ETSI EN 302 065-1-2016 Short Range Devices (SRD) using Ultra Wide Band technology (UWB) Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014.pdf

1、 ETSI EN 302 065-1 V2.1.1 (2016-11) Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications HARMONISED EUROPEAN STANDARD ETSI ETSI EN 302 06

2、5-1 V2.1.1 (2016-11) 2 Reference REN/ERM-TGUWB-128 Keywords harmonised standard, radio, SRD, testing, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre l

3、a Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s

4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS

5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present doc

6、ument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by w

7、ritten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM,

8、UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI

9、ETSI EN 302 065-1 V2.1.1 (2016-11) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g31 Scope 7g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviati

10、ons . 9g34 Technical requirements specifications . 10g34.1 Environmental conditions . 10g34.2 General . 10g34.3 Transmitter Conformance Requirements 11g34.3.1 Operating Bandwidth 11g34.3.1.1 Applicability 11g34.3.1.2 Description 11g34.3.1.3 Limits 11g34.3.1.4 Conformance . 11g34.3.2 Maximum Value of

11、 Mean Power Spectral Density 12g34.3.2.1 Applicability 12g34.3.2.2 Description 12g34.3.2.3 Limits 12g34.3.2.4 Conformance . 12g34.3.3 Maximum value of peak power 12g34.3.3.1 Applicability 12g34.3.3.2 Description 12g34.3.3.3 Limits 12g34.3.3.4 Conformance . 13g34.3.4 Exterior Limits 13g34.3.5 Total P

12、ower. 13g34.3.6 Other Emissions 13g34.3.6.1 Applicability 13g34.3.6.2 Description 13g34.3.6.3 Limits 13g34.3.6.4 Conformance . 14g34.3.7 Transmitter Unwanted Emissions . 14g34.4 Receiver Conformance Requirements 14g34.4.1 General 14g34.4.2 Receiver spurious emissions . 14g34.4.2.1 Applicability 14g3

13、4.4.2.2 Description 14g34.4.2.3 Limits 14g34.4.2.4 Conformance . 15g34.4.3 Receiver interference handling . 15g34.4.3.1 Applicability 15g34.4.3.2 Description 15g34.4.3.3 Limits 15g34.4.3.4 Conformance . 15g34.5 Requirements for Spectrum Access 15g34.5.1 Detect and Avoid (DAA) 15g34.5.1.1 Applicabili

14、ty 15g34.5.1.2 Description 15g3ETSI ETSI EN 302 065-1 V2.1.1 (2016-11) 4 4.5.1.3 Limits 16g34.5.1.4 Conformance . 16g34.5.2 Listen-Before-Talk (LBT) 16g34.5.3 Low Duty Cycle (LDC) 16g34.5.3.1 Applicability 16g34.5.3.2 Description 16g34.5.3.3 Limits 16g34.5.3.4 Conformance . 16g34.6 Antenna Requireme

15、nts . 16g34.7 Other Requirements and Mitigation techniques . 16g35 Testing for compliance with technical requirements 17g35.1 Environmental conditions for testing . 17g35.2 General conditions for testing 17g35.2.1 Product information 17g35.2.2 Requirements for the test modulation . 17g35.2.3 Test co

16、nditions, power supply and ambient temperatures 17g35.2.4 Choice of equipment for test suites . 17g35.2.5 Multiple Operating bandwidths and multiband equipment . 17g35.2.6 Testing of host connected equipment and plug-in radio devices 17g35.3 Interpretation of the measurement results 17g35.3.0 Genera

17、l 17g35.3.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty 18g35.3.2 Measurement uncertainty is greater than maximum acceptable uncertainty . 18g35.3.3 Emissions 18g36 Conformance test suits . 18g36.1 Introduction 18g36.2 Initial Measurement steps . 18g36.3 Radiated

18、measurements 18g36.3.1 General 18g36.3.2 Test sites and general arrangements for measurements involving the use of radiated fields 18g36.3.3 Guidance on the use of a radiation test site . 18g36.3.3.1 General 18g36.3.3.2 Range length. 18g36.3.4 Coupling of signals . 18g36.3.5 Standard test methods .

19、19g36.3.5.1 Generic measurement method . 19g36.3.5.1.1 Calibrated setup . 19g36.3.5.1.2 Substitution method. 19g36.3.6 Standard calibration method . 19g36.4 Conducted measurements . 19g36.4.1 General Setup 19g36.4.2 Specific Setup . 19g36.5 Conformance methods of measurement for transmitter . 19g36.

20、5.1 General 19g36.5.2 Method of measurements of the Ultra Wideband Emissions 19g36.5.3 Operating Bandwidth 19g36.5.4 Mean power spectral density measurements . 20g36.5.5 Peak power measurements 20g36.5.6 Exterior limit measurement. 20g36.5.7 Total Power . 20g36.5.8 Transmitter unwanted emissions . 2

21、0g36.6 Conformance methods of measurement for receiver 20g36.6.1 Receiver spurious emissions . 20g36.6.2 Receiver interference handling . 20g36.7 Conformance test suites for spectrum access . 20g36.7.1 Detect and Avoid (DAA) 20g36.7.2 Listen Before Talk 21g36.7.3 Low Duty Cycle 21g36.7.4 Conformance

22、 test suites for antenna requirements . 21g36.7.5 Other Test Suites . 21g3ETSI ETSI EN 302 065-1 V2.1.1 (2016-11) 5 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 22g3Annex B (informative): Application form for testing 24g3B.1

