31g34.2.1

16、0.1 Definition 31g34.2.10.2 Limits 31g34.2.10.2.1 3,84 Mcps TDD option 31g34.2.10.2.2 1,28 Mcps TDD option 32g34.2.10.2.3 7,68 Mcps TDD option 32g34.2.10.3 Conformance . 33g35 Testing for compliance with technical requirements 33g35.1 Environmental conditions for testing . 33g35.2 Interpretation of

17、the measurement results 33g35.3 Essential radio test suites 35g35.3.1 Spectrum emission mask 35g35.3.1.1 Method of test . 35g35.3.1.1.1 Initial conditions 35g35.3.1.1.2 Procedure . 38g35.3.1.2 Test requirements 38g35.3.1.2.1 3,84 Mcps TDD option 38g35.3.1.2.2 1,28 Mcps TDD option 39g35.3.1.2.3 7,68

18、Mcps TDD option 39g35.3.2 Transmitter adjacent channel leakage power ratio 39g35.3.2.1 Method of test . 39g35.3.2.1.1 Initial conditions 39g35.3.2.1.2 Procedure . 42g35.3.2.2 Test requirements 44g35.3.2.2.1 3,84 Mcps TDD option 44g35.3.2.2.2 1,28 Mcps TDD option 44g35.3.2.2.3 7,68 Mcps TDD option 44

19、g35.3.3 Transmitter spurious emissions . 44g35.3.3.1 Method of test . 44g35.3.3.1.1 Initial conditions 44g35.3.3.1.2 Procedure . 47g35.3.3.2 Test requirements 47g35.3.4 Base station maximum output power 47g35.3.4.1 Method of test . 47g35.3.4.1.1 Initial conditions 47g35.3.4.1.2 Procedure . 49g35.3.4

20、.2 Test requirements 49g35.3.5 Transmit intermodulation . 49g35.3.5.1 Method of test . 49g35.3.5.1.1 Initial conditions 49g35.3.5.1.2 Procedure . 55g3ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 55.3.5.2 Test requirements 55g35.3.6 Receiver spurious emissions . 55g35.3.6.1 Method of test . 55g35.3.6.1.1

21、Initial conditions 55g35.3.6.1.2 Procedure . 56g35.3.6.2 Test requirements 58g35.3.7 Receiver blocking characteristics . 58g35.3.7.1 Method of test . 58g35.3.7.1.1 Initial conditions 58g35.3.7.1.2 Procedure . 59g35.3.7.2 Test requirements 60g35.3.8 Receiver intermodulation characteristics 60g35.3.8.

22、1 Method of test . 60g35.3.8.1.1 Initial conditions 60g35.3.8.1.2 Procedure . 61g35.3.8.2 Test requirements 61g35.3.9 Receiver adjacent channel selectivity . 61g35.3.9.1 Method of test . 61g35.3.9.1.1 Initial conditions 61g35.3.9.1.2 Procedure . 63g35.3.9.1.3 Test requirements 63g3Annex A (normative

23、): HS Requirements and conformance Test specifications Table (HS-RTT) 64g3Annex B (normative): BS configurations . 66g3B.1 Receiver Diversity 66g3B.2 Power Supply options . 66g3B.3 Ancillary RF amplifiers 66g3B.4 BS using antenna arrays . 66g3B.4.1 Receiver tests 67g3B.4.2 Transmitter tests . 67g3An

24、nex C (informative): Environmental profile specification . 68g3Annex D (informative): The EN title in the official languages . 69g3Annex E (informative): Bibliography . 70g3History 71g3ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 6Intellectual Property Rights IPRs essential or potentially essential to th

25、e present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI

26、 in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existen

27、ce of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present d

28、ocument has been produced by ETSI in response to mandate M/284 from the European Commission issued under Council Directive 98/34/EC i.1 (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present do

29、cument are intended to included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.2. See article 5.1 of Directive 1999/5/EC i.2 for information on presumption of conformity and Harmonised Standards or part

30、s thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC i.2 are summarised in annex A. The present document is part 7 of a multi-part deliverable covering the essential requirements under article 3.2 of Dir

