ETSI EN 301 919-2004 Private Integrated Services Network (PISN) Inter-exchange signalling protocol Single step call transfer supplementary service (V1 1 1 ISO IEC 19460 (2003) modi_1.pdf

1、 ETSI EN 301 919 V1.1.1 (2004-01)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Inter-exchange signalling protocol;Single step call transfer supplementary serviceISO/IEC 19460 (2003), modifiedETSI ETSI EN 301 919 V1.1.1 (2004-01) 2 Reference DEN/ECMA-00188 K

2、eywords endorsement, PINX, PISN, QSIG, stage 3, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78

3、03/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference ver

4、sion is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of st

5、atus. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permis

6、sion. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Ma

7、rks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 919 V1.1.1 (2004-01) 3 Intellectual Property Rights IPRs essential or potentially essential to the

8、 present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI

9、in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as

10、 to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those o

11、f the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digital Network (ISDN) concepts as develope

12、d by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the signalling protocol for use at the Q reference point in support of the Call Transfer supplementary service. The protocol defined in the present docum

13、ent forms part of the PSS1 protocol (informally known as QSIG). The present document endorses an International Standard, ISO/IEC 19460. National transposition dates Date of adoption of this EN: 19 December 2003 Date of latest announcement of this EN (doa): 31 March 2004 Date of latest publication of

14、 new National Standard or endorsement of this EN (dop/e): 30 September 2004 Date of withdrawal of any conflicting National Standard (dow): 30 September 2004 Endorsement notice The elements of International Standard ISO/IEC 19460 (2003) apply, with the following modifications. ETSI ETSI EN 301 919 V1

15、.1.1 (2004-01) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non

16、-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normati

17、ve references at the end of clause 3: 21 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/IEC 11571 (1998), modified“. 22 ETSI EN 300 172: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Circuit-mode basic services ISO/IEC 11572 (2000), mo

18、dified“. 23 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modified“. 24 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Reference configuratio

19、n; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 25 ETSI EN 300 239: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Generic functional protocol for the support of supplementary services ISO/IEC 11582 (2002), modified“.

20、26 ETSI EN 300 238: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Name identification supplementary service ISO/IEC 13868 (2003), modified“. 27 ETSI EN 300 261: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call transfer supplemen

21、tary service ISO/IEC 13869 (2003), modified“. 28 ETSI EN 300 257: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call diversion supplementary service ISO/IEC 13873 (2003), modified“. 29 ETSI EN 300 259: “Private Integrated Services Network (PISN); Inter-exchange sig

22、nalling protocol; Path replacement Additional Network Feature (ANF) ISO/IEC 13874 (2003), modified“. 30 ETSI EN 301 264: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Advice of charge supplementary services ISO/IEC 15050 (2003), modified“. 31 ETSI EN 301 265: “Priv

23、ate Integrated Services Network (PISN); Inter-exchange signalling protocol; Call interception Additional Network Feature (ANF) ISO/IEC 15054 (2003), modified“. 32 ETSI EN 301 048: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Transit counter additional network feat

24、ure ISO/IEC 15056 (1997), modified“. 33 ETSI EN 301 820: “Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Common information Additional Network Feature (ANF) ISO/IEC 15772 (2003), modified“. ETSI ETSI EN 301 919 V1.1.1 (2004-01) 5 34 ETSI EN 301 656: “Private Integrat

25、ed Services Network (PISN); Inter-exchange signalling protocol; Call priority interruption and call priority interruption protection supplementary services ISO/IEC 15992 (2003), modified“. 35 ETSI EN 301 918: “Private Integrated Services Network (PISN); Specification, functional model and informatio

26、n flows; Single step call transfer supplementary service ISO/IEC 19459 (2001), modified“. Throughout the text of ISO/IEC 19460 Replace references as shown in the table below. Reference in ISO/IEC 19460 Modified reference ISO/IEC 11571 EN 300 189 21 ISO/IEC 11572 EN 300 172 22 ISO/IEC 11574 EN 300 17

27、1 23 ISO/IEC 11579-1 ETS 300 475-1 24 ISO/IEC 11582 EN 300 239 25 ISO/IEC 13868 EN 300 238 26 ISO/IEC 13869 EN 300 261 27 ISO/IEC 13873 EN 300 257 28 ISO/IEC 13874 EN 300 259 29 ISO/IEC 15050 EN 301 264 30 ISO/IEC 15054 EN 301 265 31 ISO/IEC 15056 EN 301 048 32 ISO/IEC 15772 EN 301 820 33 ISO/IEC 15

28、992 EN 301 656 34 ISO/IEC 19459 EN 301 918 35 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 919 V1.1.1 (2004-01) 6 History Document history V1.1.1 August 2003 One-step Approval Procedure OAP 20031219: 2003-08-20 to 2003-12-19 V1.1.1 January 2004 Publication