23、Introduction 24g3B.2 Product Information for ETSI EN 302 065-1, clause 5.2.1 24g3B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) 24g3B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined (host) equipment or test jig in case

24、of plug-in devices . 24g3B.3 Signal related Information for ETSI EN 302 065-1, clause 4.3 . 25g3B.3.1 Introduction 25g3B.3.2 Operating bandwidth(s) of the equipment 25g3B.3.3 The worst case mode for each of the following tests 25g3B.4 RX test Information for ETSI EN 302 065-1, clause 4.4 . 25g3B.4.1

25、 Introduction 25g3B.4.2 Performance criterion and level of performance 25g3B.4.3 Interfering signals . 25g3B.5 Information on spectrum access by ETSI EN 302 065-1, clause 4.5 . 26g3B.5.1 Introduction 26g3B.5.2 Spectrum access . 26g3B.6 Additional information provided by the applicant . 26g3B.6.1 Abo

26、ut the DUT . 26g3B.6.2 Additional items and/or supporting equipment provided . 26g3Annex C (normative): Equivalent mitigation techniques . 28g3C.1 Equivalent mitigation techniques and LDC limits . 28g3C.2 Test Procedure 28g3C.3 Limit . 28g3Annex D (informative): Measurement antenna, preamplifier, an

27、d cable specifications 29g3Annex E (informative): Bibliography . 30g3Annex F (informative): Change history . 31g3History 32g3ETSI ETSI EN 302 065-1 V2.1.1 (2016-11) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The info

28、rmation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the

29、 ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or th

30、e updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepar

31、ed under the Commissions standardisation request C(2015) 5376 final i.10 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repe

32、aling Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of con

33、formity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 1 of a multi-part deliverable covering Short Range Devices (SRD) using Ultra Wide Band technology (UWB), as identified below: Part 1: “Requirements for Generic UWB a

34、pplications“; Part 2: “Requirements for UWB location tracking“; Part 3: “Requirements for UWB devices for ground based vehicular applications“; Part 4: “Material Sensing devices using UWB technology below 10,6 GHz“. National transposition dates Date of adoption of this EN: 5 July 2016 Date of latest

35、 announcement of this EN (doa): 31 October 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 April 2017 Date of withdrawal of any conflicting National Standard (dow): 30 April 2018 Modal verbs terminology In the present document “shall“, “shall not“, “sho

36、uld“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. E

37、TSI ETSI EN 302 065-1 V2.1.1 (2016-11) 7 1 Scope The present document applies to transceivers, transmitters and receivers utilizing Ultra WideBand (UWB) technologies and used for short range applications. The present document applies to impulse, modified impulse and RF carrier based UWB communicatio

38、n technologies. The present document applies to fixed (indoor only), mobile or portable applications, e.g.: stand-alone radio equipment with or without its own control provisions; plug-in radio devices intended for use with, or within, a variety of host systems, e.g. personal computers, hand-held te

39、rminals, etc.; plug-in radio devices intended for use within combined equipment, e.g. cable modems, set-top boxes, access points, etc.; combined equipment or a combination of a plug-in radio device and a specific type of host equipment. As per the ECC/DEC/(06)04 i.2 and Decision 2007/131/EC i.4 and

40、its amendments i.5, i.6, the UWB transmitter equipment conforming to the present document is not to be installed at a fixed outdoor location, for use in flying models, aircraft and other forms of aviation. The present document applies to UWB equipment with an output connection used with a dedicated

41、antenna or UWB equipment with an integral antenna. Equipment covered by the present document operates in accordance with ECC/DEC(06)04 i.2 “The harmonised conditions for devices using Ultra-Wideband (UWB) technology in bands below 10,6 GHz“. These radio equipment types are capable of operating in al

42、l or part of the frequency bands given in table 1. Table 1: Permitted ranges of operation Permitted range of operation (see note 1) Transmit 30 MHz to 10,6 GHz Receive 30 MHz to 10,6 GHz Intended ranges of operation (preferred range of operating bandwidth), see note 2 Transmit 3,1 GHz to 4,8 GHz Rec

43、eive 3,1 GHz to 4,8 GHz Transmit 6,0 GHz to 9 GHz Receive 6,0 GHz to 9 GHz NOTE 1: Limits in table 2 clause 4.3.2 and table 3 clause 4.3.3 are to be met. NOTE 2: This is the preferred range for the operating bandwidth, as defined in clause 4.3.1. The present document does not apply to radio equipmen

44、t for which a specific harmonised standard applies as such harmonised standards may specify additional EN requirements relevant to the presumption of conformity under article 3.2 of the Directive 2014/53/EU i.1. ETSI ETSI EN 302 065-1 V2.1.1 (2016-11) 8 2 References 2.1 Normative references Referenc

45、es are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced docum

46、ents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a

47、re necessary for the application of the present document. 1 ETSI EN 303 883 (V1.1.1) (09-2016): “Short Range Devices (SRD) using Ultra Wide Band (UWB); Measurement Techniques“. 2 ETSI TS 102 754 (V1.3.1) (03-2013): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices

48、(SRD); Technical characteristics of Detect And Avoid (DAA) mitigation techniques for SRD equipment using Ultra Wideband (UWB) technology“. 3 Void. 4 ETSI TS 103 361 (V1.1.1) (03-2016): “Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Technical requirements, parameters and measureme

49、nt procedures under the Directive 2014/53/EU Support to update of UWB related harmonized standards“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing directive 1999/5/EC. i.2 CEPT E