31、ective 1999/5/EC i.2 (R Part 2: “CDMA Direct Spread (UTRA FDD) User Equipment (UE)“; Part 3: “CDMA Direct Spread (UTRA FDD) Base Stations (BS)“; Part 4: “CDMA Multi-Carrier (cdma2000) User Equipment (UE)“; Part 5: “CDMA Multi-Carrier (cdma2000) Base Stations (BS)“; Part 6: “CDMA TDD (UTRA TDD) User

32、Equipment (UE)“; Part 7: “CDMA TDD (UTRA TDD) Base Stations (BS)“; Part 8: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R Part 9: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements o

33、f article 3.2 of the R Part 10: “Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Part 11: “CDMA Direct Spread (UTRA FDD) (Repeaters)“; Part 12: “Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requireme

34、nts of article 3.2 of the R Part 13: “Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)“; ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 7Part 14: “Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)“; Part 15: “Evolved Universal Terrestrial Radio Access (E-UTRA FDD

35、) (Repeaters)“; Part 16: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R Part 17: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential req

36、uirements of article 3.2 of the R Part 18: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“; Part 19: “OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)“; Part 20: “OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)“; Part 21: “OFDMA TDD WMAN (Mobile WiMAX) FDD User Equ

37、ipment (UE)“; Part 22: “OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)“. National transposition dates Date of adoption of this EN: 4 July 2011 Date of latest announcement of this EN (doa): 31 October 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30

38、 April 2012 Date of withdrawal of any conflicting National Standard (dow): 30 April 2013 Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of th

39、e R 1,28 Mcps TDD option Base Stations for Releases 4, 5, 6, 7, 8 and 9; 7,68 Mcps TDD option Base Stations for Releases 7, 8 and 9. For the case of IMB, only the 3,84 Mcps UTRA TDD option applies. For general purpose Base Stations of Releases 99 and 4 only the requirements for Wide Area Base Statio

40、ns apply. The present document is intended to cover the provisions of Directive 1999/5/EC i.2 (R Base Station (BS) radio transmission and reception (TDD) (3GPP TS 25.105 version 9.2.0 Release 9)“. 3 ETSI TS 125 142 (V9.4.0): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) confo

41、rmance testing (TDD) (3GPP TS 25.142 version 9.4.0 Release 9)“. 4 ITU-R Recommendation SM.329-11 (2011): “Unwanted emissions in the spurious domain“. 5 ETSI EN 301 908-1 (V5.2.1): “IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R A guide to the product

42、ion of Harmonized Standards for application under the R Uncertainties in the measurement of mobile radio equipment characteristics“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: ancillary RF amplifier: p

43、iece of equipment, which when connected by RF coaxial cables to the BS, has the primary function to provide amplification between the transmit and/or receive antenna connector of a BS and an antenna without requiring any control signal to fulfil its amplifying function B: appropriate frequency in th

44、e Bottom of the operating frequency band of the BS: “RF channel“ Base Station class: wide area Base Station or local area Base Station, as declared by the manufacturer chip rate: rate of “chips“ (modulated symbols after spreading) per second DPCHo: mechanism used to simulate an individual intracell

45、interferer in the cell with one code and a spreading factor of 16 environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the provisions of the present document Fuw: frequency offset of the unwanted interferin

46、g signal from the assigned channel frequency of the wanted signal ETSI ETSI EN 301 908-7 V5.2.1 (2011-07) 10local area Base Station: Base Station, characterized by requirements derived from Pico Cell scenarios with a BS to UE coupling loss equals to 45 dB M: appropriate frequency in the Middle of th

47、e operating frequency band of the BS: “RF channel“ maximum output power (Pmax): mean power level per carrier of the Base Station measured at the antenna connector in a specific reference condition, where the period of measurement is a transmit timeslot excluding the guard period MBSFN-only UE: UE op

48、erable in receive mode only (for the purpose of MBSFN reception) mean power: when applied to a CDMA modulated signal this is the power (transmitted or received) in a bandwidth of at least (1 + ) times the chip rate of the radio access mode, where the period of measurement is a transmit timeslot excl

49、uding the guard period unless otherwise stated operating band: frequency range that is defined with a specific set of technical requirements, in which UTRA TDD operates NOTE: The operating band(s) for a UTRA TDD BS is declared by the manufacturer according to the designations in table 1-1. Operating bands for UTRA are designated with Roman numerals, while the corresponding operating bands for E-UTRA are designated with Arabic numerals. output power: mean power of one carrier of the Base Station, delivered to a load with resistance equal to the nominal lo